jasmines提出的问题 -ubuntu

jasmines

Asked: 2021-06-05 07:15:57 +0800 CST

MS Teams 无法识别 Pipewire（但 Pulseaudio 可以）

3

最近我从 Pulseaudio 搬到了 Pipewire（在 Ubuntu 20.04 中用 Pipewire 替换 Pulseaudio）除了 Microsoft Teams 桌面应用程序（从 Microsoft 官方网站下载的 teams_1.4.00.7556_amd64.deb 包）外，一切都按预期工作：它显示没有可用的扬声器或麦克风. 如果我切换回 Pulseaudio，它可以正常工作。

我在这里找到了类似的讨论：https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/838#fromHistory 但我无法应用建议的解决方案（https://gitlab.freedesktop.org/ pipewire/pipewire/-/issues/838#note_875806）

编辑：

uname -a 

Linux 5.11.0-18-generic #19-Ubuntu SMP Fri May 7 14:22:03 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux

dpkg -l | grep pipewire
ii  libpipewire-0.3-0:amd64                                     0.3.29-2~ubuntu21.04                                                 amd64        libraries for the PipeWire multimedia server
ii  libpipewire-0.3-modules:amd64                               0.3.29-2~ubuntu21.04                                                 amd64        libraries for the PipeWire multimedia server - modules
ii  pipewire:amd64                                              0.3.29-2~ubuntu21.04                                                 amd64        audio and video processing engine multimedia server
rc  pipewire-audio-client-libraries:amd64                       0.3.29-2~ubuntu21.04                                                 amd64        PipeWire multimedia server - audio client libraries
ii  pipewire-bin                                                0.3.29-2~ubuntu21.04                                                 amd64        PipeWire multimedia server - programs
ii  pipewire-locales                                            0.3.29-2~ubuntu21.04                                                 all          locales for the PipeWire multimedia server - localization
ii  pipewire-media-session                                      0.3.29-2~ubuntu21.04                                                 amd64        PipeWire multimedia session manager
ii  pipewire-pulse                                              0.3.29-2~ubuntu21.04                                                 amd64        PipeWire PulseAudio daemon

如果我将指示的“blob 添加到 alsa-monitor.conf 文件”，则没有任何变化。

Teams 在 Google Chrome 91.0.4472.77-1 中作为 Web 应用程序工作。

jasmines

Asked: 2021-04-09 01:08:37 +0800 CST

apt-cache 显示错误的可用软件包版本

0

我对以下问题很生气。我在两台运行 Ubuntu 20.10 的机器上添加了 PPA (ppa:savoury1/encryption)。

在第一个上，我看到：

apt-cache policy openssl
openssl:
  Installato: 1.1.1j-1ubuntu0~20.10.sav0
  Candidato:  1.1.1f-1ubuntu4.3
  Tabella versione:
 *** 1.1.1j-1ubuntu0~20.10.sav0 500
        500 http://ppa.launchpad.net/savoury1/encryption/ubuntu groovy/main amd64 Packages
        100 /var/lib/dpkg/status
     1.1.1f-1ubuntu4.3 1000
        500 http://archive.ubuntu.com/ubuntu groovy-updates/main amd64 Packages
        500 http://security.ubuntu.com/ubuntu groovy-security/main amd64 Packages
     1.1.1f-1ubuntu4 1000
        500 http://archive.ubuntu.com/ubuntu groovy/main amd64 Packages

在第二个：

apt-cache policy openssl
openssl:
  Installato: 1.1.1j-1ubuntu0~20.10.sav0
  Candidato:  1.1.1j-1ubuntu0~20.10.sav0
  Tabella versione:
 *** 1.1.1j-1ubuntu0~20.10.sav0 500
        500 http://ppa.launchpad.net/savoury1/encryption/ubuntu groovy/main amd64 Packages
        100 /var/lib/dpkg/status
     1.1.1f-1ubuntu4.3 500
        500 http://archive.ubuntu.com/ubuntu groovy-updates/main amd64 Packages
        500 http://archive.ubuntu.com/ubuntu groovy-security/main amd64 Packages
     1.1.1f-1ubuntu4 500
        500 http://archive.ubuntu.com/ubuntu groovy/main amd64 Packages

为什么候选人不一样？

jasmines

Asked: 2019-10-11 00:50:28 +0800 CST

我应该维护同一个 Flatpak 包的多个版本吗？

2

#flatpak list
Name                                                          Application ID                                         Version               Branch             Installation
Authenticator                                                 com.github.bilelmoussaoui.Authenticator                3.32.2                stable             system
Skype                                                         com.skype.Client                                       8.51.0.72             stable             system
Freedesktop.org Application Platform version 1.6              org.freedesktop.Platform                               1.6                   1.6                system
Freedesktop Platform                                          org.freedesktop.Platform                               18.08.37              18.08              system
Freedesktop Platform                                          org.freedesktop.Platform                               19.08.3               19.08              system
default                                                       org.freedesktop.Platform.GL.default                                          19.08              system
nvidia-340-107                                                org.freedesktop.Platform.GL.nvidia-340-107                                   1.4                system
FFmpeg extension                                              org.freedesktop.Platform.ffmpeg                                              1.6                system
html5-codecs                                                  org.freedesktop.Platform.html5-codecs                                        18.08              system
openh264                                                      org.freedesktop.Platform.openh264                                            19.08              system
GNOME Application Platform version 3.34                       org.gnome.Platform                                                           3.34               system
Breeze Gtk theme                                              org.gtk.Gtk3theme.Breeze                                                     3.22               system

我可以在不破坏任何依赖关系的情况下卸载 Freedesktop.org 平台版本 1.6 和其他两个 Freedesktop 平台之一（哪个？）？

编辑：

~$ sudo flatpak remove --unused


        ID                                       Arch            Branch
 1. [-] org.freedesktop.Platform.ffmpeg          x86_64          1.6
 2. [-] org.freedesktop.Platform                 x86_64          1.6
 3. [-] org.freedesktop.Platform.Locale          x86_64          1.6
 4. [-] org.freedesktop.Platform                 x86_64          19.08
 5. [-] org.freedesktop.Platform.Locale          x86_64          19.08

Uninstall complete.
error: Refusing to operate on a user installation as root! This can lead to incorrect file ownership and permission errors.
~$ flatpak remove --unused
Nothing unused to uninstall

编辑2：

$ flatpak update 
Looking for updates…
Required runtime for org.freedesktop.Platform.GL.nvidia-340-107/x86_64/1.4 (runtime/org.freedesktop.Platform/x86_64/1.6) found in remote flathub
Do you want to install it? [Y/n]: y


        ID                                       Arch            Branch          Op         Remote          Download
 1. [✓] org.freedesktop.Platform                 x86_64          1.6             i          flathub                  184,4 MB / 395,4 MB
 2. [✓] org.freedesktop.Platform.ffmpeg          x86_64          1.6             i          flathub                    2,9 MB / 2,9 MB
 3. [✓] org.freedesktop.Platform.Locale          x86_64          1.6             i          flathub                  620,0 kB / 177,1 MB
 4. [✓] org.gnome.Platform                       x86_64          3.34            u          flathub                  253,8 kB / 318,4 MB
 5. [✓] org.gnome.Platform.Locale                x86_64          3.34            u          flathub         1.0 kB / 322,7 MB

Changes complete.
$ flatpak remove --unused


        ID                                       Arch            Branch
 1. [-] org.freedesktop.Platform.ffmpeg          x86_64          1.6
 2. [-] org.freedesktop.Platform                 x86_64          1.6
 3. [-] org.freedesktop.Platform.Locale          x86_64          1.6

Uninstall complete.
$ flatpak remove --unused
Nothing unused to uninstall
$ flatpak update 
Looking for updates…
Required runtime for org.freedesktop.Platform.GL.nvidia-340-107/x86_64/1.4 (runtime/org.freedesktop.Platform/x86_64/1.6) found in remote flathub
Do you want to install it? [Y/n]: y


        ID                                         Arch             Branch           Remote            Download
 1. [✓] org.freedesktop.Platform                   x86_64           1.6              flathub           184,4 MB / 395,4 MB
 2. [✓] org.freedesktop.Platform.ffmpeg            x86_64           1.6              flathub             2,9 MB / 2,9 MB
 3. [✓] org.freedesktop.Platform.Locale            x86_64           1.6              flathub           620,0 kB / 177,1 MB

Installation complete.
$ flatpak remove --unused


        ID                                       Arch            Branch
 1. [-] org.freedesktop.Platform.ffmpeg          x86_64          1.6
 2. [-] org.freedesktop.Platform                 x86_64          1.6
 3. [-] org.freedesktop.Platform.Locale          x86_64          1.6

Uninstall complete.
$ flatpak update 
Looking for updates…
Required runtime for org.freedesktop.Platform.GL.nvidia-340-107/x86_64/1.4 (runtime/org.freedesktop.Platform/x86_64/1.6) found in remote flathub
Do you want to install it? [Y/n]: 


        ID                                         Arch             Branch           Remote            Download
 1. [✓] org.freedesktop.Platform                   x86_64           1.6              flathub           184,4 MB / 395,4 MB
 2. [✓] org.freedesktop.Platform.ffmpeg            x86_64           1.6              flathub             2,9 MB / 2,9 MB
 3. [✓] org.freedesktop.Platform.Locale            x86_64           1.6              flathub           620,0 kB / 177,1 MB

Installation complete.

jasmines

Asked: 2018-03-31 00:10:14 +0800 CST

为什么在 kde 中显示桌面（带有 alt 选项卡）会交替呈现两种不同的东西？

7

如果我使用任务切换器显示桌面，我会第一次获得：

第二次：

以此类推。为什么？

jasmines

Asked: 2018-03-03 05:55:21 +0800 CST

打印屏幕键在 Kubuntu 上打开默认浏览器。怎么修？

0

如果我按下prt scrn键盘上的键，则会打开一个新的浏览器窗口（铬），地址指向http://ksnapshot/ 有人遇到同样的问题吗？

我在 Kubuntu 17.10，Plasma Desktop 5.12.2

PS：请注意，自 2015 年 12 月以来ksnapshot已被替换。kde-spectacle

jasmines

Asked: 2018-01-23 08:39:36 +0800 CST

为什么 android-tools-adb 和 android-tools-fastboot 包被标记为孤立？

0

我正在使用gtkorphan 0.4.4来摆脱一些未使用的软件包。即使我手动安装了以下内容，它们也会被列为孤儿：

android-tools-adb
android-tools-fastboot

为什么？

jasmines

Asked: 2017-10-28 02:07:30 +0800 CST

升级到 17.10 后 Unity 上的屏幕大小和快捷方式问题

8

升级后的两个问题：

在 Unity 会话中登录后，出现一个对话框错误，说

所需的虚拟大小不适合可用大小：请求=（1,1），最小=（320,200），最大=（8192,8192）

我想知道要求的尺寸（1,1）是什么，但不知道在哪里搜索......无论如何，我可以正常工作，但是（不知道它是否相关）：

没有全局键盘快捷键起作用（例如volumeUp/Down、Super-L 来阻止屏幕等）。本地快捷方式（例如 Ctrl-Space 打开我最喜欢的启动器）有效。

在升级之前没有出现任何问题。

# sudo dmidecode -s system-product-name; echo ==; lshw -c display; echo ==; xrandr --verbose
M14xR1
==
WARNING: you should run this program as super-user.
  *-display                 
       description: VGA compatible controller
       product: 2nd Generation Core Processor Family Integrated Graphics Controller
       vendor: Intel Corporation
       physical id: 2
       bus info: pci@0000:00:02.0
       version: 09
       width: 64 bits
       clock: 33MHz
       capabilities: vga_controller bus_master cap_list rom
       configuration: driver=i915 latency=0
       resources: irq:34 memory:d2400000-d27fffff memory:c0000000-cfffffff ioport:7000(size=64) memory:c0000-dffff
WARNING: output may be incomplete or inaccurate, you should run this program as super-user.
==
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
LVDS-1 connected primary 1366x768+0+0 (0x46) normal (normal left inverted right x axis y axis) 309mm x 174mm
    Identifier: 0x41
    Timestamp:  38251
    Subpixel:   horizontal rgb
    Gamma:      1.0:1.0:1.0
    Brightness: 1.0
    Clones:    
    CRTC:       0
    CRTCs:      0 1
    Transform:  1.000000 0.000000 0.000000
                0.000000 1.000000 0.000000
                0.000000 0.000000 1.000000
               filter: 
    EDID: 
        00ffffffffffff0030e4920200000000
        00150103901f11780a8e359358569029
        20505400000001010101010101010101
        010101010101121b5668500012302020
        350035ae1000001a121b566850001230
        2020350035ae1000001a000000fe0039
        4d364452803134305748320a00000000
        00004131940100000001010a202000e1
    scaling mode: Full aspect 
        supported: Full, Center, Full aspect
    link-status: Good 
        supported: Good, Bad
  1366x768 (0x46) 69.300MHz +HSync -VSync *current +preferred
        h: width  1366 start 1398 end 1430 total 1470 skew    0 clock  47.14KHz
        v: height  768 start  771 end  776 total  786           clock  59.98Hz
  1360x768 (0x47) 84.750MHz -HSync +VSync
        h: width  1360 start 1432 end 1568 total 1776 skew    0 clock  47.72KHz
        v: height  768 start  771 end  781 total  798           clock  59.80Hz
  1360x768 (0x48) 72.000MHz +HSync -VSync
        h: width  1360 start 1408 end 1440 total 1520 skew    0 clock  47.37KHz
        v: height  768 start  771 end  781 total  790           clock  59.96Hz
  1024x768 (0x49) 133.475MHz -HSync +VSync DoubleScan
        h: width  1024 start 1100 end 1212 total 1400 skew    0 clock  95.34KHz
        v: height  768 start  768 end  770 total  794           clock  60.04Hz
  1024x768 (0x4a) 65.000MHz -HSync -VSync
        h: width  1024 start 1048 end 1184 total 1344 skew    0 clock  48.36KHz
        v: height  768 start  771 end  777 total  806           clock  60.00Hz
  960x720 (0x4b) 117.000MHz -HSync +VSync DoubleScan
        h: width   960 start 1024 end 1128 total 1300 skew    0 clock  90.00KHz
        v: height  720 start  720 end  722 total  750           clock  60.00Hz
  928x696 (0x4c) 109.150MHz -HSync +VSync DoubleScan
        h: width   928 start  976 end 1088 total 1264 skew    0 clock  86.35KHz
        v: height  696 start  696 end  698 total  719           clock  60.05Hz
  896x672 (0x4d) 102.400MHz -HSync +VSync DoubleScan
        h: width   896 start  960 end 1060 total 1224 skew    0 clock  83.66KHz
        v: height  672 start  672 end  674 total  697           clock  60.01Hz
  960x600 (0x4e) 77.000MHz +HSync -VSync DoubleScan
        h: width   960 start  984 end 1000 total 1040 skew    0 clock  74.04KHz
        v: height  600 start  601 end  604 total  617           clock  60.00Hz
  960x540 (0x4f) 69.250MHz +HSync -VSync DoubleScan
        h: width   960 start  984 end 1000 total 1040 skew    0 clock  66.59KHz
        v: height  540 start  541 end  544 total  555           clock  59.99Hz
  800x600 (0x50) 81.000MHz +HSync +VSync DoubleScan
        h: width   800 start  832 end  928 total 1080 skew    0 clock  75.00KHz
        v: height  600 start  600 end  602 total  625           clock  60.00Hz
  800x600 (0x51) 40.000MHz +HSync +VSync
        h: width   800 start  840 end  968 total 1056 skew    0 clock  37.88KHz
        v: height  600 start  601 end  605 total  628           clock  60.32Hz
  800x600 (0x52) 36.000MHz +HSync +VSync
        h: width   800 start  824 end  896 total 1024 skew    0 clock  35.16KHz
        v: height  600 start  601 end  603 total  625           clock  56.25Hz
  840x525 (0x53) 73.125MHz -HSync +VSync DoubleScan
        h: width   840 start  892 end  980 total 1120 skew    0 clock  65.29KHz
        v: height  525 start  526 end  529 total  544           clock  60.01Hz
  840x525 (0x54) 59.500MHz +HSync -VSync DoubleScan
        h: width   840 start  864 end  880 total  920 skew    0 clock  64.67KHz
        v: height  525 start  526 end  529 total  540           clock  59.88Hz
  800x512 (0x55) 51.562MHz +HSync +VSync DoubleScan
        h: width   800 start  800 end  828 total  832 skew    0 clock  61.97KHz
        v: height  512 start  512 end  514 total  515           clock  60.17Hz
  700x525 (0x56) 61.000MHz +HSync +VSync DoubleScan
        h: width   700 start  744 end  820 total  940 skew    0 clock  64.89KHz
        v: height  525 start  526 end  532 total  541           clock  59.98Hz
  640x512 (0x57) 54.000MHz +HSync +VSync DoubleScan
        h: width   640 start  664 end  720 total  844 skew    0 clock  63.98KHz
        v: height  512 start  512 end  514 total  533           clock  60.02Hz
  720x450 (0x58) 53.250MHz -HSync +VSync DoubleScan
        h: width   720 start  760 end  836 total  952 skew    0 clock  55.93KHz
        v: height  450 start  451 end  454 total  467           clock  59.89Hz
  640x480 (0x59) 54.000MHz +HSync +VSync DoubleScan
        h: width   640 start  688 end  744 total  900 skew    0 clock  60.00KHz
        v: height  480 start  480 end  482 total  500           clock  60.00Hz
  640x480 (0x5a) 25.175MHz -HSync -VSync
        h: width   640 start  656 end  752 total  800 skew    0 clock  31.47KHz
        v: height  480 start  490 end  492 total  525           clock  59.94Hz
  680x384 (0x5b) 42.375MHz -HSync +VSync DoubleScan
        h: width   680 start  716 end  784 total  888 skew    0 clock  47.72KHz
        v: height  384 start  385 end  390 total  399           clock  59.80Hz
  680x384 (0x5c) 36.000MHz +HSync -VSync DoubleScan
        h: width   680 start  704 end  720 total  760 skew    0 clock  47.37KHz
        v: height  384 start  385 end  390 total  395           clock  59.96Hz
  576x432 (0x5d) 40.810MHz -HSync +VSync DoubleScan
        h: width   576 start  608 end  668 total  760 skew    0 clock  53.70KHz
        v: height  432 start  432 end  434 total  447           clock  60.06Hz
  512x384 (0x5e) 32.500MHz -HSync -VSync DoubleScan
        h: width   512 start  524 end  592 total  672 skew    0 clock  48.36KHz
        v: height  384 start  385 end  388 total  403           clock  60.00Hz
  400x300 (0x5f) 20.000MHz +HSync +VSync DoubleScan
        h: width   400 start  420 end  484 total  528 skew    0 clock  37.88KHz
        v: height  300 start  300 end  302 total  314           clock  60.32Hz
  400x300 (0x60) 18.000MHz +HSync +VSync DoubleScan
        h: width   400 start  412 end  448 total  512 skew    0 clock  35.16KHz
        v: height  300 start  300 end  301 total  312           clock  56.34Hz
  320x240 (0x61) 12.587MHz -HSync -VSync DoubleScan
        h: width   320 start  328 end  376 total  400 skew    0 clock  31.47KHz
        v: height  240 start  245 end  246 total  262           clock  60.05Hz
VGA-1 disconnected (normal left inverted right x axis y axis)
    Identifier: 0x42
    Timestamp:  38251
    Subpixel:   unknown
    Clones:    
    CRTCs:      0 1
    Transform:  1.000000 0.000000 0.000000
                0.000000 1.000000 0.000000
                0.000000 0.000000 1.000000
               filter: 
    link-status: Good 
        supported: Good, Bad
HDMI-1 disconnected (normal left inverted right x axis y axis)
    Identifier: 0x43
    Timestamp:  38251
    Subpixel:   unknown
    Clones:    
    CRTCs:      0 1
    Transform:  1.000000 0.000000 0.000000
                0.000000 1.000000 0.000000
                0.000000 0.000000 1.000000
               filter: 
    aspect ratio: Automatic 
        supported: Automatic, 4:3, 16:9
    Broadcast RGB: Automatic 
        supported: Automatic, Full, Limited 16:235
    audio: auto 
        supported: force-dvi, off, auto, on
    link-status: Good 
        supported: Good, Bad
DP-1 disconnected (normal left inverted right x axis y axis)
    Identifier: 0x44
    Timestamp:  38251
    Subpixel:   unknown
    Clones:    
    CRTCs:      0 1
    Transform:  1.000000 0.000000 0.000000
                0.000000 1.000000 0.000000
                0.000000 0.000000 1.000000
               filter: 
    Broadcast RGB: Automatic 
        supported: Automatic, Full, Limited 16:235
    audio: auto 
        supported: force-dvi, off, auto, on
    link-status: Good 
        supported: Good, Bad

jasmines

Asked: 2017-10-24 00:16:42 +0800 CST

Synapse 在 17.10 与 Wayland 一起崩溃

0

Synapse 根本不会启动：

synapse 
[INFO 10:15:46.815109] [synapse-main:266] Starting up...
[INFO 10:15:46.922925] [synapse-main:208] Binding activation to <Control>space
Segmentation Fault

使用 Xorg 和 Unity 的 Ubuntu 一切正常。

jasmines

Asked: 2017-10-21 02:57:14 +0800 CST

登录 Wayland 后 Ubuntu 17.10 冻结

5

刚刚从 17.04 升级。Unity 会话有效。xorg 上的 Ubuntu (gnome-shell) 也可以。如果我选择默认会话（Wayland 上的 Ubuntu），输入密码后，屏幕变为紫色，鼠标光标冻结在屏幕中央，我只能单击电源按钮关闭电源。

不知道这是否有帮助，但是在Unity会话中登录后，会出现一个对话框错误，说

所需的虚拟大小不适合可用大小：请求=（1,1），最小=（320,200），最大=（8192,8192）

显然它没有出现在 17.04 上。

我该如何调查？

jasmines

Asked: 2016-11-24 00:57:05 +0800 CST

ffmpeg56 和 ffmpeg54 软件包是否已停产？

8

似乎以下软件包未包含在官方 yakkety 存储库中，即使它们在 xenial 中也是如此。

libavcodec-ffmpeg-extra56
libavformat-ffmpeg56
libavutil-ffmpeg54

它们是无用/已停产还是我应该认为以下是有效的替代品？

libavcodec57
libavformat57
libavcodec-extra57
libavcodec-extra
libavutil55

jasmines

Asked: 2016-05-14 07:30:59 +0800 CST

自 ubuntu 16.04 以来 sshpass 中断

2

由于我升级到 16.04，以下命令失败：

sshpass -p password ssh user@host

出现错误：

Could not create directory '/home/mylocaluser/.ssh'.

（~/.ssh文件夹已经存在）。

以下命令：

ssh user@host

仍然有效。

在升级之前，第一个命令可以完美运行。

编辑：

发现.ssh我的主文件夹中的那个目录只是一个符号链接/home/mylocaluser/Dropbox/Mockup/.ssh（并且那个不存在）！！！我删除了符号链接，现在命令 sshpass 仍然失败，没有错误。

jasmines

Asked: 2016-04-29 00:24:10 +0800 CST

升级到 16.04 后 gedit 不会保存并退出

1

重现步骤：

在gedit中打开一个文本文件
修改一些东西
关闭文件，程序会要求保存
说是，程序不会退出，只是保存文件

直到15.10，这种行为都是正确的。

jasmines

Asked: 2016-04-28 01:06:06 +0800 CST

自 16.04 以来不再有引导日志记录？

27

我注意到我的/var/log/boot.log文件的日期为 2016-04-22，上次我在 15.10 中启动。boot.logXenial文件在哪里？

jasmines

Asked: 2016-03-15 03:06:38 +0800 CST

VLC 强制所有视频大小相同 - 无法调整它们的大小

4

我尝试使用 vlc 播放的所有视频都固定为相同大小，我无法调整它们的大小以强制放大或缩小以适应窗口。

试图清除配置文件夹，卸载并重新安装。与其他视频播放器一起，视频可以按预期完美运行。

vlc版 2.2.1+git20160310+r58688+34+15~ubuntu15.10.1

内核版本 4.2.0-34-generic #39-Ubuntu SMP Thu Mar 10 22:13:01 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

输出lshw -c video：

*-display UNCLAIMED     
       description: VGA compatible controller
       product: GF106M [GeForce GT 555M]
       vendor: NVIDIA Corporation
       physical id: 0
       bus info: pci@0000:01:00.0
       version: a1
       width: 64 bits
       clock: 33MHz
       capabilities: vga_controller bus_master cap_list
       configuration: latency=0
       resources: memory:d0000000-d1ffffff memory:a0000000-afffffff memory:b0000000-b3ffffff ioport:6000(size=128) memory:d2000000-d207ffff
  *-display
       description: VGA compatible controller
       product: 2nd Generation Core Processor Family Integrated Graphics Controller
       vendor: Intel Corporation
       physical id: 2
       bus info: pci@0000:00:02.0
       version: 09
       width: 64 bits
       clock: 33MHz
       capabilities: vga_controller bus_master cap_list rom
       configuration: driver=i915 latency=0
       resources: irq:35 memory:d2400000-d27fffff memory:c0000000-cfffffff ioport:7000(size=64)

输出modinfo i915：

filename:       /lib/modules/4.2.0-34-generic/updates/dkms/i915.ko
license:        GPL and additional rights
description:    Intel Graphics
author:         Intel Corporation
author:         Tungsten Graphics, Inc.
firmware:       i915/skl_dmc_ver1.bin
srcversion:     D8F27CD62AA99DAC898A0F1
alias:          pci:v00008086d00005A84sv*sd*bc03sc*i*
alias:          pci:v00008086d00001A84sv*sd*bc03sc*i*
alias:          pci:v00008086d00000A84sv*sd*bc03sc*i*
alias:          pci:v00008086d0000192Asv*sd*bc03sc*i*
alias:          pci:v00008086d0000192Bsv*sd*bc03sc*i*
alias:          pci:v00008086d00001926sv*sd*bc03sc*i*
alias:          pci:v00008086d0000191Dsv*sd*bc03sc*i*
alias:          pci:v00008086d0000191Asv*sd*bc03sc*i*
alias:          pci:v00008086d0000191Bsv*sd*bc03sc*i*
alias:          pci:v00008086d00001912sv*sd*bc03sc*i*
alias:          pci:v00008086d0000191Esv*sd*bc03sc*i*
alias:          pci:v00008086d00001921sv*sd*bc03sc*i*
alias:          pci:v00008086d00001916sv*sd*bc03sc*i*
alias:          pci:v00008086d0000190Asv*sd*bc03sc*i*
alias:          pci:v00008086d0000190Bsv*sd*bc03sc*i*
alias:          pci:v00008086d00001902sv*sd*bc03sc*i*
alias:          pci:v00008086d0000190Esv*sd*bc03sc*i*
alias:          pci:v00008086d00001906sv*sd*bc03sc*i*
alias:          pci:v00008086d000022B3sv*sd*bc03sc*i*
alias:          pci:v00008086d000022B2sv*sd*bc03sc*i*
alias:          pci:v00008086d000022B1sv*sd*bc03sc*i*
alias:          pci:v00008086d000022B0sv*sd*bc03sc*i*
alias:          pci:v00008086d0000162Dsv*sd*bc03sc*i*
alias:          pci:v00008086d0000162Asv*sd*bc03sc*i*
alias:          pci:v00008086d0000162Esv*sd*bc03sc*i*
alias:          pci:v00008086d0000162Bsv*sd*bc03sc*i*
alias:          pci:v00008086d00001626sv*sd*bc03sc*i*
alias:          pci:v00008086d00001622sv*sd*bc03sc*i*
alias:          pci:v00008086d0000161Dsv*sd*bc03sc*i*
alias:          pci:v00008086d0000161Asv*sd*bc03sc*i*
alias:          pci:v00008086d0000160Dsv*sd*bc03sc*i*
alias:          pci:v00008086d0000160Asv*sd*bc03sc*i*
alias:          pci:v00008086d0000161Esv*sd*bc03sc*i*
alias:          pci:v00008086d0000161Bsv*sd*bc03sc*i*
alias:          pci:v00008086d00001616sv*sd*bc03sc*i*
alias:          pci:v00008086d00001612sv*sd*bc03sc*i*
alias:          pci:v00008086d0000160Esv*sd*bc03sc*i*
alias:          pci:v00008086d0000160Bsv*sd*bc03sc*i*
alias:          pci:v00008086d00001606sv*sd*bc03sc*i*
alias:          pci:v00008086d00001602sv*sd*bc03sc*i*
alias:          pci:v00008086d00000155sv*sd*bc03sc*i*
alias:          pci:v00008086d00000157sv*sd*bc03sc*i*
alias:          pci:v00008086d00000F33sv*sd*bc03sc*i*
alias:          pci:v00008086d00000F32sv*sd*bc03sc*i*
alias:          pci:v00008086d00000F31sv*sd*bc03sc*i*
alias:          pci:v00008086d00000F30sv*sd*bc03sc*i*
alias:          pci:v00008086d00000D26sv*sd*bc03sc*i*
alias:          pci:v00008086d00000D16sv*sd*bc03sc*i*
alias:          pci:v00008086d00000D06sv*sd*bc03sc*i*
alias:          pci:v00008086d00000A2Esv*sd*bc03sc*i*
alias:          pci:v00008086d00000A1Esv*sd*bc03sc*i*
alias:          pci:v00008086d00000A0Esv*sd*bc03sc*i*
alias:          pci:v00008086d00000A26sv*sd*bc03sc*i*
alias:          pci:v00008086d00000A16sv*sd*bc03sc*i*
alias:          pci:v00008086d00000A06sv*sd*bc03sc*i*
alias:          pci:v00008086d00000C26sv*sd*bc03sc*i*
alias:          pci:v00008086d00000C16sv*sd*bc03sc*i*
alias:          pci:v00008086d00000C06sv*sd*bc03sc*i*
alias:          pci:v00008086d00000426sv*sd*bc03sc*i*
alias:          pci:v00008086d00000416sv*sd*bc03sc*i*
alias:          pci:v00008086d00000406sv*sd*bc03sc*i*
alias:          pci:v00008086d00000D2Esv*sd*bc03sc*i*
alias:          pci:v00008086d00000D1Esv*sd*bc03sc*i*
alias:          pci:v00008086d00000D0Esv*sd*bc03sc*i*
alias:          pci:v00008086d00000D2Bsv*sd*bc03sc*i*
alias:          pci:v00008086d00000D1Bsv*sd*bc03sc*i*
alias:          pci:v00008086d00000D0Bsv*sd*bc03sc*i*
alias:          pci:v00008086d00000D2Asv*sd*bc03sc*i*
alias:          pci:v00008086d00000D1Asv*sd*bc03sc*i*
alias:          pci:v00008086d00000D0Asv*sd*bc03sc*i*
alias:          pci:v00008086d00000D22sv*sd*bc03sc*i*
alias:          pci:v00008086d00000D12sv*sd*bc03sc*i*
alias:          pci:v00008086d00000D02sv*sd*bc03sc*i*
alias:          pci:v00008086d00000A2Bsv*sd*bc03sc*i*
alias:          pci:v00008086d00000A1Bsv*sd*bc03sc*i*
alias:          pci:v00008086d00000A0Bsv*sd*bc03sc*i*
alias:          pci:v00008086d00000A2Asv*sd*bc03sc*i*
alias:          pci:v00008086d00000A1Asv*sd*bc03sc*i*
alias:          pci:v00008086d00000A0Asv*sd*bc03sc*i*
alias:          pci:v00008086d00000A22sv*sd*bc03sc*i*
alias:          pci:v00008086d00000A12sv*sd*bc03sc*i*
alias:          pci:v00008086d00000A02sv*sd*bc03sc*i*
alias:          pci:v00008086d00000C2Esv*sd*bc03sc*i*
alias:          pci:v00008086d00000C1Esv*sd*bc03sc*i*
alias:          pci:v00008086d00000C0Esv*sd*bc03sc*i*
alias:          pci:v00008086d00000C2Bsv*sd*bc03sc*i*
alias:          pci:v00008086d00000C1Bsv*sd*bc03sc*i*
alias:          pci:v00008086d00000C0Bsv*sd*bc03sc*i*
alias:          pci:v00008086d00000C2Asv*sd*bc03sc*i*
alias:          pci:v00008086d00000C1Asv*sd*bc03sc*i*
alias:          pci:v00008086d00000C0Asv*sd*bc03sc*i*
alias:          pci:v00008086d00000C22sv*sd*bc03sc*i*
alias:          pci:v00008086d00000C12sv*sd*bc03sc*i*
alias:          pci:v00008086d00000C02sv*sd*bc03sc*i*
alias:          pci:v00008086d0000042Esv*sd*bc03sc*i*
alias:          pci:v00008086d0000041Esv*sd*bc03sc*i*
alias:          pci:v00008086d0000040Esv*sd*bc03sc*i*
alias:          pci:v00008086d0000042Bsv*sd*bc03sc*i*
alias:          pci:v00008086d0000041Bsv*sd*bc03sc*i*
alias:          pci:v00008086d0000040Bsv*sd*bc03sc*i*
alias:          pci:v00008086d0000042Asv*sd*bc03sc*i*
alias:          pci:v00008086d0000041Asv*sd*bc03sc*i*
alias:          pci:v00008086d0000040Asv*sd*bc03sc*i*
alias:          pci:v00008086d00000422sv*sd*bc03sc*i*
alias:          pci:v00008086d00000412sv*sd*bc03sc*i*
alias:          pci:v00008086d00000402sv*sd*bc03sc*i*
alias:          pci:v00008086d0000016Asv*sd*bc03sc*i*
alias:          pci:v00008086d0000015Asv*sd*bc03sc*i*
alias:          pci:v00008086d00000162sv*sd*bc03sc*i*
alias:          pci:v00008086d00000152sv*sd*bc03sc*i*
alias:          pci:v00008086d00000166sv*sd*bc03sc*i*
alias:          pci:v00008086d00000156sv*sd*bc03sc*i*
alias:          pci:v00008086d0000016Asv0000152Dsd00008990bc03sc*i*
alias:          pci:v00008086d00000126sv*sd*bc03sc*i*
alias:          pci:v00008086d00000116sv*sd*bc03sc*i*
alias:          pci:v00008086d00000106sv*sd*bc03sc*i*
alias:          pci:v00008086d0000010Asv*sd*bc03sc*i*
alias:          pci:v00008086d00000122sv*sd*bc03sc*i*
alias:          pci:v00008086d00000112sv*sd*bc03sc*i*
alias:          pci:v00008086d00000102sv*sd*bc03sc*i*
alias:          pci:v00008086d00000046sv*sd*bc03sc*i*
alias:          pci:v00008086d00000042sv*sd*bc03sc*i*
alias:          pci:v00008086d0000A011sv*sd*bc03sc*i*
alias:          pci:v00008086d0000A001sv*sd*bc03sc*i*
alias:          pci:v00008086d00002E92sv*sd*bc03sc*i*
alias:          pci:v00008086d00002E42sv*sd*bc03sc*i*
alias:          pci:v00008086d00002E32sv*sd*bc03sc*i*
alias:          pci:v00008086d00002E22sv*sd*bc03sc*i*
alias:          pci:v00008086d00002E12sv*sd*bc03sc*i*
alias:          pci:v00008086d00002E02sv*sd*bc03sc*i*
alias:          pci:v00008086d00002A42sv*sd*bc03sc*i*
alias:          pci:v00008086d00002A12sv*sd*bc03sc*i*
alias:          pci:v00008086d00002A02sv*sd*bc03sc*i*
alias:          pci:v00008086d000029D2sv*sd*bc03sc*i*
alias:          pci:v00008086d000029C2sv*sd*bc03sc*i*
alias:          pci:v00008086d000029B2sv*sd*bc03sc*i*
alias:          pci:v00008086d000029A2sv*sd*bc03sc*i*
alias:          pci:v00008086d00002992sv*sd*bc03sc*i*
alias:          pci:v00008086d00002982sv*sd*bc03sc*i*
alias:          pci:v00008086d00002972sv*sd*bc03sc*i*
alias:          pci:v00008086d000027AEsv*sd*bc03sc*i*
alias:          pci:v00008086d000027A2sv*sd*bc03sc*i*
alias:          pci:v00008086d00002772sv*sd*bc03sc*i*
alias:          pci:v00008086d00002592sv*sd*bc03sc*i*
alias:          pci:v00008086d0000258Asv*sd*bc03sc*i*
alias:          pci:v00008086d00002582sv*sd*bc03sc*i*
alias:          pci:v00008086d00002572sv*sd*bc03sc*i*
alias:          pci:v00008086d0000358Esv*sd*bc03sc*i*
alias:          pci:v00008086d00003582sv*sd*bc03sc*i*
alias:          pci:v00008086d00002562sv*sd*bc03sc*i*
alias:          pci:v00008086d00003577sv*sd*bc03sc*i*
depends:        drm_kms_helper,drm,video,i2c-algo-bit
vermagic:       4.2.0-34-generic SMP mod_unload modversions 
parm:           modeset:Use kernel modesetting [KMS] (0=disable, 1=on, -1=force vga console preference [default]) (int)
parm:           panel_ignore_lid:Override lid status (0=autodetect, 1=autodetect disabled [default], -1=force lid closed, -2=force lid open) (int)
parm:           semaphores:Use semaphores for inter-ring sync (default: -1 (use per-chip defaults)) (int)
parm:           enable_rc6:Enable power-saving render C-state 6. Different stages can be selected via bitmask values (0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. default: -1 (use per-chip default) (int)
parm:           enable_dc:Enable power-saving display C-states. (-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6) (int)
parm:           enable_fbc:Enable frame buffer compression for power savings (default: -1 (use per-chip default)) (int)
parm:           lvds_channel_mode:Specify LVDS channel mode (0=probe BIOS [default], 1=single-channel, 2=dual-channel) (int)
parm:           lvds_use_ssc:Use Spread Spectrum Clock with panels [LVDS/eDP] (default: auto from VBT) (int)
parm:           vbt_sdvo_panel_type:Override/Ignore selection of SDVO panel mode in the VBT (-2=ignore, -1=auto [default], index in VBT BIOS table) (int)
parm:           reset:Attempt GPU resets (default: true) (bool)
parm:           enable_hangcheck:Periodically check GPU activity for detecting hangs. WARNING: Disabling this can cause system wide hangs. (default: true) (bool)
parm:           enable_ppgtt:Override PPGTT usage. (-1=auto [default], 0=disabled, 1=aliasing, 2=full) (int)
parm:           enable_execlists:Override execlists usage. (-1=auto [default], 0=disabled, 1=enabled) (int)
parm:           enable_psr:Enable PSR (default: false) (int)
parm:           preliminary_hw_support:Enable preliminary hardware support. (int)
parm:           disable_power_well:Disable the power well when possible (default: true) (int)
parm:           enable_ips:Enable IPS (default: true) (int)
parm:           fastboot:Try to skip unnecessary mode sets at boot time (default: false) (bool)
parm:           prefault_disable:Disable page prefaulting for pread/pwrite/reloc (default:false). For developers only. (bool)
parm:           load_detect_test:Force-enable the VGA load detect code for testing (default:false). For developers only. (bool)
parm:           invert_brightness:Invert backlight brightness (-1 force normal, 0 machine defaults, 1 force inversion), please report PCI device ID, subsystem vendor and subsystem device ID to [email protected], if your machine needs it. It will then be included in an upcoming module version. (int)
parm:           disable_display:Disable display (default: false) (bool)
parm:           disable_vtd_wa:Disable all VT-d workarounds (default: false) (bool)
parm:           enable_cmd_parser:Enable command parsing (1=enabled [default], 0=disabled) (int)
parm:           use_mmio_flip:use MMIO flips (-1=never, 0=driver discretion [default], 1=always) (int)
parm:           mmio_debug:Enable the MMIO debug code for the first N failures (default: off). This may negatively affect performance. (int)
parm:           verbose_state_checks:Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions. (bool)
parm:           edp_vswing:Ignore/Override vswing pre-emph table selection from VBT (0=use value from vbt [default], 1=low power swing(200mV),2=default swing(400mV)) (int)
parm:           enable_guc_submission:Enable GuC submission (default:false) (bool)
parm:           guc_log_level:GuC firmware logging level (-1:disabled (default), 0-3:enabled) (int)

输出lspci -nnk | grep -i vga -A3 | grep 'in use'：

Kernel driver in use: i915

jasmines

Asked: 2015-10-27 13:13:58 +0800 CST

升级到 Ubuntu 15.10 后 mysql 工作台坏了

4

mysql-workbench启动后很快崩溃并出现以下错误：

/usr/local/bin/mysql-workbench-bin: symbol lookup error: /usr/local/bin/mysql-workbench-bin: undefined symbol: _ZN4Glib7ustringC1ERKSs

它发生在我升级到 Ubuntu 15.10 之后。

mysql-workbench:amd64/wily 6.3.4+dfsg-1build3 uptodate
mysql-workbench:i386 not installed

输出ldd /usr/local/bin/mysql-workbench-bin：

    linux-vdso.so.1 =>  (0x00007ffdc8937000)
    libmforms.so.6.2.3 => /usr/local/lib/mysql-workbench/libmforms.so.6.2.3 (0x00007f2cf77c7000)
    liblinux_utilities.so.6.2.3 => /usr/local/lib/mysql-workbench/liblinux_utilities.so.6.2.3 (0x00007f2cf7467000)
    libsqlide.so.6.2.3 => /usr/local/lib/mysql-workbench/libsqlide.so.6.2.3 (0x00007f2cf70fb000)
    libwbprivate.so.6.2.3 => /usr/local/lib/mysql-workbench/libwbprivate.so.6.2.3 (0x00007f2cf5756000)
    libwbpublic.so.6.2.3 => /usr/local/lib/mysql-workbench/libwbpublic.so.6.2.3 (0x00007f2cf4250000)
    libwbbase.so.6.2.3 => /usr/local/lib/mysql-workbench/libwbbase.so.6.2.3 (0x00007f2cf3fb5000)
    libgrt.so.6.2.3 => /usr/local/lib/mysql-workbench/libgrt.so.6.2.3 (0x00007f2cf3af4000)
    libcdbc.so.6.2.3 => /usr/local/lib/mysql-workbench/libcdbc.so.6.2.3 (0x00007f2cf388b000)
    libmdcanvasgtk.so.6.2.3 => /usr/local/lib/mysql-workbench/libmdcanvasgtk.so.6.2.3 (0x00007f2cf3602000)
    libgtk-x11-2.0.so.0 => /usr/lib/x86_64-linux-gnu/libgtk-x11-2.0.so.0 (0x00007f2cf2fb6000)
    libgdk-x11-2.0.so.0 => /usr/lib/x86_64-linux-gnu/libgdk-x11-2.0.so.0 (0x00007f2cf2d01000)
    libcairo.so.2 => /usr/lib/x86_64-linux-gnu/libcairo.so.2 (0x00007f2cf29ee000)
    libgmodule-2.0.so.0 => /usr/lib/x86_64-linux-gnu/libgmodule-2.0.so.0 (0x00007f2cf27ea000)
    libgobject-2.0.so.0 => /usr/lib/x86_64-linux-gnu/libgobject-2.0.so.0 (0x00007f2cf2597000)
    libglib-2.0.so.0 => /lib/x86_64-linux-gnu/libglib-2.0.so.0 (0x00007f2cf2288000)
    libgtkmm-2.4.so.1 => /usr/lib/x86_64-linux-gnu/libgtkmm-2.4.so.1 (0x00007f2cf1c65000)
    libgdkmm-2.4.so.1 => /usr/lib/x86_64-linux-gnu/libgdkmm-2.4.so.1 (0x00007f2cf1a18000)
    libatkmm-1.6.so.1 => /usr/lib/x86_64-linux-gnu/libatkmm-1.6.so.1 (0x00007f2cf17d1000)
    libglibmm-2.4.so.1 => /usr/lib/x86_64-linux-gnu/libglibmm-2.4.so.1 (0x00007f2cf155b000)
    libsigc-2.0.so.0 => /usr/lib/x86_64-linux-gnu/libsigc-2.0.so.0 (0x00007f2cf1355000)
    libpython2.7.so.1.0 => /usr/lib/x86_64-linux-gnu/libpython2.7.so.1.0 (0x00007f2cf0ddb000)
    libX11.so.6 => /usr/lib/x86_64-linux-gnu/libX11.so.6 (0x00007f2cf0aa1000)
    libstdc++.so.6 => /usr/lib/x86_64-linux-gnu/libstdc++.so.6 (0x00007f2cf071f000)
    libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007f2cf0417000)
    libgcc_s.so.1 => /lib/x86_64-linux-gnu/libgcc_s.so.1 (0x00007f2cf0200000)
    libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f2cefe36000)
    libpango-1.0.so.0 => /usr/lib/x86_64-linux-gnu/libpango-1.0.so.0 (0x00007f2cefbe8000)
    libpangomm-1.4.so.1 => /usr/lib/x86_64-linux-gnu/libpangomm-1.4.so.1 (0x00007f2cef9bd000)
    libcairomm-1.0.so.1 => /usr/lib/x86_64-linux-gnu/libcairomm-1.0.so.1 (0x00007f2cef79a000)
    libgnome-keyring.so.0 => /usr/lib/x86_64-linux-gnu/libgnome-keyring.so.0 (0x00007f2cef574000)
    libtinyxml.so.2.6.2 => /usr/lib/x86_64-linux-gnu/libtinyxml.so.2.6.2 (0x00007f2cef35e000)
    libgdk_pixbuf-2.0.so.0 => /usr/lib/x86_64-linux-gnu/libgdk_pixbuf-2.0.so.0 (0x00007f2cef13c000)
    libmdcanvas.so.6.2.3 => /usr/local/lib/mysql-workbench/libmdcanvas.so.6.2.3 (0x00007f2ceec66000)
    libzip.so.2 => /usr/lib/x86_64-linux-gnu/libzip.so.2 (0x00007f2ceea55000)
    libpcre.so.3 => /lib/x86_64-linux-gnu/libpcre.so.3 (0x00007f2cee7e8000)
    libpcrecpp.so.0 => /usr/lib/x86_64-linux-gnu/libpcrecpp.so.0 (0x00007f2cee5de000)
    libxml2.so.2 => /usr/lib/x86_64-linux-gnu/libxml2.so.2 (0x00007f2cee226000)
    libvsqlitepp.so.3 => /usr/lib/x86_64-linux-gnu/libvsqlitepp.so.3 (0x00007f2cee002000)
    libwbscintilla.so => /usr/local/lib/mysql-workbench/libwbscintilla.so (0x00007f2cedb98000)
    libmysqlparser.so.6.2.3 => /usr/local/lib/mysql-workbench/libmysqlparser.so.6.2.3 (0x00007f2ceb14d000)
    libctemplate.so.2 => /usr/lib/libctemplate.so.2 (0x00007f2ceaeed000)
    libGL.so.1 => /usr/lib/x86_64-linux-gnu/mesa/libGL.so.1 (0x00007f2ceac55000)
    libgdal.so.1 => /usr/lib/libgdal.so.1 (0x00007f2ce9e27000)
    libuuid.so.1 => /lib/x86_64-linux-gnu/libuuid.so.1 (0x00007f2ce9c22000)
    libmysqlcppconn.so.7 => /usr/lib/libmysqlcppconn.so.7 (0x00007f2ce9905000)
    libpangocairo-1.0.so.0 => /usr/lib/x86_64-linux-gnu/libpangocairo-1.0.so.0 (0x00007f2ce96f8000)
    libXfixes.so.3 => /usr/lib/x86_64-linux-gnu/libXfixes.so.3 (0x00007f2ce94f2000)
    libatk-1.0.so.0 => /usr/lib/x86_64-linux-gnu/libatk-1.0.so.0 (0x00007f2ce92cd000)
    libgio-2.0.so.0 => /usr/lib/x86_64-linux-gnu/libgio-2.0.so.0 (0x00007f2ce8f4c000)
    libpangoft2-1.0.so.0 => /usr/lib/x86_64-linux-gnu/libpangoft2-1.0.so.0 (0x00007f2ce8d36000)
    libfontconfig.so.1 => /usr/lib/x86_64-linux-gnu/libfontconfig.so.1 (0x00007f2ce8af8000)
    libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f2ce88da000)
    libXrender.so.1 => /usr/lib/x86_64-linux-gnu/libXrender.so.1 (0x00007f2ce86d0000)
    libXinerama.so.1 => /usr/lib/x86_64-linux-gnu/libXinerama.so.1 (0x00007f2ce84cd000)
    libXi.so.6 => /usr/lib/x86_64-linux-gnu/libXi.so.6 (0x00007f2ce82bd000)
    libXrandr.so.2 => /usr/lib/x86_64-linux-gnu/libXrandr.so.2 (0x00007f2ce80b2000)
    libXcursor.so.1 => /usr/lib/x86_64-linux-gnu/libXcursor.so.1 (0x00007f2ce7ea8000)
    libXcomposite.so.1 => /usr/lib/x86_64-linux-gnu/libXcomposite.so.1 (0x00007f2ce7ca5000)
    libXdamage.so.1 => /usr/lib/x86_64-linux-gnu/libXdamage.so.1 (0x00007f2ce7aa2000)
    libXext.so.6 => /usr/lib/x86_64-linux-gnu/libXext.so.6 (0x00007f2ce7890000)
    libpixman-1.so.0 => /usr/lib/x86_64-linux-gnu/libpixman-1.so.0 (0x00007f2ce75e3000)
    libfreetype.so.6 => /usr/lib/x86_64-linux-gnu/libfreetype.so.6 (0x00007f2ce733d000)
    libpng12.so.0 => /lib/x86_64-linux-gnu/libpng12.so.0 (0x00007f2ce7117000)
    libxcb-shm.so.0 => /usr/lib/x86_64-linux-gnu/libxcb-shm.so.0 (0x00007f2ce6f13000)
    libxcb-render.so.0 => /usr/lib/x86_64-linux-gnu/libxcb-render.so.0 (0x00007f2ce6d09000)
    libxcb.so.1 => /usr/lib/x86_64-linux-gnu/libxcb.so.1 (0x00007f2ce6ae8000)
    libz.so.1 => /lib/x86_64-linux-gnu/libz.so.1 (0x00007f2ce68ce000)
    librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007f2ce66c6000)
    libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f2ce64c2000)
    libffi.so.6 => /usr/lib/x86_64-linux-gnu/libffi.so.6 (0x00007f2ce62ba000)
    libgiomm-2.4.so.1 => /usr/lib/x86_64-linux-gnu/libgiomm-2.4.so.1 (0x00007f2ce5f21000)
    libutil.so.1 => /lib/x86_64-linux-gnu/libutil.so.1 (0x00007f2ce5d1e000)
    /lib64/ld-linux-x86-64.so.2 (0x00007f2cf8160000)
    libthai.so.0 => /usr/lib/x86_64-linux-gnu/libthai.so.0 (0x00007f2ce5b15000)
    libdbus-1.so.3 => /lib/x86_64-linux-gnu/libdbus-1.so.3 (0x00007f2ce58c9000)
    libgcrypt.so.20 => /lib/x86_64-linux-gnu/libgcrypt.so.20 (0x00007f2ce55e7000)
    libicuuc.so.55 => /usr/lib/x86_64-linux-gnu/libicuuc.so.55 (0x00007f2ce5253000)
    libsqlite3.so.0 => /usr/lib/x86_64-linux-gnu/libsqlite3.so.0 (0x00007f2ce4f86000)
    libantlr3c_wb.so => /usr/local/lib/mysql-workbench/libantlr3c_wb.so (0x00007f2ce4d69000)
    libexpat.so.1 => /lib/x86_64-linux-gnu/libexpat.so.1 (0x00007f2ce4b40000)
    libglapi.so.0 => /usr/lib/x86_64-linux-gnu/libglapi.so.0 (0x00007f2ce4912000)
    libX11-xcb.so.1 => /usr/lib/x86_64-linux-gnu/libX11-xcb.so.1 (0x00007f2ce4710000)
    libxcb-glx.so.0 => /usr/lib/x86_64-linux-gnu/libxcb-glx.so.0 (0x00007f2ce44f7000)
    libxcb-dri2.so.0 => /usr/lib/x86_64-linux-gnu/libxcb-dri2.so.0 (0x00007f2ce42f2000)
    libxcb-dri3.so.0 => /usr/lib/x86_64-linux-gnu/libxcb-dri3.so.0 (0x00007f2ce40ef000)
    libxcb-present.so.0 => /usr/lib/x86_64-linux-gnu/libxcb-present.so.0 (0x00007f2ce3eec000)
    libxcb-sync.so.1 => /usr/lib/x86_64-linux-gnu/libxcb-sync.so.1 (0x00007f2ce3ce5000)
    libxshmfence.so.1 => /usr/lib/x86_64-linux-gnu/libxshmfence.so.1 (0x00007f2ce3ae2000)
    libXxf86vm.so.1 => /usr/lib/x86_64-linux-gnu/libXxf86vm.so.1 (0x00007f2ce38dc000)
    libdrm.so.2 => /usr/lib/x86_64-linux-gnu/libdrm.so.2 (0x00007f2ce36cd000)
    libarmadillo.so.5 => /usr/lib/libarmadillo.so.5 (0x00007f2ce34c6000)
    libproj.so.9 => /usr/lib/x86_64-linux-gnu/libproj.so.9 (0x00007f2ce326c000)
    libpoppler.so.52 => /usr/lib/x86_64-linux-gnu/libpoppler.so.52 (0x00007f2ce2df3000)
    libfreexl.so.1 => /usr/lib/x86_64-linux-gnu/libfreexl.so.1 (0x00007f2ce2bea000)
    libgeos_c.so.1 => /usr/lib/x86_64-linux-gnu/libgeos_c.so.1 (0x00007f2ce29bc000)
    libwebp.so.5 => /usr/lib/x86_64-linux-gnu/libwebp.so.5 (0x00007f2ce275f000)
    libepsilon.so.1 => /usr/lib/x86_64-linux-gnu/libepsilon.so.1 (0x00007f2ce2546000)
    libodbc.so.2 => /usr/lib/x86_64-linux-gnu/libodbc.so.2 (0x00007f2ce22df000)
    libodbcinst.so.2 => /usr/lib/x86_64-linux-gnu/libodbcinst.so.2 (0x00007f2ce20cd000)
    libkmlbase.so.1 => /usr/lib/x86_64-linux-gnu/libkmlbase.so.1 (0x00007f2ce1eb3000)
    libkmldom.so.1 => /usr/lib/x86_64-linux-gnu/libkmldom.so.1 (0x00007f2ce1bfb000)
    libkmlengine.so.1 => /usr/lib/x86_64-linux-gnu/libkmlengine.so.1 (0x00007f2ce19c2000)
    libxerces-c-3.1.so => /usr/lib/x86_64-linux-gnu/libxerces-c-3.1.so (0x00007f2ce1421000)
    libopenjp2.so.7 => /usr/lib/x86_64-linux-gnu/libopenjp2.so.7 (0x00007f2ce11e9000)
    libjasper.so.1 => /usr/lib/x86_64-linux-gnu/libjasper.so.1 (0x00007f2ce0f92000)
    libnetcdf.so.7 => /usr/lib/x86_64-linux-gnu/libnetcdf.so.7 (0x00007f2cddc43000)
    libhdf5_serial.so.10 => /usr/lib/x86_64-linux-gnu/libhdf5_serial.so.10 (0x00007f2cdd78d000)
    libmfhdfalt.so.0 => /usr/lib/libmfhdfalt.so.0 (0x00007f2cdd568000)
    libdfalt.so.0 => /usr/lib/libdfalt.so.0 (0x00007f2cdd2c2000)
    libogdi.so.3.2 => /usr/lib/libogdi.so.3.2 (0x00007f2cdd0a1000)
    libgif.so.4 => /usr/lib/x86_64-linux-gnu/libgif.so.4 (0x00007f2cdce98000)
    libjpeg.so.8 => /usr/lib/x86_64-linux-gnu/libjpeg.so.8 (0x00007f2cdcc43000)
    libpq.so.5 => /usr/lib/x86_64-linux-gnu/libpq.so.5 (0x00007f2cdca14000)
    liblzma.so.5 => /lib/x86_64-linux-gnu/liblzma.so.5 (0x00007f2cdc7f2000)
    libdapclient.so.6 => /usr/lib/x86_64-linux-gnu/libdapclient.so.6 (0x00007f2cdc574000)
    libdap.so.17 => /usr/lib/x86_64-linux-gnu/libdap.so.17 (0x00007f2cdc13d000)
    libspatialite.so.7 => /usr/lib/x86_64-linux-gnu/libspatialite.so.7 (0x00007f2cdb9ac000)
    libcurl-gnutls.so.4 => /usr/lib/x86_64-linux-gnu/libcurl-gnutls.so.4 (0x00007f2cdb740000)
    libmysqlclient.so.18 => /usr/lib/x86_64-linux-gnu/libmysqlclient.so.18 (0x00007f2cdb180000)
    libselinux.so.1 => /lib/x86_64-linux-gnu/libselinux.so.1 (0x00007f2cdaf5c000)
    libresolv.so.2 => /lib/x86_64-linux-gnu/libresolv.so.2 (0x00007f2cdad40000)
    libharfbuzz.so.0 => /usr/lib/x86_64-linux-gnu/libharfbuzz.so.0 (0x00007f2cdaae2000)
    libXau.so.6 => /usr/lib/x86_64-linux-gnu/libXau.so.6 (0x00007f2cda8de000)
    libXdmcp.so.6 => /usr/lib/x86_64-linux-gnu/libXdmcp.so.6 (0x00007f2cda6d8000)
    libdatrie.so.1 => /usr/lib/x86_64-linux-gnu/libdatrie.so.1 (0x00007f2cda4d1000)
    libsystemd.so.0 => /lib/x86_64-linux-gnu/libsystemd.so.0 (0x00007f2cf82aa000)
    libgpg-error.so.0 => /lib/x86_64-linux-gnu/libgpg-error.so.0 (0x00007f2cda2be000)
    libicudata.so.55 => /usr/lib/x86_64-linux-gnu/libicudata.so.55 (0x00007f2cd8807000)
    libblas.so.3 => /usr/lib/libblas.so.3 (0x00007f2cd8587000)
    liblapack.so.3 => /usr/lib/liblapack.so.3 (0x00007f2cd7dd9000)
    libarpack.so.2 => /usr/lib/libarpack.so.2 (0x00007f2cd7b8b000)
    libsuperlu.so.4 => /usr/lib/x86_64-linux-gnu/libsuperlu.so.4 (0x00007f2cd791f000)
    liblcms2.so.2 => /usr/lib/x86_64-linux-gnu/liblcms2.so.2 (0x00007f2cd76c8000)
    libtiff.so.5 => /usr/lib/x86_64-linux-gnu/libtiff.so.5 (0x00007f2cd7454000)
    libgeos-3.5.0.so => /usr/lib/x86_64-linux-gnu/libgeos-3.5.0.so (0x00007f2cd70ba000)
    libltdl.so.7 => /usr/lib/x86_64-linux-gnu/libltdl.so.7 (0x00007f2cd6eb0000)
    libminizip.so.1 => /usr/lib/x86_64-linux-gnu/libminizip.so.1 (0x00007f2cd6ca4000)
    liburiparser.so.1 => /usr/lib/x86_64-linux-gnu/liburiparser.so.1 (0x00007f2cd6a8e000)
    libhdf5_serial_hl.so.10 => /usr/lib/x86_64-linux-gnu/libhdf5_serial_hl.so.10 (0x00007f2cd686d000)
    libssl.so.1.0.0 => /lib/x86_64-linux-gnu/libssl.so.1.0.0 (0x00007f2cd6604000)
    libcrypto.so.1.0.0 => /lib/x86_64-linux-gnu/libcrypto.so.1.0.0 (0x00007f2cd61bb000)
    libgssapi_krb5.so.2 => /usr/lib/x86_64-linux-gnu/libgssapi_krb5.so.2 (0x00007f2cd5f71000)
    libldap_r-2.4.so.2 => /usr/lib/x86_64-linux-gnu/libldap_r-2.4.so.2 (0x00007f2cd5d1f000)
    liblwgeom-2.1.8.so => /usr/lib/liblwgeom-2.1.8.so (0x00007f2cd5ac1000)
    libidn.so.11 => /usr/lib/x86_64-linux-gnu/libidn.so.11 (0x00007f2cd588e000)
    librtmp.so.1 => /usr/lib/x86_64-linux-gnu/librtmp.so.1 (0x00007f2cd5671000)
    libnettle.so.6 => /usr/lib/x86_64-linux-gnu/libnettle.so.6 (0x00007f2cd543b000)
    libgnutls-deb0.so.28 => /usr/lib/x86_64-linux-gnu/libgnutls-deb0.so.28 (0x00007f2cd511f000)
    liblber-2.4.so.2 => /usr/lib/x86_64-linux-gnu/liblber-2.4.so.2 (0x00007f2cd4f10000)
    libgraphite2.so.3 => /usr/lib/x86_64-linux-gnu/libgraphite2.so.3 (0x00007f2cd4cf4000)
    libgfortran.so.3 => /usr/lib/x86_64-linux-gnu/libgfortran.so.3 (0x00007f2cd49c9000)
    libjbig.so.0 => /usr/lib/x86_64-linux-gnu/libjbig.so.0 (0x00007f2cd47bb000)
    libkrb5.so.3 => /usr/lib/x86_64-linux-gnu/libkrb5.so.3 (0x00007f2cd44e8000)
    libk5crypto.so.3 => /usr/lib/x86_64-linux-gnu/libk5crypto.so.3 (0x00007f2cd42b7000)
    libcom_err.so.2 => /lib/x86_64-linux-gnu/libcom_err.so.2 (0x00007f2cd40b3000)
    libkrb5support.so.0 => /usr/lib/x86_64-linux-gnu/libkrb5support.so.0 (0x00007f2cd3ea8000)
    libsasl2.so.2 => /usr/lib/x86_64-linux-gnu/libsasl2.so.2 (0x00007f2cd3c8d000)
    libgssapi.so.3 => /usr/lib/x86_64-linux-gnu/libgssapi.so.3 (0x00007f2cd3a4d000)
    libjson-c.so.2 => /lib/x86_64-linux-gnu/libjson-c.so.2 (0x00007f2cd3842000)
    libhogweed.so.4 => /usr/lib/x86_64-linux-gnu/libhogweed.so.4 (0x00007f2cd360f000)
    libgmp.so.10 => /usr/lib/x86_64-linux-gnu/libgmp.so.10 (0x00007f2cd338f000)
    libp11-kit.so.0 => /usr/lib/x86_64-linux-gnu/libp11-kit.so.0 (0x00007f2cd312a000)
    libtasn1.so.6 => /usr/lib/x86_64-linux-gnu/libtasn1.so.6 (0x00007f2cd2f17000)
    libquadmath.so.0 => /usr/lib/x86_64-linux-gnu/libquadmath.so.0 (0x00007f2cd2cd8000)
    libkeyutils.so.1 => /lib/x86_64-linux-gnu/libkeyutils.so.1 (0x00007f2cd2ad4000)
    libheimntlm.so.0 => /usr/lib/x86_64-linux-gnu/libheimntlm.so.0 (0x00007f2cd28cb000)
    libkrb5.so.26 => /usr/lib/x86_64-linux-gnu/libkrb5.so.26 (0x00007f2cd2641000)
    libasn1.so.8 => /usr/lib/x86_64-linux-gnu/libasn1.so.8 (0x00007f2cd239e000)
    libhcrypto.so.4 => /usr/lib/x86_64-linux-gnu/libhcrypto.so.4 (0x00007f2cd216b000)
    libroken.so.18 => /usr/lib/x86_64-linux-gnu/libroken.so.18 (0x00007f2cd1f56000)
    libwind.so.0 => /usr/lib/x86_64-linux-gnu/libwind.so.0 (0x00007f2cd1d2d000)
    libheimbase.so.1 => /usr/lib/x86_64-linux-gnu/libheimbase.so.1 (0x00007f2cd1b1e000)
    libhx509.so.5 => /usr/lib/x86_64-linux-gnu/libhx509.so.5 (0x00007f2cd18d3000)
    libcrypt.so.1 => /lib/x86_64-linux-gnu/libcrypt.so.1 (0x00007f2cd169b000)

jasmines

Asked: 2015-10-08 13:05:02 +0800 CST

为什么第一次访问samba共享文件夹总是失败？

3

我与 samba 共享了一个文件夹。仅允许使用用户名和密码进行访问。如果我尝试从 Windows 或 Android 访问，我总是第一次尝试失败，第二次成功。

这是我的 /etc/samba/smb.conf：

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
    workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
    server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
    dns proxy = no

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
    log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
    max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
    syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
    panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller". 
#
# Most people will want "standalone sever" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
    server role = standalone server

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
;   passdb backend = tdbsam

    obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
    unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<[email protected]> for
# sending the correct chat script for the passwd program in Debian Sarge).
    passwd program = /usr/bin/passwd %u
    passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
    pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
    map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set 
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
    usershare allow guests = yes
    username map = /etc/samba/smbusers

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
    comment = All Printers
    browseable = no
    path = /var/spool/samba
    printable = yes
;   guest ok = no
;   read only = yes
    create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
    comment = Printer Drivers
    path = /var/lib/samba/printers
;   browseable = yes
;   read only = yes
;   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

[Pubblici]
    path = /home/mauro/Pubblici
    writeable = yes
;   browseable = yes
    valid users = mauro

这是/var/log/samba/log.smdb： http: //pastebin.com/W30hmKnQ

这是第一次失败尝试的日志：

[2015/10/15 11:38:01.010825,  2] ../source3/param/loadparm.c:3582(do_section)
  Processing section "[printers]"
[2015/10/15 11:38:01.011051,  2] ../source3/param/loadparm.c:3582(do_section)
  Processing section "[print$]"
[2015/10/15 11:38:01.011139,  2] ../source3/param/loadparm.c:3582(do_section)
  Processing section "[Pubblici]"
[2015/10/15 11:38:01.035299,  2] ../source3/auth/auth.c:278(auth_check_ntlm_password)
  check_ntlm_password:  authentication for user [mauro] -> [mauro] -> [mauro] succeeded
[2015/10/15 11:38:01.037346,  1] ../source3/auth/token_util.c:430(add_local_groups)
  SID S-1-5-21-1432355103-2748604540-3142755518-1000 -> getpwuid(4294967295) failed
[2015/10/15 11:38:01.037433,  1] ../source3/smbd/sesssetup.c:276(reply_sesssetup_and_X_spnego)
  Failed to generate session_info (user and group token) for session setup: NT_STATUS_UNSUCCESSFUL

用户权限：

sudo pdbedit -L -v
---------------
Unix username:        mauro
NT username:          
Account Flags:        [U          ]
User SID:             S-1-5-21-1432355103-2748604540-3142755518-1000
Primary Group SID:    S-1-5-21-1432355103-2748604540-3142755518-513
Full Name:            mauro
Home Directory:       \\mauro-m14xr1\mauro
HomeDir Drive:        
Logon Script:         
Profile Path:         \\mauro-m14xr1\mauro\profile
Domain:               MAURO-M14XR1
Account desc:         
Workstations:         
Munged dial:          
Logon time:           0
Logoff time:          mer, 06 feb 2036 16:06:39 CET
Kickoff time:         mer, 06 feb 2036 16:06:39 CET
Password last set:    mar, 16 set 2014 14:13:30 CEST
Password can change:  mar, 16 set 2014 14:13:30 CEST
Password must change: never
Last bad password   : 0
Bad password count  : 0
Logon hours         : FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

jasmines

Asked: 2015-04-10 02:11:47 +0800 CST

启动预缓存和预加载 apparmor 配置文件在启动时失败

0

我在整个互联网上发现很少有关于此故障的主题，因此我无法调试或调查太多。在启动过程中，几个月前我开始看到错误：

* Starting Pre-cache and pre-load apparmor profiles                     [fail]

我不能说它是否在特定升级后开始。我在 Ubuntu 14.10 上。

cat /var/log/upstart/apparmor.log

Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
AppArmor parser error for /etc/apparmor.d/usr.bin.mediascanner-service-2.0 in /etc/apparmor.d/usr.bin.mediascanner-service-2.0 at line 14: Could not open '/usr/share/apparmor/hardware/audio.d'
Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
AppArmor parser error for /etc/apparmor.d/usr.bin.mediascanner-service-2.0 in /etc/apparmor.d/usr.bin.mediascanner-service-2.0 at line 14: Could not open '/usr/share/apparmor/hardware/audio.d'
Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd
Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
AppArmor parser error for /etc/apparmor.d/usr.bin.mediascanner-service-2.0 in /etc/apparmor.d/usr.bin.mediascanner-service-2.0 at line 14: Could not open '/usr/share/apparmor/hardware/audio.d'
Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox
AppArmor parser error for /etc/apparmor.d/usr.bin.mediascanner-service-2.0 in /etc/apparmor.d/usr.bin.mediascanner-service-2.0 at line 14: Could not open '/usr/share/apparmor/hardware/audio.d'
Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd

jasmines

Asked: 2014-07-24 23:58:06 +0800 CST

鼠标光标有时会超出其实际位置一些像素

3

我在 14.04 / Unity。

我不能说如何复制或哪些是偶然条件，但有时我的鼠标光标比它的实际位置高一些像素，所以如果我点击一个对象，可能我点击的是一些像素向下的东西。

单击几下后，这个问题会自行消失，我不能说是如何解决的。

它似乎发生在特定的应用程序中，例如Firefox和Thunderbird......

我需要有关如何调查的建议。

jasmines

Asked: 2014-05-01 02:52:40 +0800 CST

如何在 xfce4 面板中将指标从 Gtk3 恢复到 Gtk2？

0

使用Saucy时，我使用本教程在以下位置设置了gtk3 指标xfce4-panel：

https://wiki.ubuntu.com/Xubuntu/Roadmap/Specifications/Saucy/Gtk3Indicators

现在我升级到Trusty，我看到一个乱七八糟的面板，所以我想恢复到原来的指示器。我能怎么做？

MS Teams 无法识别 Pipewire（但 Pulseaudio 可以）

apt-cache 显示错误的可用软件包版本

我应该维护同一个 Flatpak 包的多个版本吗？

为什么在 kde 中显示桌面（带有 alt 选项卡）会交替呈现两种不同的东西？

打印屏幕键在 Kubuntu 上打开默认浏览器。怎么修？

为什么 android-tools-adb 和 android-tools-fastboot 包被标记为孤立？

升级到 17.10 后 Unity 上的屏幕大小和快捷方式问题

Synapse 在 17.10 与 Wayland 一起崩溃

登录 Wayland 后 Ubuntu 17.10 冻结

ffmpeg56 和 ffmpeg54 软件包是否已停产？

自 ubuntu 16.04 以来 sshpass 中断

升级到 16.04 后 gedit 不会保存并退出

自 16.04 以来不再有引导日志记录？

VLC 强制所有视频大小相同 - 无法调整它们的大小

升级到 Ubuntu 15.10 后 mysql 工作台坏了

为什么第一次访问samba共享文件夹总是失败？

启动预缓存和预加载 apparmor 配置文件在启动时失败

鼠标光标有时会超出其实际位置一些像素

如何在 xfce4 面板中将指标从 Gtk3 恢复到 Gtk2？

如何运行 .sh 脚本？

如何安装 .tar.gz（或 .tar.bz2）文件？

如何列出所有已安装的软件包

无法锁定管理目录 (/var/lib/dpkg/) 是另一个进程在使用它吗？

jasmines's questions