我正在尝试使用不带 PPS 加密狗的 USB GPS 作为 Ubuntu 18.04 上的唯一时间源。GPSD 似乎工作正常，因为 cgps 报告了 3D 修复。但是，我无法通过 chrony 查看 GPS 信息。
# gpsd -ND 8 /dev/ttyUSB0
gpsd:INFO: launching (Version 3.17)
gpsd:IO: opening IPv4 socket
gpsd:SPIN: passivesock_af() -> 3
gpsd:IO: opening IPv6 socket
gpsd:SPIN: passivesock_af() -> 4
gpsd:INFO: listening on port gpsd
gpsd:PROG: NTP: shmat(4718600,0,0) succeeded, segment 0
gpsd:PROG: NTP: shmat(4751369,0,0) succeeded, segment 1
gpsd:PROG: NTP: shmat(4784139,0,0) succeeded, segment 2
gpsd:PROG: NTP: shmat(4816908,0,0) succeeded, segment 3
gpsd:PROG: NTP: shmat(4849677,0,0) succeeded, segment 4
gpsd:PROG: NTP: shmat(4882446,0,0) succeeded, segment 5
gpsd:PROG: NTP: shmat(4915215,0,0) succeeded, segment 6
gpsd:PROG: NTP: shmat(4947984,0,0) succeeded, segment 7
gpsd:PROG: successfully connected to the DBUS system bus
gpsd:PROG: shmget(0x47505344, 8936, 0666) for SHM export succeeded
gpsd:PROG: shmat() for SHM export succeeded, segment 4980753
gpsd:INFO: stashing device /dev/ttyUSB0 at slot 0
gpsd:INFO: running with effective group ID 20
gpsd:INFO: running with effective user ID 128
gpsd:INFO: startup at 2022-12-06T16:50:17.000Z (1670345417)
时间配置文件：
refclock SHM 0 poll 3 refid gps1
keyfile /etc/chrony/chrony.keys
driftfile /var/lib/chrony/chrony.drift
logdir /var/log/chrony
maxupdateskew 10
rtcsync
makestep 1 3
# chronyd -df /etc/chrony/chrony.conf
2022-12-06T16:52:15Z chronyd version 3.2 starting (+CMDMON +NTP +REFCLOCK +RTC +PRIVDROP +SCFILTER +SECHASH +SIGND +ASYNCDNS +IPV6 -DEBUG)
2022-12-06T16:52:15Z Frequency -22.003 +/- 4.168 ppm read from /var/lib/chrony/chrony.drift
# chronyc sources
210 Number of sources = 1
MS Name/IP address Stratum Poll Reach LastRx Last sample
===============================================================================
#? GPS0 0 4 0 - +0ns[ +0ns] +/- 0ns
我认为这个问题与共享内存有关，因为我认为 chrony/gpsd 应该使用 SHM ID 0 但它似乎不存在。
# ipcs -m
------ Shared Memory Segments --------
key shmid owner perms bytes nattch status
0x00000000 262144 localuser 600 67108864 2 dest
0x00000000 229377 localuser 600 16777216 2 dest
0x00000000 360450 localuser 600 524288 2 dest
0x00000000 393219 localuser 600 524288 2 dest
0x00000000 491524 localuser 600 524288 2 dest
0x00000000 5177349 localuser 600 524288 2 dest
0x00000000 5210118 localuser 600 524288 2 dest
0x00000000 655367 localuser 600 524288 2 dest
0x4e545030 4718600 root 600 96 2
0x4e545031 4751369 root 600 96 1
0x00000000 2293770 localuser 600 16777216 2 dest
0x4e545032 4784139 root 666 96 1
0x4e545033 4816908 root 666 96 1
0x4e545034 4849677 root 666 96 1
0x4e545035 4882446 root 666 96 1
0x4e545036 4915215 root 666 96 1
0x4e545037 4947984 root 666 96 1
0x47505344 4980753 root 666 8936 1
0x00000000 5472274 localuser 600 16384 2 dest
0x4e9c5038 5570579 root 600 96 0
0x00000000 5308436 localuser 600 532480 2 dest
0x00000000 5341205 localuser 600 532480 2 dest
0x00000000 5439510 localuser 600 16384 2 dest
0x4ea05041 5603351 root 600 96 0
我试过在 gpsd 之前启动 chronyd，但这没有帮助。有任何想法吗？我错过了一些明显的东西吗？提前致谢。
类似问题： Using gpsd and chrony without pulse per second
我读过的另一个来源： GPSD Time Service HOWTO