主页 / user-4568

shpokas's questions

Martin Hope
shpokas
Asked: 2024-09-17 22:23:55 +0800 CST
  • 5

在基于 RHEL 的系统上，网络应该由 NetworkManager 管理。我想构建一个持久的 VLAN 感知桥配置，该配置在重新启动后仍然有效。基于AB 的出色回答，我为运行 Alma Linux 9.4 的虚拟机创建了一个网络配置，该虚拟机接收 VLAN 1 标记的流量，并且可从管理 VLAN 访问。但如何使其持久？可以使用标准网络管理工具 NetworkManager 来完成吗？

# cat mkbr2.sh 
ip link add name bridge0 type bridge vlan_filtering 1 vlan_default_pvid 0
ip link set dev ens192 master bridge0
ip link set bridge0 up
bridge vlan add vid 1 dev bridge0 pvid untagged self
bridge vlan add vid 2-4094 dev ens192
bridge vlan add vid 1 dev ens192 pvid
ip addr add 10.200.200.106/24 dev bridge0
ip route add default via 10.200.200.10

# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens192: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master bridge0 state UP group default qlen 1000
    link/ether 00:0c:29:44:89:b3 brd ff:ff:ff:ff:ff:ff
    altname enp11s0
6: bridge0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether 00:0c:29:44:89:b3 brd ff:ff:ff:ff:ff:ff
    inet 10.200.200.106/24 scope global bridge0
       valid_lft forever preferred_lft forever
    inet6 fe80::20c:29ff:fe44:89b3/64 scope link 
       valid_lft forever preferred_lft forever

# bridge -compressvlans vlan show
port              vlan-id  
ens192            1 PVID
                  2-4094
bridge0           1 PVID Egress Untagged
networkmanager