在阅读了有关FreeBSD 聚合的信息后,我们认为我们已经准备就绪,但我仍然不清楚。
交换机是 Cisco 2960S(软件 15.x),客户端是运行 Mavericks 的 Mac Pro。我不知道 BSD 内部结构是否相同,但不要指望这些年来它们有太大变化。Mac Pro 是医疗诊所客户的服务器(他们的应用程序需要)。
下面是我在我的交换机上看到的,根据这篇文章,将交换机端口设置为活动状态,然后标志将对等方显示为 SA,这意味着对等方处于活动状态,因此矛盾。如果开关设置为主动,我希望对等方是被动的。
Switch#sh lacp neighbor
Flags: S - Device is requesting Slow LACPDUs
F - Device is requesting Fast LACPDUs
A - Device is in Active mode P - Device is in Passive mode
Channel group 1 neighbors
Partner's information:
LACP port Admin Oper Port Port
Port Flags Priority Dev ID Age key Key Number State
Gi0/47 SA 32768 003e.e1cb.71d4 24s 0x0 0x1 0x4 0x3D
Gi0/48 SA 32768 003e.e1cb.71d4 24s 0x0 0x1 0x5 0x3D
Switch#sh lacp nei de
Flags: S - Device is requesting Slow LACPDUs
F - Device is requesting Fast LACPDUs
A - Device is in Active mode P - Device is in Passive mode
Channel group 1 neighbors
Partner's information:
Partner Partner Partner
Port System ID Port Number Age Flags
Gi0/47 32768,003e.e1cb.71d4 0x4 25s SA
LACP Partner Partner Partner
Port Priority Oper Key Port State
32768 0x1 0x3D
Port State Flags Decode:
Activity: Timeout: Aggregation: Synchronization:
Active Long Yes Yes
Collecting: Distributing: Defaulted: Expired:
Yes Yes No No
Partner Partner Partner
Port System ID Port Number Age Flags
Gi0/48 32768,003e.e1cb.71d4 0x5 25s SA
LACP Partner Partner Partner
Port Priority Oper Key Port State
32768 0x1 0x3D
Port State Flags Decode:
Activity: Timeout: Aggregation: Synchronization:
Active Long Yes Yes
Collecting: Distributing: Defaulted: Expired:
Yes Yes No No
Switch#
谢谢