我用来expand
将制表符扩展到空格。对于utf8
文件expand
不能正常工作。例如,inć\ta
选项卡扩展到 6 个空格,而 ina\ta
扩展到 7 个空格。
如何使其适用于utf8
文件?
我用来expand
将制表符扩展到空格。对于utf8
文件expand
不能正常工作。例如,inć\ta
选项卡扩展到 6 个空格,而 ina\ta
扩展到 7 个空格。
如何使其适用于utf8
文件?
当我连接到我的手机热点时,我希望systemd-resolved
使用 DHCP 提供的 DNS 列表。出于某种原因,对我来说似乎并非如此。
我正在使用 Ubuntu 22.04.1 LTS
/etc/systemd/resolved.conf
是空的
当我连接到我的手机 WiFi 时,我得到以下结果:
ip a show wlp3s0
3: wlp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
inet 192.168.138.69/24 brd 192.168.138.255 scope global dynamic noprefixroute wlp3s0
valid_lft 3411sec preferred_lft 3411sec
journalctl
paź 03 09:25:46 pc systemd-resolved[5434]: wlp3s0: Bus client set DNS server list to: 192.168.185.139, 192.168.22.175, 192.168.78.16
tcpdump -i wlp3s0 -e -nn -vv
tcpdump: listening on wlp3s0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
09:25:46.427512 xx:xx:xx:xx:xx:xx > ff:ff:ff:ff:ff:ff, ethertype IPv4 (0x0800), length 339: (tos 0xc0, ttl 64, id 0, offset 0, flags [DF], proto UDP (17), length 325)
0.0.0.0.68 > 255.255.255.255.67: [udp sum ok] BOOTP/DHCP, Request from xx:xx:xx:xx:xx:xx, length 297, xid 0xd83b70be, secs 1, Flags [none] (0x0000)
Client-Ethernet-Address xx:xx:xx:xx:xx:xx
Vendor-rfc1048 Extensions
Magic Cookie 0x63825363
DHCP-Message (53), length 1: Request
Client-ID (61), length 7: ether xx:xx:xx:xx:xx:xx
Parameter-Request (55), length 17:
Subnet-Mask (1), Time-Zone (2), Domain-Name-Server (6), Hostname (12)
Domain-Name (15), MTU (26), BR (28), Classless-Static-Route (121)
Default-Gateway (3), Static-Route (33), YD (40), YS (41)
NTP (42), Unknown (119), Classless-Static-Route-Microsoft (249), Unknown (252)
RP (17)
MSZ (57), length 2: 576
Requested-IP (50), length 4: 192.168.138.69
Hostname (12), length 13: "pc"
09:25:46.445267 yy:yy:yy:yy:yy:yy > xx:xx:xx:xx:xx:xx, ethertype IPv4 (0x0800), length 366: (tos 0x0, ttl 64, id 44909, offset 0, flags [DF], proto UDP (17), length 352)
192.168.138.79.67 > 192.168.138.69.68: [udp sum ok] BOOTP/DHCP, Reply, length 324, xid 0xd83b70be, Flags [none] (0x0000)
Your-IP 192.168.138.69
Server-IP 192.168.138.79
Client-Ethernet-Address xx:xx:xx:xx:xx:xx
Vendor-rfc1048 Extensions
Magic Cookie 0x63825363
DHCP-Message (53), length 1: ACK
Server-ID (54), length 4: 192.168.138.79
Lease-Time (51), length 4: 3599
RN (58), length 4: 1799
RB (59), length 4: 3149
Subnet-Mask (1), length 4: 255.255.255.0
BR (28), length 4: 192.168.138.255
Default-Gateway (3), length 4: 192.168.138.79
Domain-Name-Server (6), length 4: 192.168.138.79
Hostname (12), length 13: "pc"
Vendor-Option (43), length 15: 65.78.68.82.79.73.68.95.77.69.84.69.82.69.68
如果我执行,则使用预期的 DNS dhclient -r wlp3s0 && dhclient wlp3s0
:
journalctl
paź 03 09:45:02 pc systemd-resolved[5434]: wlp3s0: Bus client set DNS server list to: 192.168.138.79
systemctl restart systemd-resolved
带回意外的 ips。为什么systemd-resolved
使用 IP 地址: 192.168.185.139
, 192.168.22.175
,192.168.78.16
作为 DNS 服务器而不是 DHCP 提供的192.168.138.79
?它是如何得出地址的?