AskOverflow.Dev

AskOverflow.Dev Logo AskOverflow.Dev Logo

AskOverflow.Dev Navigation

  • 主页
  • 系统&网络
  • Ubuntu
  • Unix
  • DBA
  • Computer
  • Coding
  • LangChain

Mobile menu

Close
  • 主页
  • 系统&网络
    • 最新
    • 热门
    • 标签
  • Ubuntu
    • 最新
    • 热门
    • 标签
  • Unix
    • 最新
    • 标签
  • DBA
    • 最新
    • 标签
  • Computer
    • 最新
    • 标签
  • Coding
    • 最新
    • 标签
主页 / user-962971

garrettlynchirl's questions

Martin Hope
garrettlynchirl
Asked: 2024-11-25 01:52:28 +0800 CST

无法从 IOS 使用 Samba 访问 Ubuntu

  • 5

我正在尝试从 IOS iPad 连接到 Ubuntu 计算机。按照此处的说明(您可以将 iPhone 连接到 Ubuntu 媒体共享吗?)我已经共享了我的用户文档文件夹并连接到它,但当我尝试打开它时,我收到“内容不可用”消息(见屏幕截图)。我在网上读到了一些建议,删除 IOS 上的文件应用程序并再次下载,重新启动 iPad - 但这些都没有改变。有什么想法可能是什么问题吗?

IOS 未显示 Ubuntu

更新 1:

以下是文件内容/etc/samba/smb.conf。我使用的是 Ubuntu 22.04。我也尝试过从 OSX 连接到 Ubuntu 计算机 - 同样的问题,连接但不显示内容。

# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
# Append syslog@1 if you want important messages to be sent to syslog too.
   logging = file

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller". 
#
# Most people will want "standalone server" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
   server role = standalone server

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<[email protected]> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = classic
# primary domain controller', 'server role = classic backup domain controller'
# or 'domain logons' is set 
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap config * :              backend = tdb
;   idmap config * :              range   = 3000-7999
;   idmap config YOURDOMAINHERE : backend = tdb
;   idmap config YOURDOMAINHERE : range   = 100000-999999
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 means that usershare is disabled.
#   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

更新2:

以下输出net usershare info --long:

$ net usershare info --long
[Documents]
path=/home/garrett/Documents
comment=
usershare_acl=Everyone:F,
guest_ok=n
22.04
  • 1 个回答
  • 42 Views
Martin Hope
garrettlynchirl
Asked: 2019-06-12 10:47:16 +0800 CST

如何控制所有窗口阴影?

  • 2

如何控制所有窗口下拉/框阴影?Gnome 主题似乎有不同大小的阴影,所以我认为这是可能的。

这是我尝试过的:

  1. 在“~/.config/gtk-3.0/gtk.css”中编辑 gtk.css,添加:

    .window-frame {box-shadow: none;}
    .window-frame:backdrop {box-shadow: none;}
    
  2. 我将相同的 css 添加到安装在“~/.themes/”中的下载主题的副本中——它没有 .window-frame 类,所以我添加了它。

  3. 我添加了相同的 css 以及从“/usr/share/themes/”中复制的默认主题之一(信天翁)——它在“gtk-widgets.css”中有一个 .window-frame 类,所以我对其进行了修改。

每次之后我都重新启动了 Gnome shell。尝试 1 和 2 什么也没做。尝试 3 确实摆脱了阴影,但似乎也影响了应用程序的刷新 - 文本滚动不会刷新。

--

规格:带有 Gnome/Mutter 的 Ubuntu 18.04

gnome themes gtk 18.04
  • 1 个回答
  • 7579 Views
Martin Hope
garrettlynchirl
Asked: 2019-06-09 04:40:38 +0800 CST

如何取消隐藏窗口菜单?

  • 1

我不小心使用 view > hide 隐藏了 Ubuntu Studio 18.04 中的窗口菜单。我已经安装了compiz。我如何取消隐藏它?我看不到任何明显的方法,右键单击工具栏没有选项,重新启动 compiz,查看其窗口装饰设置,在 dconf 编辑器中看不到任何设置。

在此处输入图像描述

compiz window ubuntu-studio
  • 1 个回答
  • 984 Views
Martin Hope
garrettlynchirl
Asked: 2019-06-07 11:06:46 +0800 CST

乌布图工作室中的 Compiz

  • 0

我正在尝试在双启动 Mac 上的 Ububtu Studio 18.04 中设置 compiz(规格如下)我安装了 compiz:

sudo apt-get install compiz*

似乎工作和设置管理器在那里。然后我通过取消勾选启用显示合成(设置管理器>窗口管理器调整>合成器)禁用了默认合成器。我运行compiz:

compiz --replace

如果完成并且窗口元素消失,它似乎会在之前崩溃。Compiz 似乎可以像窗口移动翘曲一样起作用。我将compiz添加到(设置管理器>会话和启动>应用程序自动启动)并重新启动。仍然没有窗口元素,现在 compiz 不起作用。

关于问题可能是什么或我可以尝试什么的任何想法?

--

Mac Mini 2010 年中,2.4Ghz Intel Core 2 Duo Nvidia GeForce 320m 256mb

compiz dual-boot nvidia mac xfce
  • 1 个回答
  • 38 Views

Sidebar

Stats

  • 问题 205573
  • 回答 270741
  • 最佳答案 135370
  • 用户 68524
  • 热门
  • 回答
  • Marko Smith

    如何运行 .sh 脚本?

    • 16 个回答
  • Marko Smith

    如何安装 .tar.gz(或 .tar.bz2)文件?

    • 14 个回答
  • Marko Smith

    如何列出所有已安装的软件包

    • 24 个回答
  • Marko Smith

    无法锁定管理目录 (/var/lib/dpkg/) 是另一个进程在使用它吗?

    • 25 个回答
  • Martin Hope
    Flimm 如何在没有 sudo 的情况下使用 docker? 2014-06-07 00:17:43 +0800 CST
  • Martin Hope
    Ivan 如何列出所有已安装的软件包 2010-12-17 18:08:49 +0800 CST
  • Martin Hope
    La Ode Adam Saputra 无法锁定管理目录 (/var/lib/dpkg/) 是另一个进程在使用它吗? 2010-11-30 18:12:48 +0800 CST
  • Martin Hope
    David Barry 如何从命令行确定目录(文件夹)的总大小? 2010-08-06 10:20:23 +0800 CST
  • Martin Hope
    jfoucher “以下软件包已被保留:”为什么以及如何解决? 2010-08-01 13:59:22 +0800 CST
  • Martin Hope
    David Ashford 如何删除 PPA? 2010-07-30 01:09:42 +0800 CST

热门标签

10.10 10.04 gnome networking server command-line package-management software-recommendation sound xorg

Explore

  • 主页
  • 问题
    • 最新
    • 热门
  • 标签
  • 帮助

Footer

AskOverflow.Dev

关于我们

  • 关于我们
  • 联系我们

Legal Stuff

  • Privacy Policy

Language

  • Pt
  • Server
  • Unix

© 2023 AskOverflow.DEV All Rights Reserve