在 ubuntu 18.04 上，我们在 gfceu 存储库中有 NES 模拟器...

Ubuntu 18.04

$ apt search gfceu
Sorting... Done
Full Text Search... Done
gfceu/bionic,bionic,now 0.6.1-0ubuntu4 all [installed]
  Graphical front-end using GTK2 for the FCE Ultra NES emulator
$

但是在 Ubuntu 20.04 上它不存在...

Ubuntu 20.04

$ apt search gfceu
Sorting... Done
Full Text Search... Done
$

那么我们如何安装呢？

R9-290/290X Hawaii 系列卡不适用于 ubuntu 18 中的 Linux 内核 4.19.x 和 4.20.x 最后一个功能齐全的内核版本是 4.18.20 这是最新的稳定 mesa 驱动程序和 amdgpu drm 驱动程序-核心。

4.19.x 和 4.20.x 导致启动失败或根本无法启动（grub 后黑屏，无 tty）。

根据 grub linux 命令行参数，我能够获得不稳定的桌面启动，以进一步调查和收集状态证据。这里是...

内核和命令行

核心：

Linux version 4.20.0-042000-generic (kernel@tangerine) (gcc version 8.2.0 (Ubuntu 8.2.0-12ubuntu1)) #201812232030 SMP Mon Dec 24 01:32:58 UTC 2018

内核命令行：

BOOT_IMAGE=/vmlinuz-4.20.0-042000-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash radeon.si_support=0 radeon.cik_support=0 amdgpu.si_support=1 amdgpu.cik_support=1 amdgpu.dc=1

lspci -v适用于 Linux 内核 4.20.0

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii XT / Grenada XT [Radeon R9 290X/390X] (prog-if 00 [VGA controller])
    Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii XT / Grenada XT [Radeon R9 290X/390X]
    Flags: fast devsel, IRQ 16
    Memory at d0000000 (64-bit, prefetchable) [size=256M]
    Memory at ef800000 (64-bit, prefetchable) [size=8M]
    I/O ports at ae00 [size=256]
    Memory at fb980000 (32-bit, non-prefetchable) [size=256K]
    [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
    Capabilities: [48] Vendor Specific Information: Len=08 <?>
    Capabilities: [50] Power Management version 3
    Capabilities: [58] Express Legacy Endpoint, MSI 00
    Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
    Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
    Capabilities: [150] Advanced Error Reporting
    Capabilities: [270] #19
    Capabilities: [2b0] Address Translation Service (ATS)
    Capabilities: [2c0] Page Request Interface (PRI)
    Capabilities: [2d0] Process Address Space ID (PASID)
    Kernel modules: radeon, amdgpu

01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X]
    Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X]
    Flags: bus master, fast devsel, latency 0, IRQ 32
    Memory at fb9fc000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [48] Vendor Specific Information: Len=08 <?>
    Capabilities: [50] Power Management version 3
    Capabilities: [58] Express Legacy Endpoint, MSI 00
    Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
    Capabilities: [150] Advanced Error Reporting
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel

上次启动内核 4.20 只有一个显示工作。

其他显示器强制镜像。其他 GPU 端口不工作。journalctl -b | grep drm输出：

[drm] amdgpu kernel modesetting enabled.
[drm] initializing kernel modesetting (HAWAII 0x1002:0x67B0 0x1002:0x0B00 0x00).
[drm] register mmio base: 0xFB980000
[drm] register mmio size: 262144
[drm] add ip block number 0 <cik_common>
[drm] add ip block number 1 <gmc_v7_0>
[drm] add ip block number 2 <cik_ih>
[drm] add ip block number 3 <gfx_v7_0>
[drm] add ip block number 4 <cik_sdma>
[drm] add ip block number 5 <powerplay>
[drm] add ip block number 6 <dm>
[drm] add ip block number 7 <uvd_v4_2>
[drm] add ip block number 8 <vce_v2_0>
[drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[drm:gmc_v7_0_sw_init [amdgpu]] *ERROR* Failed to load mc firmware!
[drm:amdgpu_device_init.cold.31 [amdgpu]] *ERROR* sw_init of IP block <gmc_v7_0> failed -2
[drm] amdgpu: finishing device.

linux Kernel 4.18.20 的最后一次成功启动。

所有显示器工作。一切正常。这里供参考，journalctl | grep drm输出：

[drm] amdgpu kernel modesetting enabled.
fb: switching to amdgpudrmfb from VESA VGA
[drm] initializing kernel modesetting (HAWAII 0x1002:0x67B0 0x1002:0x0B00 0x00).
[drm] register mmio base: 0xFB980000
[drm] register mmio size: 262144
[drm] probing gen 2 caps for device 8086:151 = 261ac83/e
[drm] probing mlw for device 8086:151 = 261ac83
[drm] add ip block number 0 <cik_common>
[drm] add ip block number 1 <gmc_v7_0>
[drm] add ip block number 2 <cik_ih>
[drm] add ip block number 3 <ci_dpm>
[drm] add ip block number 4 <dm>
[drm] add ip block number 5 <gfx_v7_0>
[drm] add ip block number 6 <cik_sdma>
[drm] add ip block number 7 <uvd_v4_2>
[drm] add ip block number 8 <vce_v2_0>
[drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 512bits GDDR5
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F4007E9000).
[drm] Internal thermal controller with fan control
[drm] Invalid PCC GPIO: 13!
[drm] amdgpu: dpm initialized
[drm] Found UVD firmware Version: 1.64 Family ID: 9
[drm] Found VCE firmware Version: 50.10 Binary ID: 2
[drm] PCIE gen 3 link speeds already enabled
[drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[drm] dce110_link_encoder_construct: Failed to get encoder_cap_info from VBIOS with error code 4!
[drm] Display Core initialized with v3.1.44!
[drm] SADs count is: -524, don't need to read it
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] UVD initialized successfully.
[drm] VCE initialized successfully.
[drm] fb mappable at 0xD0BD0000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
[drm] dce_get_required_clocks_state: clocks unsupported disp_clk 681000 pix_clk 148500
amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.26.0 20150101 for 0000:01:00.0 on minor 0

基本上我正在寻找类似于选择一块文本或行并点击标签的东西；但不是制表符，而是使用空格键。

有没有简单的捷径？在任何地方都找不到任何东西。当我选择一个文本块并点击空格键时，它会用一个空格替换很多！

我已经能够成功地完成构建 python 3.7.0 但最后一个可选模块一直在网上溜走！_dbm

为此需要什么 ubuntu 或 debian 软件包？

The necessary bits to build these optional modules were not found:
_dbm

我已经能够包含在构建中_gdbm但没有_dbm，为什么？我已经安装libgdbm-dev（解决了_gdbm），但无法明确找到任何其他*dbm-dev与_dbm.

如果有人知道我缺少什么，我将非常感激！

环境：

• Ubuntu 18.04
• gcc8.2
• python3.7.0源码
• 使用配置 --enable-optimizations --with-lto

任何人都知道是否有xprintidle运行 Wayland 的 Ubuntu 版本？

如果不是，那么xprintidle在 Wayland 下以毫秒为单位计算用户空闲时间的替代方法是什么？

有趣的是，当它现在基本上被 Wayland 破坏时，该应用程序仍在存储库中。