主页 / user-134500

ylluminate's questions

Martin Hope
ylluminate
Asked: 2018-01-05 09:52:51 +0800 CST
  • 1

我一直对运行 Liquorix 内核来增强游戏和实时性能很感兴趣。这是一个非常直接的安装，但我发现它与 NVIDIA 驱动程序不兼容。

原文参考：这里（存档）

我遇到了以下错误：

ERROR (dkms apport): kernel package linux-headers-4.14.0-10.1-liquorix-amd64 is not supported 
Error! Bad return status for module build on kernel: 4.14.0-10.1-liquorix-amd64 (x86_64) 
Consult /var/lib/dkms/ndiswrapper/1.60/build/make.log for more information. 
ERROR (dkms apport): kernel package linux-headers-4.14.0-10.1-liquorix-amd64 is not supported 
Error! Bad return status for module build on kernel: 4.14.0-10.1-liquorix-amd64 (x86_64) 
Consult /var/lib/dkms/nvidia-384/384.90/build/make.log for more information.
nvidia
Martin Hope
ylluminate
Asked: 2016-07-16 12:04:09 +0800 CST
  • 2

安装 16.04 后，默认 Nouveau 驱动程序未检测到 Dell 2408WFP。然后我安装了实际的 Nvidia 驱动程序，希望得到不同的结果，但产生了相同的结果。

我现在又换了显示器，还是没有出现。这些监视器仅CRT-0在NVIDIA X Server Settings控制面板中显示。

关于我可以做些什么来强制 X 和 Nvidia 驱动程序检测连接的正确显示器的任何想法？

这是我的 Xorg.0.log 的副本以供审核。

当我xorg.conf使用以下内容进行修改时：

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Viewport   0 0
        Depth     24
        Modes "1366x768"
    EndSubSection
EndSection

不幸的是，我收到以下错误：

Could not apply the stored configuration for monitors

none of the selected modes were compatible with the possible modes:
Trying modes for CRTC 634
CRTC 634: trying mode 640x480@60Hz with output at 1152x864@60Hz (pass 0)
CRTC 634: trying mode 320x240@120Hz with output at 1152x864@60Hz (pass 0)
CRTC 634: trying mode 640x480@60Hz with output at 1152x864@60Hz (pass 1)
CRTC 634: trying mode 320x240@120Hz with output at 1152x864@60Hz (pass 1)
Trying modes for CRTC 635
CRTC 635: trying mode 640x480@60Hz with output at 1152x864@60Hz (pass 0)
CRTC 635: trying mode 320x240@120Hz with output at 1152x864@60Hz (pass 0)
CRTC 635: trying mode 640x480@60Hz with output at 1152x864@60Hz (pass 1)
CRTC 635: trying mode 320x240@120Hz with output at 1152x864@60Hz (pass 1)
Trying modes for CRTC 636
CRTC 636: trying mode 640x480@60Hz with output at 1152x864@60Hz (pass 0)
CRTC 636: trying mode 320x240@120Hz with output at 1152x864@60Hz (pass 0)
CRTC 636: trying mode 640x480@60Hz with output at 1152x864@60Hz (pass 1)
CRTC 636: trying mode 320x240@120Hz with output at 1152x864@60Hz (pass 1)
Trying modes for CRTC 637
CRTC 637: trying mode 640x480@60Hz with output at 1152x864@60Hz (pass 0)
CRTC 637: trying mode 320x240@120Hz with output at 1152x864@60Hz (pass 0)
CRTC 637: trying mode 640x480@60Hz with output at 1152x864@60Hz (pass 1)
CRTC 637: trying mode 320x240@120Hz with output at 1152x864@60Hz (pass 1)
nvidia