主页 / unix / 问题 / 782917
Accepted
rnso
Asked: 2024-09-03 03:29:37 +0800 CST

外部硬盘未连接

  • 772

我最近安装了 Debian Stable 12.7，它运行良好。我尝试连接外部硬盘（我假设它将具有 NTFS 分区）。硬盘上的灯亮了，它开始发出嗡嗡声，但没有连接。以下是“dmesg”命令的输出：

[  299.027072] ISO 9660 Extensions: Microsoft Joliet Level 1
[  299.030692] ISOFS: changing to secondary root
[  461.519421] usb 1-1.3.3: USB disconnect, device number 5
[  461.780067] usb 1-1.3.3: new high-speed USB device number 6 using ehci-pci
[  461.888648] usb 1-1.3.3: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
[  461.888656] usb 1-1.3.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[  461.888660] usb 1-1.3.3: Product: USB2.0 HUB
[  461.889073] hub 1-1.3.3:1.0: USB hub found
[  461.889248] hub 1-1.3.3:1.0: 4 ports detected
[  462.612070] usb 1-1.3.3.3: new high-speed USB device number 7 using ehci-pci
[  462.821973] usb 1-1.3.3.3: New USB device found, idVendor=1058, idProduct=2626, bcdDevice=10.34
[  462.821981] usb 1-1.3.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  462.821985] usb 1-1.3.3.3: Product: My Passport 2626
[  462.821987] usb 1-1.3.3.3: Manufacturer: Western Digital
[  462.821989] usb 1-1.3.3.3: SerialNumber: 575832324139335238333439
[  462.871255] usb-storage 1-1.3.3.3:1.0: USB Mass Storage device detected
[  462.871439] scsi host6: usb-storage 1-1.3.3.3:1.0
[  462.871558] usbcore: registered new interface driver usb-storage
[  462.878172] usbcore: registered new interface driver uas
[  463.889586] scsi 6:0:0:0: Direct-Access     WD       My Passport 2626 1034 PQ: 0 ANSI: 6
[  463.890390] scsi 6:0:0:1: Enclosure         WD       SES Device       1034 PQ: 0 ANSI: 6
[  463.900858] sd 6:0:0:0: Attached scsi generic sg3 type 0
[  463.901059] scsi 6:0:0:1: Attached scsi generic sg4 type 13
[  463.904605] sd 6:0:0:0: [sdc] Spinning up disk...
[  464.912081] ..................................................................................................not responding...
[  576.243597] sd 6:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_OK driverbyte=DRIVER_OK
[  576.243607] sd 6:0:0:0: [sdc] Sense Key : Not Ready [current] 
[  576.243610] sd 6:0:0:0: [sdc] Add. Sense: Logical unit is in process of becoming ready
[  578.244590] sd 6:0:0:0: [sdc] 0 512-byte logical blocks: (0 B/0 B)
[  578.244599] sd 6:0:0:0: [sdc] 0-byte physical blocks
[  580.245617] sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled
[  582.246626] sd 6:0:0:0: [sdc] Asking for cache data failed
[  582.246639] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[  582.247059] sd 6:0:0:0: [sdc] Attached SCSI disk
[  596.259393] scsi 6:0:0:1: Failed to get diagnostic page 0x1
[  596.259405] scsi 6:0:0:1: Failed to bind enclosure -19
[  596.259435] ses 6:0:0:1: Attached Enclosure device

问题是什么？如何解决？

external-hdd

1 个回答

  1. Best Answer

    磁盘不响应命令。没有软件方法可以解决这个问题；确保供电充足；您可以尝试使用不同的外置机箱来安装同一个磁盘，否则假设磁盘已物理损坏。

    • 4

相关问题