luisito_36提出的问题 -ubuntu

luisito_36

Asked: 2022-11-01 10:15:31 +0800 CST

22.04 wine的xbox控制器出现错误，如何解决？

6

首先，我按照这个网站wine的步骤安装，没有安装 about因为这个，并且还安装了更多输入这些命令：winehq

$ sudo apt-get install wine32

$ sudo apt-get install winetricks

$ winetricks dotnet45

$ export WINEPREFIX="$HOME/.wine"

$ wineboot

我输入了wine64 uninstaller添加包的命令：

wine-mono-7.4.0.msi
wine-gecko-2.47.2-x86.msi和wine-gecko-2.47.2-x86_64.msi
.NET-Desktop-Runtime-6.0.10-x86和.NET-Desktop-Runtime-6.0.10-x64
xi.win7.x86.en.msi（我的xbox360摇杆的原驱动）
xi.win7.x64.en.msi（我无法安装，所以改为修复选项）

我按照这个网站xboxdrv上的安装步骤来使用我的 Xbox 360 游戏杆。
我安装了open-joystick-display-2.8.0-x64-linux.deb来检查我的 xbox360 游戏杆的输入：

我通过 wine 安装了open-joystick-display-2.8.0-x64-windows.exe来检查我的 xbox360 游戏杆的输入：

我输入了命令来检查 Ubuntu（左侧）和 wine（右侧）控制器之间的区别：

$ jstest.gtk

$ wine control joy.cpl

我检查了Ubuntu的控制器工作正常，而wine的控制器有错误，例如上图不是四个轴，而是四个按钮，而且Rz轴根本不工作。

谁能告诉我如何解决？

luisito_36

Asked: 2020-10-08 06:08:11 +0800 CST

如何从 Ubuntu 20.04 中删除和清除 EasyScreenCast？

1

我输入sudo apt remove easyscreencast并得到了结果：

    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    E: Unable to locate package easyscreencast

所以任何人都可以向我解释如何删除和清除 EasyScreenCast？

luisito_36

Asked: 2020-06-10 12:27:54 +0800 CST

在 Ubuntu 18.04.4 上安装双频 USB 适配器 2.4/5GHz Wi-Fi 时出现问题

1

双频 USB 适配器 2.4/5GHz 1200(866+300)Mbps 无线速度与 802.11ac

所以最近我购买了带有 CD 上驱动程序的双频 USB 适配器，以安装在 Windows、Mac 和 Linux 上。

我正在使用Ubuntu 18.04.4 LTS - 64 位

1. 将适配器连接到USB端口后，我检查了输入终端的端口lsusb，我得到以下信息：

Bus 001 Device 007: ID 0bda:b812 Realtek Semiconductor Corp.

2. sudo dkms status然后我什么也没得到。

3. 然后我在 CD 中名为 ( RTL81888192EUS_linux_v4.3.0.4_11485.20140519chmod +x install.sh ) 的文件夹中安装 Wi-Fi 2.4GHz，在终端中输入，然后sudo ./install.sh我得到以下结果：

##################################################
Realtek Wi-Fi driver Auto installation script
Novembor, 21 2011 v1.1.0
##################################################
Decompress the driver source tar ball:
    rtl8188EUS_linux_v4.3.0.4_11485.20140519.tar.gz
rtl8188EUS_linux_v4.3.0.4_11485.20140519/ (all files)

Authentication requested [root] for make clean:
cd hal/OUTSRC/ ; rm -fr */*.mod.c */*.mod */*.o */.*.cmd */*.ko
cd hal/OUTSRC/ ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko 
cd hal/led ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd hal ; rm -fr */*/*.mod.c */*/*.mod */*/*.o */*/.*.cmd */*/*.ko
cd hal ; rm -fr */*.mod.c */*.mod */*.o */.*.cmd */*.ko
cd hal ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd core/efuse ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd core ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd os_dep/linux ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd os_dep ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd platform ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
rm -fr Module.symvers ; rm -fr Module.markers ; rm -fr modules.order
rm -fr *.mod.c *.mod *.o .*.cmd *.ko *~
rm -fr .tmp_versions
Authentication requested [root] for make driver:
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/4.15.0-101-generic/build M=/home/luisito/Documents/RTL81888192EUS_linux_v4.3.0.4_11485.20140519/driver/rtl8188EUS_linux_v4.3.0.4_11485.20140519  modules
make[1]: Entering directory '/usr/src/linux-headers-4.15.0-101-generic'
CC [M]  /home/luisito/Documents/RTL81888192EUS_linux_v4.3.0.4_11485.20140519/driver/rtl8188EUS_linux_v4.3.0.4_11485.20140519/core/rtw_cmd.o
In file included from /home/luisito/Documents/RTL81888192EUS_linux_v4.3.0.4_11485.20140519/driver/rtl8188EUS_linux_v4.3.0.4_11485.20140519/include/osdep_service.h:41:0,
                 from /home/luisito/Documents/RTL81888192EUS_linux_v4.3.0.4_11485.20140519/driver/rtl8188EUS_linux_v4.3.0.4_11485.20140519/include/drv_types.h:32,
                 from /home/luisito/Documents/RTL81888192EUS_linux_v4.3.0.4_11485.20140519/driver/rtl8188EUS_linux_v4.3.0.4_11485.20140519/core/rtw_cmd.c:22:
/home/luisito/Documents/RTL81888192EUS_linux_v4.3.0.4_11485.20140519/driver/rtl8188EUS_linux_v4.3.0.4_11485.20140519/include/osdep_service_linux.h: In function ‘_init_timer’:
/home/luisito/Documents/RTL81888192EUS_linux_v4.3.0.4_11485.20140519/driver/rtl8188EUS_linux_v4.3.0.4_11485.20140519/include/osdep_service_linux.h:253:8: error: ‘_timer {aka struct timer_list}’ has no member named ‘data’
  ptimer->data = (unsigned long)cntx;
        ^~
/home/luisito/Documents/RTL81888192EUS_linux_v4.3.0.4_11485.20140519/driver/rtl8188EUS_linux_v4.3.0.4_11485.20140519/include/osdep_service_linux.h:254:2: error: implicit declaration of function ‘init_timer’; did you mean ‘_init_timer’? [-Werror=implicit-function-declaration]
  init_timer(ptimer);
  ^~~~~~~~~~
  _init_timer
In file included from /home/luisito/Documents/RTL81888192EUS_linux_v4.3.0.4_11485.20140519/driver/rtl8188EUS_linux_v4.3.0.4_11485.20140519/include/drv_types.h:32:0,
             from /home/luisito/Documents/RTL81888192EUS_linux_v4.3.0.4_11485.20140519/driver/rtl8188EUS_linux_v4.3.0.4_11485.20140519/core/rtw_cmd.c:22:
/home/luisito/Documents/RTL81888192EUS_linux_v4.3.0.4_11485.20140519/driver/rtl8188EUS_linux_v4.3.0.4_11485.20140519/include/osdep_service.h: In function ‘thread_enter’:
/home/luisito/Documents/RTL81888192EUS_linux_v4.3.0.4_11485.20140519/driver/rtl8188EUS_linux_v4.3.0.4_11485.20140519/include/osdep_service.h:342:2: error: implicit declaration of function ‘allow_signal’; did you mean ‘do_signal’? [-Werror=implicit-function-declaration]
  allow_signal(SIGTERM);
  ^~~~~~~~~~~~
  do_signal
/home/luisito/Documents/RTL81888192EUS_linux_v4.3.0.4_11485.20140519/driver/rtl8188EUS_linux_v4.3.0.4_11485.20140519/include/osdep_service.h: In function ‘flush_signals_thread’:
/home/luisito/Documents/RTL81888192EUS_linux_v4.3.0.4_11485.20140519/driver/rtl8188EUS_linux_v4.3.0.4_11485.20140519/include/osdep_service.h:352:6: error: implicit declaration of function ‘signal_pending’; did you mean ‘timer_pending’? [-Werror=implicit-function-declaration]
  if (signal_pending (current))
      ^~~~~~~~~~~~~~
      timer_pending
/home/luisito/Documents/RTL81888192EUS_linux_v4.3.0.4_11485.20140519/driver/rtl8188EUS_linux_v4.3.0.4_11485.20140519/include/osdep_service.h:354:3: error: implicit declaration of function ‘flush_signals’; did you mean ‘do_signal’? [-Werror=implicit-function-declaration]
   flush_signals(current);
   ^~~~~~~~~~~~~
   do_signal
cc1: some warnings being treated as errors
scripts/Makefile.build:330: recipe for target '/home/luisito/Documents/RTL81888192EUS_linux_v4.3.0.4_11485.20140519/driver/rtl8188EUS_linux_v4.3.0.4_11485.20140519/core/rtw_cmd.o' failed
make[2]: *** [/home/luisito/Documents/RTL81888192EUS_linux_v4.3.0.4_11485.20140519/driver/rtl8188EUS_linux_v4.3.0.4_11485.20140519/core/rtw_cmd.o] Error 1
Makefile:1577: recipe for target '_module_/home/luisito/Documents/RTL81888192EUS_linux_v4.3.0.4_11485.20140519/driver/rtl8188EUS_linux_v4.3.0.4_11485.20140519' failed
make[1]: *** [_module_/home/luisito/Documents/RTL81888192EUS_linux_v4.3.0.4_11485.20140519/driver/rtl8188EUS_linux_v4.3.0.4_11485.20140519] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-4.15.0-101-generic'
Makefile:1318: recipe for target 'modules' failed
make: *** [modules] Error 2
##################################################
Compile make driver error: 2
Please check error Mesg
##################################################

似乎该文件夹中不存在文件rtw_cmd.o，因此它已失败。

4.最后，我在 CD 中名为 ( RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407 ) 的文件夹中安装了 Wi-Fi 5GHz，在终端中输入chmod +x install.sh，然后sudo ./install.sh我得到以下结果：

##################################################
Realtek Wi-Fi driver Auto installation script
Novembor, 21 2011 v1.1.0
##################################################
Decompress the driver source tar ball:
    rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760.tar.gz
rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760/ (all files)

Authentication requested [root] for make clean:
#make -C /lib/modules/4.15.0-101-generic/build M=/home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760 clean
cd hal ; rm -fr */*/*/*.mod.c */*/*/*.mod */*/*/*.o */*/*/.*.cmd */*/*/*.ko
cd hal ; rm -fr */*/*.mod.c */*/*.mod */*/*.o */*/.*.cmd */*/*.ko
cd hal ; rm -fr */*.mod.c */*.mod */*.o */.*.cmd */*.ko
cd hal ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd core/efuse ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd core ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd os_dep/linux ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd os_dep ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
cd platform ; rm -fr *.mod.c *.mod *.o .*.cmd *.ko
rm -fr Module.symvers ; rm -fr Module.markers ; rm -fr modules.order
rm -fr *.mod.c *.mod *.o .*.cmd *.ko *~
rm -fr .tmp_versions
Authentication requested [root] for make driver:
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/4.15.0-101-generic/build M=/home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760  modules
make[1]: Entering directory '/usr/src/linux-headers-4.15.0-101-generic'
  CC [M]  /home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760/core/rtw_cmd.o
In file included from /home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760/include/osdep_service.h:47:0,
                 from /home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760/include/drv_types.h:32,
                 from /home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760/core/rtw_cmd.c:22:
/home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760/include/osdep_service_linux.h: In function ‘_init_timer’:
/home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760/include/osdep_service_linux.h:288:8: error: ‘_timer {aka struct timer_list}’ has no member named ‘data’
  ptimer->data = (unsigned long)cntx;
        ^~
/home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760/include/osdep_service_linux.h:289:2: error: implicit declaration of function ‘init_timer’; did you mean ‘_init_timer’? [-Werror=implicit-function-declaration]
  init_timer(ptimer);
  ^~~~~~~~~~
  _init_timer
In file included from /home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760/include/drv_types.h:32:0,
                 from /home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760/core/rtw_cmd.c:22:
/home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760/include/osdep_service.h: In function ‘thread_enter’:
/home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760/include/osdep_service.h:375:2: error: implicit declaration of function ‘allow_signal’; did you mean ‘do_signal’? [-Werror=implicit-function-declaration]
  allow_signal(SIGTERM);
  ^~~~~~~~~~~~
  do_signal
/home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760/include/osdep_service.h: In function ‘flush_signals_thread’:
/home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760/include/osdep_service.h:385:6: error: implicit declaration of function ‘signal_pending’; did you mean ‘timer_pending’? [-Werror=implicit-function-declaration]
  if (signal_pending(current))
      ^~~~~~~~~~~~~~
      timer_pending
/home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760/include/osdep_service.h:386:3: error: implicit declaration of function ‘flush_signals’; did you mean ‘do_signal’? [-Werror=implicit-function-declaration]
   flush_signals(current);
   ^~~~~~~~~~~~~
   do_signal
cc1: some warnings being treated as errors
scripts/Makefile.build:330: recipe for target '/home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760/core/rtw_cmd.o' failed
make[2]: *** [/home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760/core/rtw_cmd.o] Error 1
Makefile:1577: recipe for target '_module_/home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760' failed
make[1]: *** [_module_/home/luisito/Documents/RTL8821AU_Linux_v5.2.6_21981_COEX20170206-6760.20170407/driver/rtl8821AU_WiFi_linux_v5.2.6_21981.20170407_COEX20170206-6760] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-4.15.0-101-generic'
Makefile:1877: recipe for target 'modules' failed
make: *** [modules] Error 2
##################################################
Compile make driver error: 2
Please check error Mesg
##################################################

似乎该文件夹中不存在文件rtw_cmd.o，因此它也失败了。

- 那么任何人都可以修复Wi-Fi 2.4GHz 和 5GHz 两个文件夹中的文件rtw_cmd.o吗？

文件夹位于以下链接中：Linux 的双频 USB 适配器 Wifi

luisito_36

Asked: 2018-07-13 11:08:11 +0800 CST

如何在不重启的情况下通过 IDE 或 SATA 重置和检测插件 HDD/SSD？

2

所以，我在 CPU 中使用我全新的HARD DRIVE CADDY SATA III 。

当我将 HDD/SSD 物理安装在安装支架中时，我可以单击 Windows 7 的“设备管理器”中的“扫描硬件更改”来检测 HDD/SSD。现在，我怎样才能在 Ubuntu 18.04 中喜欢它？我的意思是如何在不重新启动 Ubuntu 的情况下检测 HDD/SSD？

我需要在 Ubuntu 的终端中输入三个问题：

我可以输入什么命令来通过 IDE 和 SATA 检测 HDD/SSD？
我可以键入什么命令通过 IDE 或 SATA 删除带有 HDD/SSD 的插件？
我可以通过 IDE 或 SATA 物理更改 HDD/SSD 没有任何问题的最佳方法是什么？

22.04 wine的xbox控制器出现错误，如何解决？

如何从 Ubuntu 20.04 中删除和清除 EasyScreenCast？

在 Ubuntu 18.04.4 上安装双频 USB 适配器 2.4/5GHz Wi-Fi 时出现问题

如何在不重启的情况下通过 IDE 或 SATA 重置和检测插件 HDD/SSD？

如何运行 .sh 脚本？

如何安装 .tar.gz（或 .tar.bz2）文件？

如何列出所有已安装的软件包

无法锁定管理目录 (/var/lib/dpkg/) 是另一个进程在使用它吗？

luisito_36's questions