主页 / user-466676

Arno's questions

Martin Hope
Arno
Asked: 2020-04-28 00:53:40 +0800 CST
  • 1

我需要缩放我的屏幕以在 12" 屏幕上读取 1920x1080 分辨率。为此，我发现这条线很棒：

xrandr --output eDP-1 --scale 0.9x0.9

我怎样才能在屏幕的原始设置中包含它，以便尽早？任何 X11 配置文件？在哪里以及如何？

谢谢！

我稍后添加它的问题是屏幕（intel skylake）在暂停或重新配置后开始闪烁。我提交了该错误（https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1872760）但对快速解决该问题的希望不大。

xorg display-resolution display
Martin Hope
Arno
Asked: 2020-02-15 08:17:54 +0800 CST
  • 1

我的笔记本电脑在 powertop（空闲选项卡）中显示 GPU 电源 100%。RC6或其他节能状态0%。我检查了我的旧笔记本电脑 - 那里不同。阅读它我发现了参数 enable_rc6。在我的旧笔记本电脑上它是“1” - 但在我的新笔记本电脑上根本不可用。（Core m5 Skylake，Ubuntu 18.04 Mate - 旧笔记本电脑相同的 Ubuntu，但 N3530）。

编辑：（
我重复测试安装 Linux Mint Mate 19.03 - 也是一个 Ubuntu 内核 - 使用初始内核 5.0 它正在工作。大部分时间都使用 Rc6。在更新到内核 5.3 后，这消失了。所以这似乎是一种回归新内核）。

:~$ modinfo -p i915
modeset:Use kernel modesetting [KMS] (0=disable, 1=on, -1=force vga console preference [default]) (int)
enable_dc:Enable power-saving display C-states. (-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6) (int)
enable_fbc:Enable frame buffer compression for power savings (default: -1 (use per-chip default)) (int)
lvds_channel_mode:Specify LVDS channel mode (0=probe BIOS [default], 1=single-channel, 2=dual-channel) (int)
panel_use_ssc:Use Spread Spectrum Clock with panels [LVDS/eDP] (default: auto from VBT) (int)
vbt_sdvo_panel_type:Override/Ignore selection of SDVO panel mode in the VBT (-2=ignore, -1=auto [default], index in VBT BIOS table) (int)
reset:Attempt GPU resets (0=disabled, 1=full gpu reset, 2=engine reset [default]) (int)
vbt_firmware:Load VBT from specified file under /lib/firmware (charp)
error_capture:Record the GPU state following a hang. This information in /sys/class/drm/card<N>/error is vital for triaging and debugging hangs. (bool)
enable_hangcheck:Periodically check GPU activity for detecting hangs. WARNING: Disabling this can cause system wide hangs. (default: true) (bool)
enable_psr:Enable PSR (0=disabled, 1=enabled) Default: -1 (use per-chip default) (int)
force_probe:Force probe the driver for specified devices. See CONFIG_DRM_I915_FORCE_PROBE for details. (charp)
alpha_support:Deprecated. See i915.force_probe. (bool)
disable_power_well:Disable display power wells when possible (-1=auto [default], 0=power wells always on, 1=power wells disabled when possible) (int)
enable_ips:Enable IPS (default: true) (int)
fastboot:Try to skip unnecessary mode sets at boot time (0=disabled, 1=enabled) Default: -1 (use per-chip default) (int)
prefault_disable:Disable page prefaulting for pread/pwrite/reloc (default:false). For developers only. (bool)
load_detect_test:Force-enable the VGA load detect code for testing (default:false). For developers only. (bool)
force_reset_modeset_test:Force a modeset during gpu reset for testing (default:false). For developers only. (bool)
invert_brightness:Invert backlight brightness (-1 force normal, 0 machine defaults, 1 force inversion), please report PCI device ID, subsystem vendor and subsystem device ID to [email protected], if your machine needs it. It will then be included in an upcoming module version. (int)
disable_display:Disable display (default: false) (bool)
mmio_debug:Enable the MMIO debug code for the first N failures (default: off). This may negatively affect performance. (int)
verbose_state_checks:Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions. (bool)
nuclear_pageflip:Force enable atomic functionality on platforms that don't have full support yet. (bool)
edp_vswing:Ignore/Override vswing pre-emph table selection from VBT (0=use value from vbt [default], 1=low power swing(200mV),2=default swing(400mV)) (int)
enable_guc:Enable GuC load for GuC submission and/or HuC load. Required functionality can be selected using bitmask values. (-1=auto, 0=disable [default], 1=GuC submission, 2=HuC load) (int)
guc_log_level:GuC firmware logging level. Requires GuC to be loaded. (-1=auto [default], 0=disable, 1..4=enable with verbosity min..max) (int)
guc_firmware_path:GuC firmware path to use instead of the default one (charp)
huc_firmware_path:HuC firmware path to use instead of the default one (charp)
dmc_firmware_path:DMC firmware path to use instead of the default one (charp)
enable_dp_mst:Enable multi-stream transport (MST) for new DisplayPort sinks. (default: true) (bool)
enable_dpcd_backlight:Enable support for DPCD backlight control (default:false) (bool)
enable_gvt:Enable support for Intel GVT-g graphics virtualization host support(default:false) (bool)
gpu powertop