我正在尝试让 Native Instruments KOMPLETE Audio 1 在内核为 5.4.0-52-generic 的 Ubuntu 18.04.5 LTS 中工作。
这是一个普通的 USB2 音频接口，我将它连接到 USB3 端口。除了鼠标和键盘，没有其他任何东西连接到任何其他 USB3 端口。根据 USB3 测试仪，它在大约 450 mA 时使用 5.1 V。
虽然我之前在 Arch Linux 上使用过它，但 Ubuntu 一直在禁用该设备。为了再次使用它，我需要将其拔出并插入另一个 USB 端口。然后它会再次工作一分钟左右，直到 Ubuntu 再次禁用它。Ubuntu 有时会降低带宽并重启设备。
来自 dmesg 的片段：
[ 2504.565959] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 2504.810303] usb 1-2: New USB device found, idVendor=17cc, idProduct=1830, bcdDevice= 0.13
[ 2504.810306] usb 1-2: New USB device strings: Mfr=1, Product=4, SerialNumber=2
[ 2504.810308] usb 1-2: Product: Komplete Audio 1
[ 2504.810309] usb 1-2: Manufacturer: Native Instruments
[ 2504.810310] usb 1-2: SerialNumber: 00001A23
[ 2504.850627] mc: Linux media interface: v0.10
[ 2507.443820] usbcore: registered new interface driver snd-usb-audio
[ 2508.820927] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 2 ep 4 on endpoint
[ 2508.820930] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 2 ep 4 on endpoint
[ 2508.820931] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 2 ep 4 on endpoint
[ 2508.820933] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 2 ep 4 on endpoint
[ 2508.820934] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 2 ep 4 on endpoint
[ 2508.820935] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 2 ep 4 on endpoint
[ 2508.821310] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 2 ep 4 on endpoint
[ 2508.821643] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 2 ep 4 on endpoint
[ 2529.801389] usb 1-2: USB disconnect, device number 3
[ 2530.122630] usb 1-2: new high-speed USB device number 4 using xhci_hcd
[ 2530.367602] usb 1-2: New USB device found, idVendor=17cc, idProduct=1830, bcdDevice= 0.13
[ 2530.367604] usb 1-2: New USB device strings: Mfr=1, Product=4, SerialNumber=2
[ 2530.367606] usb 1-2: Product: Komplete Audio 1
[ 2530.367607] usb 1-2: Manufacturer: Native Instruments
[ 2530.367609] usb 1-2: SerialNumber: 00001A23
[ 2533.961277] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 3 ep 4 on endpoint
[ 2533.961280] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 3 ep 4 on endpoint
[ 2533.961282] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 3 ep 4 on endpoint
[ 2533.961283] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 3 ep 4 on endpoint
[ 2533.961688] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 3 ep 4 on endpoint
[ 2533.961689] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 3 ep 4 on endpoint
[ 2533.961691] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 3 ep 4 on endpoint
[ 2533.962137] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 3 ep 4 on endpoint
[ 2538.107982] xhci_hcd 0000:01:00.0: ERROR unknown event type 37
[ 2538.841453] perf: interrupt took too long (2999 > 2500), lowering kernel.perf_event_max_sample_rate to 66500
[ 2554.539607] usb 1-2: USB disconnect, device number 4
[ 2554.827290] usb 1-2: new high-speed USB device number 5 using xhci_hcd
[ 2555.451571] usb 1-2: device descriptor read/64, error -71
[ 2555.788305] usb 1-2: device descriptor read/all, error -71
[ 2556.135325] usb 1-2: new high-speed USB device number 6 using xhci_hcd
[ 2556.591939] usb 1-2: New USB device found, idVendor=17cc, idProduct=1830, bcdDevice= 0.13
[ 2556.591942] usb 1-2: New USB device strings: Mfr=1, Product=4, SerialNumber=2
[ 2556.591943] usb 1-2: Product: Komplete Audio 1
[ 2556.591944] usb 1-2: Manufacturer: Native Instruments
[ 2556.591945] usb 1-2: SerialNumber: 00001A23
[ 2556.664311] usb 1-2: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71)
[ 2556.700404] usb 1-2: cannot get ctl value: req = 0x83, wValue = 0x201, wIndex = 0xa00, type = 4
[ 2556.700408] usb 1-2: 10:0: cannot get min/max values for control 2 (id 10)
[ 2556.709288] usb 1-2: cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0xa00, type = 4
[ 2556.709291] usb 1-2: 10:0: cannot get min/max values for control 2 (id 10)
[ 2556.718289] usb 1-2: cannot get ctl value: req = 0x83, wValue = 0x201, wIndex = 0xb00, type = 4
[ 2556.718292] usb 1-2: 11:0: cannot get min/max values for control 2 (id 11)
[ 2556.721326] usb 1-2: cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0xb00, type = 4
[ 2556.721329] usb 1-2: 11:0: cannot get min/max values for control 2 (id 11)
[ 2556.740712] usb 1-2: USB disconnect, device number 6
[ 2557.019351] usb 1-2: new high-speed USB device number 7 using xhci_hcd
[ 2557.367593] usb 1-2: device descriptor read/64, error -71
[ 2557.891600] usb 1-2: device descriptor read/64, error -71
[ 2558.547421] usb 1-2: new high-speed USB device number 8 using xhci_hcd
[ 2558.724217] usb 1-2: New USB device found, idVendor=17cc, idProduct=1830, bcdDevice= 0.13
[ 2558.724220] usb 1-2: New USB device strings: Mfr=1, Product=4, SerialNumber=2
[ 2558.724221] usb 1-2: Product: Komplete Audio 1
[ 2558.724223] usb 1-2: Manufacturer: Native Instruments
[ 2558.724224] usb 1-2: SerialNumber: 00001A23
[ 2560.578047] usb 1-2: 1:1: cannot set freq 192000 (v2/v3): err -71
[ 2560.587795] usb 1-2: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71)
[ 2560.623776] usb 1-2: cannot get ctl value: req = 0x83, wValue = 0x201, wIndex = 0xa00, type = 4
[ 2560.623779] usb 1-2: 10:0: cannot get min/max values for control 2 (id 10)
[ 2560.632808] usb 1-2: cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0xa00, type = 4
[ 2560.632811] usb 1-2: 10:0: cannot get min/max values for control 2 (id 10)
[ 2560.641742] usb 1-2: cannot get ctl value: req = 0x83, wValue = 0x201, wIndex = 0xb00, type = 4
[ 2560.641745] usb 1-2: 11:0: cannot get min/max values for control 2 (id 11)
[ 2560.644879] usb 1-2: cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0xb00, type = 4
[ 2560.644882] usb 1-2: 11:0: cannot get min/max values for control 2 (id 11)
[ 2560.664015] usb 1-2: USB disconnect, device number 8
[ 2560.935603] usb 1-2: new high-speed USB device number 9 using xhci_hcd
[ 2561.112468] usb 1-2: New USB device found, idVendor=17cc, idProduct=1830, bcdDevice= 0.13
[ 2561.112470] usb 1-2: New USB device strings: Mfr=1, Product=4, SerialNumber=2
[ 2561.112471] usb 1-2: Product: Komplete Audio 1
[ 2561.112472] usb 1-2: Manufacturer: Native Instruments
[ 2561.112473] usb 1-2: SerialNumber: 00001A23
[ 2563.741297] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 8 ep 4 on endpoint
[ 2563.741301] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 8 ep 4 on endpoint
[ 2563.741302] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 8 ep 4 on endpoint
[ 2563.741304] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 8 ep 4 on endpoint
[ 2563.741706] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 8 ep 4 on endpoint
[ 2563.741708] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 8 ep 4 on endpoint
[ 2563.741709] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 8 ep 4 on endpoint
[ 2563.741752] retire_capture_urb: 44 callbacks suppressed
[ 2563.742089] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 8 ep 4 on endpoint
[ 2563.830877] usb 1-2: USB disconnect, device number 9
[ 2563.830994] usb 1-2: cannot submit urb (err = -19)
[ 2563.831731] usb 1-2: cannot submit urb (err = -19)
[ 2564.127567] usb 1-2: new high-speed USB device number 10 using xhci_hcd
[ 2564.371985] usb 1-2: New USB device found, idVendor=17cc, idProduct=1830, bcdDevice= 0.13
[ 2564.371988] usb 1-2: New USB device strings: Mfr=1, Product=4, SerialNumber=2
[ 2564.371989] usb 1-2: Product: Komplete Audio 1
[ 2564.371991] usb 1-2: Manufacturer: Native Instruments
[ 2564.371992] usb 1-2: SerialNumber: 00001A23
[ 2567.962866] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 9 ep 4 on endpoint
[ 2567.962869] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 9 ep 4 on endpoint
[ 2567.963295] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 9 ep 4 on endpoint
[ 2567.963297] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 9 ep 4 on endpoint
[ 2567.963298] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 9 ep 4 on endpoint
[ 2567.963299] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 9 ep 4 on endpoint
[ 2567.963300] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 9 ep 4 on endpoint
[ 2567.963832] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 9 ep 4 on endpoint
[ 2572.345491] xhci_hcd 0000:01:00.0: ERROR unknown event type 37
[ 2572.348412] retire_capture_urb: 284 callbacks suppressed
[ 2575.061363] usb 1-2: USB disconnect, device number 10
[ 2575.347837] usb 1-2: new high-speed USB device number 11 using xhci_hcd
[ 2575.592653] usb 1-2: New USB device found, idVendor=17cc, idProduct=1830, bcdDevice= 0.13
[ 2575.592656] usb 1-2: New USB device strings: Mfr=1, Product=4, SerialNumber=2
[ 2575.592658] usb 1-2: Product: Komplete Audio 1
[ 2575.592659] usb 1-2: Manufacturer: Native Instruments
[ 2575.592661] usb 1-2: SerialNumber: 00001A23
[ 2576.652758] usb 1-2: 1:1: cannot set freq 192000 (v2/v3): err -71
[ 2576.661794] usb 1-2: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71)
[ 2576.697773] usb 1-2: cannot get ctl value: req = 0x83, wValue = 0x201, wIndex = 0xa00, type = 4
[ 2576.697777] usb 1-2: 10:0: cannot get min/max values for control 2 (id 10)
[ 2576.706783] usb 1-2: cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0xa00, type = 4
[ 2576.706786] usb 1-2: 10:0: cannot get min/max values for control 2 (id 10)
[ 2576.715769] usb 1-2: cannot get ctl value: req = 0x83, wValue = 0x201, wIndex = 0xb00, type = 4
[ 2576.715772] usb 1-2: 11:0: cannot get min/max values for control 2 (id 11)
[ 2576.718730] usb 1-2: cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0xb00, type = 4
[ 2576.718733] usb 1-2: 11:0: cannot get min/max values for control 2 (id 11)
[ 2576.737076] usb 1-2: USB disconnect, device number 11
[ 2578.133138] usb 1-2: new high-speed USB device number 12 using xhci_hcd
[ 2578.264660] usb 1-2: Device not responding to setup address.
[ 2578.472550] usb 1-2: Device not responding to setup address.
[ 2578.683917] usb 1-2: device not accepting address 12, error -71
[ 2579.020038] usb 1-2: new high-speed USB device number 13 using xhci_hcd
[ 2579.196963] usb 1-2: New USB device found, idVendor=17cc, idProduct=1830, bcdDevice= 0.13
[ 2579.196965] usb 1-2: New USB device strings: Mfr=1, Product=4, SerialNumber=2
[ 2579.196967] usb 1-2: Product: Komplete Audio 1
[ 2579.196969] usb 1-2: Manufacturer: Native Instruments
[ 2579.196970] usb 1-2: SerialNumber: 00001A23
[ 2579.742192] usb 1-2: parse_audio_format_rates_v2v3(): unable to find clock source (clock -71)
[ 2579.778179] usb 1-2: cannot get ctl value: req = 0x83, wValue = 0x201, wIndex = 0xa00, type = 4
[ 2579.778183] usb 1-2: 10:0: cannot get min/max values for control 2 (id 10)
[ 2579.787165] usb 1-2: cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0xa00, type = 4
[ 2579.787168] usb 1-2: 10:0: cannot get min/max values for control 2 (id 10)
[ 2579.796145] usb 1-2: cannot get ctl value: req = 0x83, wValue = 0x201, wIndex = 0xb00, type = 4
[ 2579.796148] usb 1-2: 11:0: cannot get min/max values for control 2 (id 11)
[ 2579.799118] usb 1-2: cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0xb00, type = 4
[ 2579.799120] usb 1-2: 11:0: cannot get min/max values for control 2 (id 11)
[ 2579.817374] usb 1-2: USB disconnect, device number 13
[ 2580.095986] usb 1-2: new high-speed USB device number 14 using xhci_hcd
[ 2580.308198] usb 1-2: device descriptor read/64, error -71
[ 2580.664974] usb 1-2: New USB device found, idVendor=17cc, idProduct=1830, bcdDevice= 0.13
[ 2580.664977] usb 1-2: New USB device strings: Mfr=1, Product=4, SerialNumber=2
[ 2580.664978] usb 1-2: Product: Komplete Audio 1
[ 2580.664980] usb 1-2: Manufacturer: Native Instruments
[ 2580.664981] usb 1-2: SerialNumber: 00001A23
[ 2583.303797] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 15 ep 4 on endpoint
[ 2583.303799] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 15 ep 4 on endpoint
[ 2583.304233] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 15 ep 4 on endpoint
[ 2583.304234] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 15 ep 4 on endpoint
[ 2583.304235] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 15 ep 4 on endpoint
[ 2583.304236] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 15 ep 4 on endpoint
[ 2583.304237] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 15 ep 4 on endpoint
[ 2583.304294] retire_capture_urb: 43 callbacks suppressed
[ 2583.304720] xhci_hcd 0000:01:00.0: WARN: buffer overrun event for slot 15 ep 4 on endpoint
[ 2584.046654] xhci_hcd 0000:01:00.0: ERROR unknown event type 37
[ 2589.284242] usb 1-2: timeout: still 4 active urbs on EP #81
[ 2590.292245] usb 1-2: timeout: still 12 active urbs on EP #1
[ 2591.292291] usb 1-2: timeout: still 4 active urbs on EP #81
[ 2592.292285] usb 1-2: timeout: still 12 active urbs on EP #1
[ 2593.508499] xhci_hcd 0000:01:00.0: xHCI host not responding to stop endpoint command.
[ 2593.508669] xhci_hcd 0000:01:00.0: xHCI host controller not responding, assume dead
[ 2593.508696] xhci_hcd 0000:01:00.0: HC died; cleaning up
[ 2593.508709] xhci_hcd 0000:01:00.0: xHCI host not responding to stop endpoint command.
[ 2593.508894] usb 1-2: Not enough bandwidth for altsetting 0
[ 2593.508925] usb 1-2: USB disconnect, device number 14
[ 2593.510039] usb 1-9: USB disconnect, device number 2
我尝试过更新系统包，重新启动 PC，通过内核标志禁用 IOMMU 来启动它，但这些都没有任何帮助。
是否有其他的魔法标志可以解决这个问题？
可能出了什么问题，我该如何解决这个问题？