主页 / ubuntu / 问题

问题[hp-pavilion](ubuntu)

Martin Hope
iGeeks
Asked: 2020-10-16 05:51:34 +0800 CST
  • 0

[已解决] 我想在我的 HP Pavilion x360 可转换 14-dw0997nz 上安装 Ubuntu。不幸的是，它不能从 USB 启动（同样的棒在其他笔记本电脑上也可以使用）。

许多教程提到启用“旧版启动”。但是这个选项在新的bios中不可用？？？见图片。遗产 ？？

任何想法如何在新的 HP Pavilion 上安装 Ubuntu？

提前致谢。

boot usb hp-pavilion
Martin Hope
secondstriker
Asked: 2018-12-31 00:10:13 +0800 CST
  • 0

我的笔记本电脑风扇很烦人。它旋转 5 秒，然后停止 2 秒，然后旋转，然后反复停止。它总是让我烦恼。我使用传感器包来检查发生这种情况的时间。我意识到当 cpu 温度低时，例如 50 到 55 度，它就会发生。我的意思是当 cpu 正在处理繁重的进程时，风扇正在不停地工作。完全没有过热问题。所以你遇到了问题。

在 bois 中，只有“风扇始终工作”，风扇控制是或否选项。bois 中没有关于风扇的其他选项或信息。将选项更改为是或否对我的问题没有影响。

这是sensors-detect的输出

# sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)
# System: Hewlett-Packard HP Pavilion g6 Notebook PC [0696120000204210000610100] (laptop)
# Board: Hewlett-Packard 1670
# Kernel: 4.15.0-43-generic x86_64
# Processor: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (6/42/7)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
AMD Family 12h and 14h thermal sensors...                   No
AMD Family 15h thermal sensors...                           No
AMD Family 16h thermal sensors...                           No
AMD Family 15h power sensors...                             No
AMD Family 16h power sensors...                             No
Intel digital thermal sensor...                             Success!
    (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                         No
Intel 5500/5520/X58 thermal sensor...                       No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): y
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): y
Using driver `i2c-i801' for device 0000:00:1f.3: Intel Cougar Point (PCH)

Next adapter: SMBus I801 adapter at 4040 (i2c-0)
Do you want to scan it? (YES/no/selectively): y
Client found at address 0x50
Handled by driver `eeprom' (already loaded), chip type `eeprom'
    (note: this is probably NOT a sensor chip!)
Client found at address 0x52
Handled by driver `eeprom' (already loaded), chip type `eeprom'
    (note: this is probably NOT a sensor chip!)

Next adapter: i915 gmbus ssc (i2c-1)
Do you want to scan it? (yes/NO/selectively): y

Next adapter: i915 gmbus vga (i2c-2)
Do you want to scan it? (yes/NO/selectively): y

Next adapter: i915 gmbus panel (i2c-3)
Do you want to scan it? (yes/NO/selectively): y
Client found at address 0x28
Probing for `National Semiconductor LM78'...                No
Probing for `National Semiconductor LM79'...                No
Probing for `National Semiconductor LM80'...                No
Probing for `National Semiconductor LM96080'...             No
Probing for `Winbond W83781D'...                            No
Probing for `Winbond W83782D'...                            No
Probing for `Nuvoton NCT7802Y'...                           No
Probing for `Winbond W83627HF'...                           No
Probing for `Winbond W83627EHF'...                          No
Probing for `Winbond W83627DHG/W83667HG/W83677HG'...        No
Probing for `Asus AS99127F (rev.1)'...                      No
Probing for `Asus AS99127F (rev.2)'...                      No
Probing for `Asus ASB100 Bach'...                           No
Probing for `Analog Devices ADM1029'...                     No
Probing for `ITE IT8712F'...                                No

Next adapter: i915 gmbus dpc (i2c-4)
Do you want to scan it? (yes/NO/selectively): y

Next adapter: i915 gmbus dpb (i2c-5)
Do you want to scan it? (yes/NO/selectively): y

Next adapter: i915 gmbus dpd (i2c-6)
Do you want to scan it? (yes/NO/selectively): y

Next adapter: DPDDC-B (i2c-7)
Do you want to scan it? (yes/NO/selectively): y


Now follows a summary of the probes I have just done.
Just press ENTER to continue: y

Driver `coretemp':
  * Chip `Intel digital thermal sensor' (confidence: 9)

To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
coretemp
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!

Do you want to add these lines automatically to /etc/modules? (yes/NO)y
Successful!

Monitoring programs won't work until the needed modules are
loaded. You may want to run '/etc/init.d/kmod start'
to load them.

Unloading cpuid... OK

所以朋友，你有什么解决这个问题的建议？

fan fancontrol hp-pavilion noise lm-sensors
Martin Hope
Kyamasam
Asked: 2018-10-19 04:19:32 +0800 CST
  • 3

我尝试在 HP Pavilion Power 15 笔记本电脑上安装 Ubuntu。我之前在 SSD 上安装了 Windows，安装在选择语言或之后的屏幕时冻结。我似乎无法用论坛上的其他解决方案解决问题。笔记本电脑还具有以下规格：

  • 128 Gb 固态硬盘
  • 1TB 硬盘
  • 英伟达 GTX1050 显卡。

我想在 SSD 驱动器上安装 Ubuntu。

hp-pavilion hp 18.04
Martin Hope
RolandiXor
Asked: 2010-11-15 10:51:43 +0800 CST
  • 1

我想在我的系统上启用混合挂起。有人可以指出正确的信息吗？另外，我读过一些关于它不起作用的东西，但这是真的吗？或者只是一个系统问题？感谢您提供任何信息。

suspend hp-pavilion
Martin Hope
A.B.
Asked: 2010-10-21 00:49:57 +0800 CST
  • 1

我在 HP tx2675ee 平板电脑（tx2500 系列 - 单点触控而非多点触控）上安装了 Kubuntu 10.10。触摸屏和手写笔都是开箱即用的，但是触摸屏在校准方面还远远不够，而且手写笔有点不正常。

如何校准这些输入法？

这里和其他地方都有帖子提到编辑此路径：
/usr/lib/X11/xorg.conf.d/10-wacom.conf，但在 Kubuntu 10.10 上我找不到该文件或其父目录。

谢谢。

10.10 configuration xorg resolution hp-pavilion
Martin Hope
Grayson
Asked: 2010-10-13 11:01:11 +0800 CST
  • 8

在 Ubuntu 10.04 中一切正常，事实上完美无缺，我钦佩操作系统如此出色地处理如此独特的触摸板的方式。我有一台 HP Pavilion dv6。

触控板和左、中、右键都在触控板上，每一种点击都在底部按下相应的点击按钮。

在 10.04 中，一切正常，升级到 Ubuntu 10.10 后，事情变得……奇怪。侧面的滚动会起作用，左键单击也会起作用。但是，右键单击不起作用，但是如果您轻轻点击触摸板的右角，则会出现右键单击菜单，尽管它不一致且很难做到。

我已经应用了我在较旧的 Ubuntu 论坛上找到的类似问题的修复程序，它恢复了正常的左右单击，但它不是那么流畅，而且没有垂直滚动功能，我更喜欢具有...

我只是希望事情保持原样，如果可能的话，请告诉我该怎么做。

谢谢你。

10.10 hardware hp-pavilion touchpad
Martin Hope
Pawan
Asked: 2010-09-07 21:27:33 +0800 CST
  • 4

我一直在使用安装了 Ubuntu 10.04 的 HP Pavillion dv4-1430us 笔记本电脑。我想在我的 Ubuntu 上使用笔记本电脑附带的 IR6 遥控器。但是，经过几次尝试，我都没有这样做。

任何人都可以让我知道在 Ubuntu 10.04 中远程工作的完整和详细的程序吗？

10.04 hardware hp-pavilion lirc peripherals