我已经按照这里的描述配置了我的 DC（域控制器；Windows 2016），以便从我的 Sophos-UTM 获得时间。所以我按照那里的描述配置了 GPO。但在那之后并重新启动服务器，我注意到当我运行w32tm /query /status源下的命令时列出了本地 CMOS 时钟，但是这里应该列出我的 Sophos-UTM 的 IP 还是我错了？在我上面链接的屏幕截图中，当它的作者运行相同的命令时，列出了他的配置中的正确 ip。那么这里出了什么问题？
所有需要的端口 (UDP 123) 都是开放且可访问的。我已经对其进行了测试并查看了我的防火墙配置。出于测试目的，我在 DC 上运行此命令：w32tm /stripchart /computer:IP-OF-SOPHOS-UTM /dataonly /samples:5
使用该命令，我从 Sophos-UTM 获得了 5 个时间戳样本，因此我的防火墙规则正在工作并且那里的配置是正确的。我在日志中也看到了这一点。
此 DC 是一个虚拟机，在 vSphere ESXi（免费版本 7.0.1）中运行。ESXi-Host 和 Guest 之间的时间同步已禁用，如官方 vmWare 文档中所述。
这是命令的输出w32tm /query /status
Jump indicator: 0 (no warning)
stratum: 1 (primary reference - synchron. via radio clock)
Precision: -6 (15.625ms per tick)
stem delay: 0.0000000s
stem deviation: 10.0000000s
Reference ID: 0x4C4F434C (source name: "LOCL")
Last successful synchronization time: 07.12.2020 15:04:23
Source: Local CMOS Clock
Polling interval: 6 (64s)
命令的输出w32tm /query /configuration
[Configuration]
EventLogFlags: 2 (Lokal)
AnnounceFlags: 10 (Lokal)
TimeJumpAuditOffset: 28800 (Lokal)
MinPollInterval: 6 (Lokal)
MaxPollInterval: 10 (Lokal)
MaxNegPhaseCorrection: 172800 (Lokal)
MaxPosPhaseCorrection: 172800 (Lokal)
MaxAllowedPhaseOffset: 300 (Lokal)
FrequencyCorrectRate: 4 (Lokal)
PollAdjustFactor: 5 (Lokal)
LargePhaseOffset: 50000000 (Lokal)
SpikeWatchPeriod: 900 (Lokal)
LocalClockDispersion: 10 (Lokal)
HoldPeriod: 5 (Lokal)
PhaseCorrectRate: 7 (Lokal)
UpdateInterval: 100 (Lokal)
[Time-Provider]
NtpClient (Lokal)
DllName: C:\Windows\SYSTEM32\w32time.DLL (Lokal)
Enabled: 1 (Lokal)
InputProvider: 1 (Lokal)
AllowNonstandardModeCombinations: 1 (Lokal)
ResolvePeerBackoffMinutes: 15 (Richtlinie)
ResolvePeerBackoffMaxTimes: 7 (Richtlinie)
CompatibilityFlags: 2147483648 (Lokal)
EventLogFlags: 0 (Richtlinie)
LargeSampleSkew: 3 (Lokal)
SpecialPollInterval: 900 (Richtlinie)
Type: NTP (Richtlinie)
NtpServer: MY-SOPHOS-UTM-IP,0x5 (Richtlinie)
NtpServer (Lokal)
DllName: C:\Windows\SYSTEM32\w32time.DLL (Lokal)
Enabled: 1 (Lokal)
InputProvider: 0 (Lokal)
AllowNonstandardModeCombinations: 1 (Lokal)
VMICTimeProvider (Lokal)
DllName: C:\Windows\System32\vmictimeprovider.dll (Lokal)
Enabled: 1 (Lokal)
InputProvider: 1 (Lokal)
命令的输出w32tm /query /peers
Number Peers: 1
Peer: MY-SOPHOS-UTM-IP,0x5
Status: Active
Time remaining: 495.5965885s
Mode: 1 (Symmetrically active)
Stratum: 0 (not specified)
Peer Retrieval Interval: 0 (not specified)
Host polling interval: 4 (16s)
命令的输出w32tm /resync /rediscover
Resynchronize command is sent to the local computer.
The computer was not synchronized because no time data was available.
非常奇怪的行为。哪位大神，有解决办法吗？
