主页 / user-343500

filo's questions

Martin Hope
filo
Asked: 2024-04-19 23:41:16 +0800 CST
  • 6

我有一个 LXC 容器。我想通过tap0与主机不同的接口 ( ) 路由其所有流量。

主机接口：

  • tap0172.13.0.3，网关172.13.0.1
  • lxcbr0192.168.12.104 与容器的veth成员

容器中有一个eth0192.168.12.105，默认路由为 192.168.12.104。我当然可以从容器 ping 主机，反之亦然。

容器路由表很简单：

# ip route show
default via 192.168.12.104 dev eth0 
192.168.12.0/24 dev eth0 proto kernel scope link src 192.168.12.105

我在主机上制作了一个单独的路由表：

# ip rule add from all fwmark 1234 table 1234
# ip route show table 1234
default via 172.30.0.1 dev tap0

主机主路由表（同样，没什么特别的）：

# ip route show
default via 192.168.xxx.xxx dev eth0 proto dhcp src 192.168.xxx.xxx metric 2004 mtu 1500 
172.30.0.0/16 dev tap0 proto kernel scope link src 172.30.0.3 
192.168.xxx.0/24 dev eth0 proto dhcp scope link src 192.168.xxx.xxx metric 2004 mtu 1500 
192.168.12.0/24 dev lxcbr0 proto kernel scope link src 192.168.12.104

我这样配置 iptables：

iptables -t nat -A POSTROUTING -o tap0 -j MASQUERADE
iptables -t nat -A PREROUTING -i lxcbr0 -j MARK --set-mark 1234

现在，我尝试从容器 ping 8.8.8.8，但每隔一秒 ping 就会丢失。可靠。

# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=109 time=48.9 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=109 time=47.1 ms
64 bytes from 8.8.8.8: icmp_seq=5 ttl=109 time=47.0 ms
64 bytes from 8.8.8.8: icmp_seq=7 ttl=109 time=46.9 ms
64 bytes from 8.8.8.8: icmp_seq=9 ttl=109 time=47.1 ms
64 bytes from 8.8.8.8: icmp_seq=11 ttl=109 time=47.3 ms
64 bytes from 8.8.8.8: icmp_seq=13 ttl=109 time=47.1 ms
64 bytes from 8.8.8.8: icmp_seq=15 ttl=109 time=47.0 ms

桥上交通：

# tcpdump -i lxcbr0 -n
listening on lxcbr0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
10:04:46.208273 IP 192.168.12.105 > 8.8.8.8: ICMP echo request, id 138, seq 1, length 64
10:04:46.257177 IP 8.8.8.8 > 192.168.12.105: ICMP echo reply, id 138, seq 1, length 64
10:04:47.209372 IP 192.168.12.105 > 8.8.8.8: ICMP echo request, id 138, seq 2, length 64
10:04:48.236402 IP 192.168.12.105 > 8.8.8.8: ICMP echo request, id 138, seq 3, length 64
10:04:48.283429 IP 8.8.8.8 > 192.168.12.105: ICMP echo reply, id 138, seq 3, length 64
10:04:49.237599 IP 192.168.12.105 > 8.8.8.8: ICMP echo request, id 138, seq 4, length 64
10:04:50.252397 IP 192.168.12.105 > 8.8.8.8: ICMP echo request, id 138, seq 5, length 64
10:04:50.299356 IP 8.8.8.8 > 192.168.12.105: ICMP echo reply, id 138, seq 5, length 64
10:04:51.253520 IP 192.168.12.105 > 8.8.8.8: ICMP echo request, id 138, seq 6, length 64
10:04:52.268435 IP 192.168.12.105 > 8.8.8.8: ICMP echo request, id 138, seq 7, length 64
10:04:52.315270 IP 8.8.8.8 > 192.168.12.105: ICMP echo reply, id 138, seq 7, length 64
10:04:53.270429 IP 192.168.12.105 > 8.8.8.8: ICMP echo request, id 138, seq 8, length 64
10:04:54.284396 IP 192.168.12.105 > 8.8.8.8: ICMP echo request, id 138, seq 9, length 64
10:04:54.331473 IP 8.8.8.8 > 192.168.12.105: ICMP echo reply, id 138, seq 9, length 64

流量来自tap0：

# tcpdump -i tap0 -n
listening on tap0, link-type EN10MB (Ethernet), snapshot length 262144 bytes
10:04:46.208342 IP 172.30.0.3 > 8.8.8.8: ICMP echo request, id 138, seq 1, length 64
10:04:46.257147 IP 8.8.8.8 > 172.30.0.3: ICMP echo reply, id 138, seq 1, length 64
10:04:48.236458 IP 172.30.0.3 > 8.8.8.8: ICMP echo request, id 138, seq 3, length 64
10:04:48.283402 IP 8.8.8.8 > 172.30.0.3: ICMP echo reply, id 138, seq 3, length 64
10:04:50.252446 IP 172.30.0.3 > 8.8.8.8: ICMP echo request, id 138, seq 5, length 64
10:04:50.299328 IP 8.8.8.8 > 172.30.0.3: ICMP echo reply, id 138, seq 5, length 64
10:04:52.268485 IP 172.30.0.3 > 8.8.8.8: ICMP echo request, id 138, seq 7, length 64
10:04:52.315242 IP 8.8.8.8 > 172.30.0.3: ICMP echo reply, id 138, seq 7, length 64
10:04:54.284445 IP 172.30.0.3 > 8.8.8.8: ICMP echo request, id 138, seq 9, length 64
10:04:54.331445 IP 8.8.8.8 > 172.30.0.3: ICMP echo reply, id 138, seq 9, length 64
10:04:56.300446 IP 172.30.0.3 > 8.8.8.8: ICMP echo request, id 138, seq 11, length 64
10:04:56.347598 IP 8.8.8.8 > 172.30.0.3: ICMP echo reply, id 138, seq 11, length 64

每当有传出 ping 时，tap0总会有响应（因此后面的一切tap0都正常）。 主机似乎正在丢弃来自容器的传出流量。我该如何调试这种情况？

iptables
Martin Hope
filo
Asked: 2017-11-07 05:18:55 +0800 CST
  • 2

我有一个带有几个远程应用程序的 Windows 服务器。当用户从其客户端启动远程应用程序时，每个应用程序都在单独的 RDP 会话中执行。我主要关心登录时间。远程应用程序是否可以共享单个 RDP 会话（以便进一步的应用程序登录更快），或者这是一个基本限制？

windows-server-2012-r2