主页 / user-266374

Neil Townsend's questions

Martin Hope
Neil Townsend
Asked: 2015-04-09 00:34:20 +0800 CST
  • 2

我最近购买了一个 SPA232D 来将一些 VoIP 集成到使用星号的系统中。显然，它需要为英国（不同于美国、澳大利亚、其他欧洲等）电信公司进行配置。SPA3102 有一些提示，但这个有不同的菜单设置和一些不同的选项。

但是，来电（PSTN 到 SPA 到星号到手机）不会从 SPA232 路由到星号。从手机到星号到 SPA232 到 PSTN 的去电工作正常。使用此处和其他地方的信息，我设置了：

本地化设置：

Network Setup > Time Settings
    Time Zone: GMT (England)
Voice > Regional > Call Progress Tones
    Dial tone: 350@-19,440@-22;10(*/0/1+2) 
    Ring back: 400@-20,450@-20;*(.4/.2/1+2,.4/2/1+2) 
    Busy tone: 400@-20;10(.375/.375/1) 
    Reorder tone: 400@-20;10(*/0/1) 
    SIT 1 tone: 950@-16,1400@-16,1800@-16;20(.330/0/1,.330/0/2,.330/0/3,0/1/0) 
    MWI dial tone: 350@-19,440@-22;10(.75/.75/1+2) 
Voice > Regional > Distinctive Call Waiting Tone Patterns
    CWT1 cadence: 30(.1/2) 
    CWT2 cadence: 30(.25/.25,.25/.25,.25/5) 
    CWT frequency: 400@-10
Voice > Regional > Distinctive Ring Patterns
    Ring 1 cadence: 60(.4/.2,.4/2) 
    Ring 2 cadence: 60(1/2) 
    Ring 3 cadence: 60(.25/.25,.25/.25,.25/1.75) 
    Ring 4 cadence: 60(.4/.8) 
    Ring 5 cadence: 60(2/4)
Voice > Regional > Miscellaneous
    FXS Port Impedance: 370+620||310nF (or 270+750||150nF ) 
    Caller ID Method: ETSI FSK With PR(UK)
Voice > PSTN > PSTN Disconnect Detection
    Detect CPC: yes 
    Detect Polarity Reversal: no 
    Detect PSTN Long Silence: no 
    PSTN Long Silence Duration: 30 
    PSTN Silence Threshold - High 
    Min CPC Duration: 0.09 
    Detect Disconnect Tone: yes 
    Disconnect Tone - 400@-30,400@-30; 2(3/0/1+2)
Voice > PSTN > International Settings
    Ring Validation Time: 256ms 
    Ring Indication Delay: 512ms 
    Ring Timeout: 640ms

我还设置了：

Voice > PSTN > International Settings
    FXO Country settings: UK

我无法设置，因为它不在菜单中（我设置为桥梁）：

SPA3102 > Advanced > Voice > Regional
    Daylight Saving Rule: start=3/-1/7/1:0:0;end=10/-1/7/2:0:0;save=1:0:0
SPA3102 > Advanced > International Control
    FXO Port Impedance: 270+750||150nF 
    OnHook Speed: 3ms (ETSI) 
    Current Limiting Enable: yes

SIP 设置：

Voice > PSTN > Proxy and Registration
   192.168.1.XXX
Voice > PSTN > Subscriber Information
    Display Name: PSTN
    User ID: <username set on asterisk>
    Password: <password set on asterisk>
Voice > PSTN > Dial PLans
    Dial Plan 2: S0(<:@gw0>)
Voice > PSTN > PSTN-To-VoIP Gateway Setup
    PSTN-To-VoIP Gateway Enable: Yes
    PSTN Ring Thru: Yes <Tried both Yes and No, neither worked>
    PSTN CID For VoIP CID: Yes
    PSTN Caller Default DP: 2
    Off Hook While Calling VoIP: No <Tried both Yes and No, neither worked>

为了节省询问：我已经检查了星号日志并且没有从 SPA 到星号服务器的连接，所以这不是身份验证失败的问题。

pbx