如图所示，我已经在 centos 机器和各个 centos 机器上的相应路由表之间配置了 GRE 隧道：
I dont have enough reputation to post images
Router1--------gre1---------Transit-Router---------gre2--------Router2
10.2.32.0/24--Router1--10.0.0.1---gre1---10.0.0.2--Transit-Router--11.0.0.2---gre2--11.0.0.1--Router2--10.4.32.0 /24
我能够从 Router-1 ping 到 gre1 隧道的另一端：
worker]# ping 10.0.0.2
PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data.
64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=1.43 ms
64 bytes from 10.0.0.2: icmp_seq=2 ttl=64 time=0.472 ms
64 bytes from 10.0.0.2: icmp_seq=3 ttl=64 time=0.291 ms
64 bytes from 10.0.0.2: icmp_seq=4 ttl=64 time=0.319 ms
流量通过 GRE 隧道到达 Transit Router（由 tcpdump proto gre 验证）
从 Router-2 ping 到 gre2 隧道另一端：
worker]# ping 11.0.0.2
PING 11.0.0.2 (11.0.0.2) 56(84) bytes of data.
64 bytes from 11.0.0.2: icmp_seq=1 ttl=64 time=1.10 ms
64 bytes from 11.0.0.2: icmp_seq=2 ttl=64 time=0.392 ms
64 bytes from 11.0.0.2: icmp_seq=3 ttl=64 time=0.369 ms
64 bytes from 11.0.0.2: icmp_seq=4 ttl=64 time=0.258 ms
此流量也在隧道上流动
在中转路由器上，我可以在添加路由条目后 ping 路由器 1 和路由器 2 的私有地址： 中转路由器：
[root@vmc-centos conf]# ping 10.2.32.1
PING 10.2.32.1 (10.2.32.1) 56(84) bytes of data.
64 bytes from 10.2.32.1: icmp_seq=1 ttl=64 time=0.589 ms
64 bytes from 10.2.32.1: icmp_seq=2 ttl=64 time=0.380 ms
64 bytes from 10.2.32.1: icmp_seq=3 ttl=64 time=0.383 ms
路由器 1：
worker]# tcpdump -i any proto gre -n
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on any, link-type LINUX_SLL (Linux cooked), capture size 65535 bytes
04:54:36.684864 IP 10.206.83.3 > 10.206.90.103: GREv0, length 88: IP 10.0.0.2 > 10.2.32.1: ICMP echo request, id 20445, seq 34, length 64
04:54:36.684951 IP 10.206.90.103 > 10.206.83.3: GREv0, length 88: IP 10.2.32.1 > 10.0.0.2: ICMP echo reply, id 20445, seq 34, length 64
04:54:37.684776 IP 10.206.83.3 > 10.206.90.103: GREv0, length 88: IP 10.0.0.2 > 10.2.32.1: ICMP echo request, id 20445, seq 35, length 64
中转路由器：
[root@vmc-centos conf]# ping 10.4.32.1
PING 10.4.32.1 (10.4.32.1) 56(84) bytes of data.
64 bytes from 10.4.32.1: icmp_seq=1 ttl=64 time=0.553 ms
64 bytes from 10.4.32.1: icmp_seq=2 ttl=64 time=0.325 ms
64 bytes from 10.4.32.1: icmp_seq=3 ttl=64 time=0.354 ms
路由器 2：
worker]# sudo tcpdump -i any proto gre -n
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on any, link-type LINUX_SLL (Linux cooked), capture size 65535 bytes
04:56:57.549823 IP 10.206.83.3 > 10.206.86.199: GREv0, length 88: IP 11.0.0.2 > 10.4.32.1: ICMP echo request, id 20690, seq 24, length 64
04:56:57.549896 IP 10.206.86.199 > 10.206.83.3: GREv0, length 88: IP 10.4.32.1 > 11.0.0.2: ICMP echo reply, id 20690, seq 24, length 64
但是现在当我尝试从路由器 1 到达路由器 2（10.4.32.1）的专用网络时，数据包到达中转路由器但没有从那里转发到路由器 2：路由器 1：
worker]# ping 10.4.32.1
PING 10.4.32.1 (10.4.32.1) 56(84) bytes of data.
中转路由器：
[root@vmc-centos conf]# tcpdump -i any proto gre -n
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on any, link-type LINUX_SLL (Linux cooked), capture size 262144 bytes
04:59:06.382024 IP 10.206.90.103 > 10.206.83.3: GREv0, length 88: IP 10.0.0.1 > 10.4.32.1: ICMP echo request, id 36131, seq 40, length 64
04:59:07.382007 IP 10.206.90.103 > 10.206.83.3: GREv0, length 88: IP 10.0.0.1 > 10.4.32.1: ICMP echo request, id 36131, seq 41, length 64
路由器 2：
[root@wdc-10-206-86-199 worker]# sudo tcpdump -i any proto gre -n
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on any, link-type LINUX_SLL (Linux cooked), capture size 65535 bytes
在所有机器上启用路由转发：
[root@vmc-centos conf]# sudo sysctl -p
net.ipv4.ip_forward = 1
中转路由器上的 iptables：
[root@vmc-centos ~]# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT gre -- anywhere anywhere
ACCEPT gre -- anywhere anywhere
Chain FORWARD (policy DROP)
target prot opt source destination
DOCKER-USER all -- anywhere anywhere
DOCKER-ISOLATION-STAGE-1 all -- anywhere anywhere
ACCEPT all -- anywhere anywhere ctstate RELATED,ESTABLISHED
DOCKER all -- anywhere anywhere
ACCEPT all -- anywhere anywhere
ACCEPT all -- anywhere anywhere
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
ACCEPT gre -- anywhere anywhere
Chain DOCKER (1 references)
target prot opt source destination
Chain DOCKER-ISOLATION-STAGE-1 (1 references)
target prot opt source destination
DOCKER-ISOLATION-STAGE-2 all -- anywhere anywhere
RETURN all -- anywhere anywhere
Chain DOCKER-ISOLATION-STAGE-2 (1 references)
target prot opt source destination
DROP all -- anywhere anywhere
RETURN all -- anywhere anywhere
Chain DOCKER-USER (1 references)
target prot opt source destination
RETURN all -- anywhere anywhere
注意：我之前已经尝试过，数据包正在到达另一个专用网络。现在我尝试另一种设置，我缺少一些配置。