Início / user-1106263

Saurav Niraula's questions

Martin Hope
Saurav Niraula
Asked: 2024-07-11 01:27:23 +0800 CST
  • 5

Quero testar a tabela NAT usando uma interface fictícia. Tenho a interface enp1s0 conectada à internet e configurei a tabela NAT para pacotes MASQUERADE conforme mostrado abaixo.

random@debian:~$ ip addr
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
        inet 127.0.0.1/8 scope host lo
           valid_lft forever preferred_lft forever
        inet6 ::1/128 scope host noprefixroute 
           valid_lft forever preferred_lft forever
    2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
        link/ether 52:54:00:4d:63:c0 brd ff:ff:ff:ff:ff:ff
        inet 192.168.122.10/24 brd 192.168.122.255 scope global enp1s0
           valid_lft forever preferred_lft forever
        inet6 fe80::5054:ff:fe4d:63c0/64 scope link 
           valid_lft forever preferred_lft forever
    3: dummy0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
        link/ether 5e:81:f3:78:47:c0 brd ff:ff:ff:ff:ff:ff
        inet 10.0.0.10/24 scope global dummy0
           valid_lft forever preferred_lft forever
        inet6 fe80::5c81:f3ff:fe78:47c0/64 scope link 
           valid_lft forever preferred_lft forever

random@debian:~$ ip route
default via 192.168.122.1 dev enp1s0 onlink 
10.0.0.0/24 dev dummy0 proto kernel scope link src 10.0.0.10 
192.168.122.0/24 dev enp1s0 proto kernel scope link src 192.168.122.10

random@debian:~$ sudo sysctl -w net.ipv4.ip_forward=1
net.ipv4.ip_forward = 1

random@debian:~$ lsmod | grep dummy
dummy                  16384  0

random@debian:~$ ipt
Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination

random@debian:~$ sudo iptables -t nat -A POSTROUTING -j MASQUERADE -s 10.0.0.0/24 -o enp1s0

random@debian:~$ ipt -t nat
Chain PREROUTING (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain INPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 MASQUERADE  all  --  any    enp1s0  10.0.0.0/24          anywhere

Com essas configurações de ip. Testando com ping

random@debian:~$ ping -I 10.0.0.10 8.8.8.8
PING 8.8.8.8 (8.8.8.8) from 10.0.0.10 : 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=114 time=28.3 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=114 time=30.9 ms
^C
--- 8.8.8.8 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1002ms
rtt min/avg/max/mdev = 28.302/29.583/30.865/1.281 ms

random@debian:~$ ping -I dummy0 8.8.8.8
PING 8.8.8.8 (8.8.8.8) from 10.0.0.10 dummy0: 56(84) bytes of data.
^C
--- 8.8.8.8 ping statistics ---
5 packets transmitted, 0 received, 100% packet loss, time 4095ms

O envio de pacotes através de interface fictícia não funciona. Os pacotes podem ser vistos na interface fictícia dummy0, mas não são encaminhados para enp1s0 conforme observado usando o wireshark.

iptables