通过 rufus 在 USB 上启动 esxi 时，我收到menu.c32 错误，据我所知，要修复此错误，您必须选择 yes 选项。但在此之后，我会遇到连接错误和下载失败错误 我使用的是 rufus 版本 3.18.1877，这是现在的最新版本，谁能指导我如何度过这个阶段？
鲁弗斯日志：
Rufus x86 v3.18.1877
Windows version: Windows 10 Enterprise, 64-bit (Build 19044.1706)
Syslinux versions: 4.07/2013-07-25, 6.04/pre1
Grub versions: 0.4.6a, 2.06
System locale ID: 0x0409 (en-US)
Will use default UI locale 0x0409
SetLGP: Successfully set NoDriveTypeAutorun policy to 0x0000009E
Localization set to 'en-US'
Found USB 2.0 device 'JetFlash Transcend 16GB USB Device' (8564:1000)
NOTE: This device is a USB 3.0 device operating at lower speed...
Using 'autorun.inf' label for drive D: 'HPE-ESXI-6.0.0-UPDATE3-ISO-600.9'
1 device found
Disk type: Removable, Disk size: 16 GB, Sector size: 512 bytes
Cylinders: 1909, Tracks per cylinder: 255, Sectors per track: 63
Partition type: MBR, NB Partitions: 1
Disk ID: 0xB552CA63
Drive has a Syslinux Master Boot Record
Partition 1:
Type: FAT32 LBA (0x0c)
Detected File System: FAT32
Size: 14.6 GB (15708258304 bytes)
Start Sector: 2048, Boot: Yes
Unable to send request: The attempt to connect to the server failed.
Scanning image...
ISO analysis:
Image is an ISO9660 image
Will use '/isolinux.cfg' for Syslinux
Detected Syslinux version: 3.86 (from '/isolinux.bin')
Disk image analysis:
Image does not have a Boot Marker
ISO label: 'ESXI-6.0.0-2494585-STANDARD'
Size: 348.3 MB (Projected)
Uses: Syslinux/Isolinux v3.86
With an old menu.c32
Uses: EFI
Using image: VMware-VMvisor-Installer-6.0.0-2494585.x86_64.iso (348.4 MB)
Checking for Rufus updates...
Checking release channel...
Unable to send request: The attempt to connect to the server failed.
Updates: Unable to access version data
Downloading https://rufus.ie/files/syslinux-4.07/menu.c32
Unable to send request: The attempt to connect to the server failed.
Could not download file - cancelling
Found USB 2.0 device 'JetFlash Transcend 16GB USB Device' (8564:1000)
NOTE: This device is a USB 3.0 device operating at lower speed...
Using 'autorun.inf' label for drive D: 'HPE-ESXI-6.0.0-UPDATE3-ISO-600.9'
1 device found
Disk type: Removable, Disk size: 16 GB, Sector size: 512 bytes
Cylinders: 1909, Tracks per cylinder: 255, Sectors per track: 63
Partition type: MBR, NB Partitions: 1
Disk ID: 0xB552CA63
Drive has a Syslinux Master Boot Record
Partition 1:
Type: FAT32 LBA (0x0c)
Detected File System: FAT32
Size: 14.6 GB (15708258304 bytes)
Start Sector: 2048, Boot: Yes