主页 / user-145362

Richard Barraclough's questions

Martin Hope
Richard Barraclough
Asked: 2023-10-22 10:46:40 +0800 CST
  • 5

你能让一个sh脚本调用另一个脚本吗？（显然不是。）

rwb@calleva:~/source$ ls -l
total 8
-rwxr--r-- 1 rwb rwb 50 Oct 22 03:38 caller.sh
-rwxr--r-- 1 rwb rwb 30 Oct 22 03:36 sourced.sh
rwb@calleva:~/source$ cat sourced.sh
#!/bin/sh

echo "sourced.sh"

rwb@calleva:~/source$ ./sourced.sh
sourced.sh
rwb@calleva:~/source$ cat caller.sh
#!/bin/sh

echo "caller.sh"

source ./sourced.sh

rwb@calleva:~/source$ ./caller.sh
caller.sh
./caller.sh: 5: source: Permission denied
rwb@calleva:~/source$
sh
Martin Hope
Richard Barraclough
Asked: 2020-10-21 04:18:26 +0800 CST
  • 5

使用两个 Internet 连接运行 Debian 10。

主连接断开并定期恢复。

什么时候wlan0倒下我怎么能enp0s6f1u2接手？互联网继续在本地机器上运行，但不适用于网络上的其他设备，因为wlan0它已硬编码到我的iptables脚本中。

我怎么说iptables：输出伪装到默认路由所在的任何接口？

/etc/network/interfaces

# The loopback network interface
auto lo
iface lo inet loopback

iface enp0s10 inet manual


### WiFi for access point

allow-hotplug wlx00e032800384
iface wlx00e032800384 inet manual
        pre-up ip link set dev wlx00e032800384 address 02:e0:32:80:03:80


### Bridge: internal network

auto br0
iface br0 inet static
#       bridge_ports enp0s10 wlx00e032800384
        bridge_ports enp0s10 ap_wep ap_open
        address 192.168.1.31
        netmask 255.255.255.0


### WiFi to Internet: physical plus virtual for each network defined in wpa_supplicant.conf

auto wlan0
allow-hotplug wlan0
iface wlan0 inet manual
        wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
#        wpa-ssid RWB
#        wpa-psk MYWIFI3518

allow-hotplug RWB
iface RWB inet dhcp
        metric 1


### 4G to Internet (failover)

auto enp0s6f1u2
allow-hotplug enp0s6f1u2
iface enp0s6f1u2 inet dhcp
        metric 9999

iptables脚本

#!/bin/sh

iptables -t nat -F
iptables -t mangle -F
iptables -F
iptables -X

# Squid transparent proxy for HTTP (not HTTPS)

iptables -t nat -A PREROUTING -i br0 -p tcp --dport 80 -j DNAT --to 192.168.1.31:3128
iptables -t nat -A PREROUTING -i br0 -p tcp --dport 80 -j REDIRECT --to-port 3128

# IP masquerade

iptables -A FORWARD -o wlan0 -i br0 -s 192.168.1.0/24 -m conntrack --ctstate NEW -j ACCEPT
iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
iptables -t nat -F POSTROUTING
iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE

# echo 1 > /proc/sys/net/ipv4/ip_forward

iptables-save > /etc/iptables/rules.v4

一些ip route

当两个接口都启动时：

# ip route
default via 192.168.43.40 dev wlan0 metric 1
default via 192.168.42.129 dev enp0s6f1u2 metric 9999
192.168.1.0/24 dev br0 proto kernel scope link src 192.168.1.31
192.168.42.0/24 dev enp0s6f1u2 proto kernel scope link src 192.168.42.221
192.168.43.0/24 dev wlan0 proto kernel scope link src 192.168.43.7

何时wlan0下降：

# ip route
default via 192.168.42.129 dev enp0s6f1u2 metric 9999
192.168.1.0/24 dev br0 proto kernel scope link src 192.168.1.31
192.168.42.0/24 dev enp0s6f1u2 proto kernel scope link src 192.168.42.221
iptables failover