AskOverflow.Dev

AskOverflow.Dev Logo AskOverflow.Dev Logo

AskOverflow.Dev Navigation

  • 主页
  • 系统&网络
  • Ubuntu
  • Unix
  • DBA
  • Computer
  • Coding
  • LangChain

Mobile menu

Close
  • 主页
  • 系统&网络
    • 最新
    • 热门
    • 标签
  • Ubuntu
    • 最新
    • 热门
    • 标签
  • Unix
    • 最新
    • 标签
  • DBA
    • 最新
    • 标签
  • Computer
    • 最新
    • 标签
  • Coding
    • 最新
    • 标签
主页 / ubuntu / 问题

问题[scrolling](ubuntu)

Martin Hope
Juan Antonio
Asked: 2020-10-25 06:35:54 +0800 CST

最近升级后滚动方向不断变化

  • 6

在最近一次内核升级后,我开始注意到一个烦人的问题:每次我更改笔记本电脑(Dell Inspiron 15)上的键盘/鼠标设置时,“自然滚动方向”都会发生变化。更具体地说,我在工作中有一套罗技设备,在家里有一套不同的设备(也是罗技)。似乎每次我切换外围设备时,滚动方向都会改变。我希望默认情况下保留自然滚动,而不是随意切换到“常规”滚动方向。

我相信这可能是在更新 5.4.0-52 64 位内核(Ubuntu 20.04 LTS,GNOME 版本 3.36.3)之后开始的。我应该注意到,大约在同一时间,我为家庭购买了一套新的键盘/鼠标组合,尽管直到几天后的内核更新我才注意到这个问题。

更糟糕的是,设置>鼠标和触摸板>鼠标>自然滚动中的切换按钮没有改变,但滚动方向改变了。也就是说,当我只是改变位置时,滚动方向是“常规的”,而自然滚动是打开的。要解决这个问题,我所要做的就是切换按钮两次,然后它会回到我喜欢的滚动方向。

有没有其他人遇到过这个问题?如果是这样,您建议以任何方式修复它,而不必每次更改外围设备时都更改方向。

mouse mouse-scroll scrolling
  • 2 个回答
  • 1463 Views
Martin Hope
Scrounger
Asked: 2020-10-13 00:59:40 +0800 CST

20.04 自然滚动不会在会话之间持续存在

  • 10

自更新以来,自然滚动工作得很好 - 直到重新启动。切换设置并再次打开就可以了,但相当……烦人。

感谢您的任何建议!

gnome reboot scrolling 20.04
  • 2 个回答
  • 2450 Views
Martin Hope
Ubuntovative is here
Asked: 2020-09-29 19:32:38 +0800 CST

Mailspring 滚动在 Ubuntu 18.04 上不起作用

  • 2

我在Dell Vostro 15 - 3546上使用Ubuntu 18.04。最近我通过 snap store 安装了 Mailspring。除非我使用外接鼠标并使用滚轮,否则右侧的滚动条不起作用。我该如何解决? 提前致谢!

email gmail scrollbar scrolling snap
  • 1 个回答
  • 94 Views
Martin Hope
Roshin Raphel
Asked: 2020-09-10 23:29:06 +0800 CST

通过在 Ubuntu 18.04 中滚动更改应用程序窗口

  • 2

我使用的是 Ubuntu 18.04,在其中我可以通过滚动侧窗格中的应用程序图标在应用程序窗口之间切换。

在此处输入图像描述

但是当我重新安装 Ubuntu 18.04 时,此功能不可用。

如何启用滚动切换应用程序窗口

?

gnome scrolling
  • 1 个回答
  • 257 Views
Martin Hope
Bluepanda4
Asked: 2020-08-26 02:05:01 +0800 CST

鼠标向上滚动在某些应用程序中不起作用

  • 0

向上滚动在某些应用程序中不起作用,例如 Firefox、Zotero,以及当我在 Atom/VS Code 中浏览“打开文件夹/文件”部分时。在其他环境(Konsole、Dolphine、基于 Chromium 的浏览器等)中,它可以完美运行。知道如何解决这个问题吗?

自从我将 18.04 LTS 升级到 19.04 后,这个问题就一直存在。


我目前的设置:

  • 操作系统:Ubuntu 20.04.1 LTS x86_64
  • 鼠标:(Logitech Gaming Mouse G600当我使用其他鼠标时也会出现同样的问题,所以我认为这个鼠标不是问题。

这是我到目前为止发现的:

  1. xev
  • 当我向上滚动时,“ButtonRelease 事件”和“ButtonPress 事件”不显示。
  • 模式(NotifyGrab 与 NotifyUngrab)和细节(NotifyVirtual 与 NotifyInferior)的差异

向上滑动

LeaveNotify event, serial 40, synthetic NO, window 0xd800001,
    root 0x6c9, subw 0xd800002, time 11818211, (27,58), root:(2935,585),
    mode NotifyGrab, detail NotifyVirtual, same_screen YES,
    focus YES, state 18432

EnterNotify event, serial 40, synthetic NO, window 0xd800001,
    root 0x6c9, subw 0xd800002, time 11818211, (27,58), root:(2935,585),
    mode NotifyUngrab, detail NotifyVirtual, same_screen YES,
    focus YES, state 16384

向下滚动

ButtonRelease event, serial 40, synthetic NO, window 0xd800001,
    root 0x6c9, subw 0xd800002, time 11885441, (42,35), root:(4344,59),
    state 0x1000, button 5, same_screen YES

LeaveNotify event, serial 40, synthetic NO, window 0xd800001,
    root 0x6c9, subw 0x0, time 11885441, (42,35), root:(4344,59),
    mode NotifyUngrab, detail NotifyInferior, same_screen YES,
    focus YES, state 0

ButtonPress event, serial 40, synthetic NO, window 0xd800001,
    root 0x6c9, subw 0xd800002, time 11885529, (42,35), root:(4344,59),
    state 0x0, button 5, same_screen YES

EnterNotify event, serial 40, synthetic NO, window 0xd800001,
    root 0x6c9, subw 0x0, time 11885529, (42,35), root:(4344,59),
    mode NotifyGrab, detail NotifyInferior, same_screen YES,
    focus YES, state 4096
  1. 输入
  • 您可以看到 button4(即向上滚动)没有关闭。
$ xinput get-button-map 10
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
mouse mouse-scroll scrolling
  • 1 个回答
  • 628 Views
Martin Hope
Allan
Asked: 2020-07-03 01:40:33 +0800 CST

如何在 Firefox、文档查看器等上缓慢滚动?

  • 2

我在右侧滚动条的顶部和底部没有看到用于执行此操作的箭头,只有滚动条本身。对于非常长的网页或文档,使用滚动条无法很好地控制一次向上和向下滚动一页或几页。

使用 Document Viewer,我试图向上和向下滚动正在阅读的 PDF 的单页,因为整个页面不会一次显示在屏幕上。即使我尝试使用滚动条上下移动页面,滚动条也不会随着鼠标指针移动,并且页面莫名其妙地开始自行上下移动,超出了我的控制。

请用英语!

firefox scrolling
  • 1 个回答
  • 104 Views
Martin Hope
skinnypete
Asked: 2020-06-18 00:19:03 +0800 CST

gui 和 dconf 编辑中没有自然滚动或两指右键单击选项不起作用 - 带有 Unity 桌面的 Ubuntu 20.04

  • 2

正如标题所示,我无法启用自然(澳大利亚/反向)滚动。我检查了通常的位置(系统设置 -> 鼠标和触摸板),但这是一个最小菜单,没有提及滚动。然后我使用 dconf 编辑器 GUI 编辑了 dconf 数据库,我将所有自然滚动布尔值设置为 true,但这也不起作用。最后我尝试使用 xinput 但我什至看不到 xinput 中的触摸板名称(虚拟核心输入或其他东西,但不是真正的硬件设备)。我正在使用华为 matebook D 14。我还想启用两指右键单击,因为此选项在设置中也没有。鼠标和触摸板设置看起来非常小,以至于我想知道我是否缺少配置文件或其他东西,在 ubuntu 中肯定有超过 2 个与鼠标或触摸板相关的设置。

提前感谢您的任何建议,如果没有简单的解决方案,请告诉我,因为我会简单地回到正常的 gnome 桌面。

谢谢阅读在此处输入图像描述在此处输入图像描述

编辑: xinput 的输出如下所示在此处输入图像描述

编辑 2: xinput list-props 11 的输出:

Device 'ELAN2204:00 04F3:3109 Touchpad':
Device Enabled (149):   1
Coordinate Transformation Matrix (151): 1.000000, 0.000000, 0.000000, 
0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
libinput Tapping Enabled (302): 0
libinput Tapping Enabled Default (303): 0
libinput Tapping Drag Enabled (304):    1
libinput Tapping Drag Enabled Default (305):    1
libinput Tapping Drag Lock Enabled (306):   0
libinput Tapping Drag Lock Enabled Default (307):   0
libinput Tapping Button Mapping Enabled (308):  1, 0
libinput Tapping Button Mapping Default (309):  1, 0
libinput Natural Scrolling Enabled (286):   0
libinput Natural Scrolling Enabled Default (287):   0
libinput Disable While Typing Enabled (310):    1
libinput Disable While Typing Enabled Default (311):    1
libinput Scroll Methods Available (288):    1, 1, 0
libinput Scroll Method Enabled (289):   1, 0, 0
libinput Scroll Method Enabled Default (290):   1, 0, 0
libinput Click Methods Available (312): 1, 1
libinput Click Method Enabled (313):    1, 0
libinput Click Method Enabled Default (314):    1, 0
libinput Middle Emulation Enabled (315):    0
libinput Middle Emulation Enabled Default (316):    0
libinput Accel Speed (293): 0.000000
libinput Accel Speed Default (294): 0.000000
libinput Left Handed Enabled (298): 0
libinput Left Handed Enabled Default (299): 0
libinput Send Events Modes Available (271): 1, 1
libinput Send Events Mode Enabled (272):    0, 0
libinput Send Events Mode Enabled Default (273):    0, 0
Device Node (274):  "/dev/input/event8"
Device Product ID (275):    1267, 12553
libinput Drag Lock Buttons (300):   <no items>
libinput Horizontal Scroll Enabled (301):   1

编辑 3:

感谢 Pilot6 的有用建议,我发现了一个可以实现自然滚动的命令:

xinput set-prop "ELAN2204:00 04F3:3109 Touchpad" 286 1

286 是指自然滚动的属性数。我现在唯一的问题是如何确保它在启动时运行。如果我找到一个,我会调查并发布我的答案。

unity touchpad dconf huawei scrolling
  • 1 个回答
  • 1250 Views
Martin Hope
Tom Mathew
Asked: 2020-01-22 20:49:43 +0800 CST

鼠标不断向下滚动

  • 4

我最近安装了一个新的 SSD 并在其上安装了 linux。我最初运行的是 Windows 10,现在我正在双启动 Windows 10 和 Ubuntu 18。操作系统的安装运行良好。但在那一天之后,我开始注意到我的鼠标一直在“向下滚动”,就好像我一直在向下滚动滚轮一样。我无法正确使用鼠标。我的鼠标所在的任何地方,就像我在那个位置不断向下滚动一样。

它不会一直发生。例如,我在网站上很好 -> 页面不会一直向下滚动。但是我打开了许多浏览器选项卡,如果我只是将鼠标移到其中一个选项卡上,最右边的选项卡就会被选中。如果我打开 LibreOffice,工作表会不断向右滚动。

有谁知道是什么原因造成的?

drivers mouse scrolling 18.04
  • 1 个回答
  • 1159 Views
Martin Hope
André Winston
Asked: 2019-11-23 08:37:54 +0800 CST

Ubuntu 18.04 在窗口之间切换时滚动跳转

  • 9

在 18.04.3 中,如果我在可滚动窗口(例如终端)中并向下滚动很多,然后alt+tab到另一个窗口(例如 Chrome)并在另一个窗口中滚动,它的滚动条会立即跳到底部。

使用鼠标或触摸板会发生这种情况。

如何解决第二个窗口的跳跃问题?

跑完之后

sudo lshw -C display && sudo lspci | grep -i vga

我明白了

  *-display                 
       description: VGA compatible controller
       product: HD Graphics 620
       vendor: Intel Corporation
       physical id: 2
       bus info: pci@0000:00:02.0
       version: 02
       width: 64 bits
       clock: 33MHz
       capabilities: pciexpress msi pm vga_controller bus_master cap_list rom
       configuration: driver=i915 latency=0
       resources: irq:128 memory:d0000000-d0ffffff memory:c0000000-cfffffff ioport:f000(size=64) memory:c0000-dffff
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 620 (rev 02)

编辑:我发现当第二个应用程序是终端或 firefox 时不会出现问题。事实上,我相信这个问题是谷歌浏览器独有的。

display scrolling 18.04
  • 1 个回答
  • 1398 Views
Martin Hope
Rodrigo
Asked: 2019-10-30 04:15:04 +0800 CST

无法在 Ubuntu 18.04.3 中使用 imwheel 更改滚动速度

  • 1

我正在尝试使用imwheel提高滚动速度,我已按照下面列出的 2 个来源中的说明进行操作,但即使在使用大乘数后我也没有看到速度发生变化。imwheel似乎在我没有收到任何错误消息的意义上起作用。关于可能出现问题的任何想法或提高系统滚动速度的任何替代方法?

  • http://www.webupd8.org/2015/12/how-to-change-mouse-scroll-wheel-speed.html
  • http://www.nicknorton.net/?q=node/10#comments

提前致谢!

mouse mouse-scroll scrolling
  • 1 个回答
  • 1392 Views

Sidebar

Stats

  • 问题 205573
  • 回答 270741
  • 最佳答案 135370
  • 用户 68524
  • 热门
  • 回答
  • Marko Smith

    如何运行 .sh 脚本?

    • 16 个回答
  • Marko Smith

    如何安装 .tar.gz(或 .tar.bz2)文件?

    • 14 个回答
  • Marko Smith

    如何列出所有已安装的软件包

    • 24 个回答
  • Marko Smith

    无法锁定管理目录 (/var/lib/dpkg/) 是另一个进程在使用它吗?

    • 25 个回答
  • Martin Hope
    Flimm 如何在没有 sudo 的情况下使用 docker? 2014-06-07 00:17:43 +0800 CST
  • Martin Hope
    Ivan 如何列出所有已安装的软件包 2010-12-17 18:08:49 +0800 CST
  • Martin Hope
    La Ode Adam Saputra 无法锁定管理目录 (/var/lib/dpkg/) 是另一个进程在使用它吗? 2010-11-30 18:12:48 +0800 CST
  • Martin Hope
    David Barry 如何从命令行确定目录(文件夹)的总大小? 2010-08-06 10:20:23 +0800 CST
  • Martin Hope
    jfoucher “以下软件包已被保留:”为什么以及如何解决? 2010-08-01 13:59:22 +0800 CST
  • Martin Hope
    David Ashford 如何删除 PPA? 2010-07-30 01:09:42 +0800 CST

热门标签

10.10 10.04 gnome networking server command-line package-management software-recommendation sound xorg

Explore

  • 主页
  • 问题
    • 最新
    • 热门
  • 标签
  • 帮助

Footer

AskOverflow.Dev

关于我们

  • 关于我们
  • 联系我们

Legal Stuff

  • Privacy Policy

Language

  • Pt
  • Server
  • Unix

© 2023 AskOverflow.DEV All Rights Reserve