主页 / ubuntu / 问题 / 24297
Accepted
Thiago Belem
Asked: 2011-02-02 06:08:02 +0800 CST

如何让 CardScan 60 II 与 SANE 配合使用？

  • 772

我有一个CardScan 60 II设备并在我的 Ubuntu 10.10 笔记本电脑上安装了SANE 。

问题是我无法scanimage找到设备。

引用：

$ sudo sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x08f0 [Corex Technologies Corporation], product=0x1000 [Corex CardScan 60], chip=LM9832/3) at libusb:006:002
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

但我找不到设备：

$ sudo scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
10.10

1 个回答

  1. Best Answer

    查看健全的卡片扫描软件，它似乎并不支持 CardScan 60 II。只有 CardScan 600c 和 800c 设备支持这个健全的驱动程序。

    可以通过将 usb id 添加到cardscan.conf文件并确保将相同的 id 添加到类似于40-libsane.rules. 但是所有这些工作可能只是表明该设备无论如何都无法工作。

    您需要与 cardScan 制造商取得联系，如果可能，请他们发布驱动程序，如果没有，请他们发布文档。我们需要知道这些设备是如何工作的以及协议是什么。否则，从头开始重新创建驱动程序将会很昂贵。

    • 0

相关问题