我正在使用带有两个驱动器的 Neoseries T24 (Flexstor II) 自动装载机。我在标有“已满”的池中有磁带(其中 11 个)。
当我为“完整”池运行两个作业时,它们将按顺序等待,以便它们都可以使用同一个驱动器 (0),而不是一个在驱动器 0 上运行,一个在驱动器 1 上运行。
这是因为我在标签过程中选择了驱动器 0 吗?
是否可以将完整池中的任何磁带作为自动加载器中的可用驱动器,以便可以同时运行两个作业?
是否需要运行两个 SD 守护程序?
** bareos-sd.d/server-sd.conf**
storage {
Name = server-sd
Maximum Concurrent Jobs = 20
# Plugin Directory = /usr/lib/bareos/plugins
# Plugin Names = ""
}
** bareos-sd.d/autochanger/autochanger-0.conf **
Autochanger {
Name = "FlexStor_II"
Changer Device = /dev/tape/by-id/scsi-1BDT_FlexStor_II_xxxxxxxxxxx_LL0
Device = ULTRIUM-HH7-0
Device = ULTRIUM-HH7-1
Changer Command = "/usr/lib/bareos/scripts/mtx-changer %c %o %S %a %d"
}
**少bareos-sd.d/device/ULTRIUM-HH7-0.conf **
Device {
Name = "ULTRIUM-HH7-0"
DeviceType = tape
DriveIndex = 0
ArchiveDevice = /dev/tape/by-id/scsi-xxxxxxxxxxxxxx001-nst
MediaType = LTO-7
AutoChanger = yes # default: no
AutomaticMount = yes # default: no
MaximumFileSize = 500GB # default: 1000000000 (1GB)
AlwaysOpen = yes
Autoselect = yes
RemovableMedia = yes
}
** bareos-sd.d/device/ULTRIUM-HH7-1.conf **
Device {
Name = "ULTRIUM-HH7-1"
DeviceType = tape
DriveIndex = 1
ArchiveDevice = /dev/tape/by-id/scsi-xxxxxxxxxxxxxx004-nst
MediaType = LTO-7
AutoChanger = yes # default: no
AutomaticMount = yes # default: no
MaximumFileSize = 500GB # default: 1000000000 (1GB)
AlwaysOpen = yes
Autoselect = yes
RemovableMedia = yes
}
** bareos-dir.d/storage/Tape.conf **
Storage {
Name = Tape
Address = server # N.B. Use a fully qualified name here (do not use "localhost" here).
Password = "e9cxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxg"
Device = FlexStor_II
Media Type = LTO-7
Autochanger = yes
}
从BareOS 文档: