主页 / server / 问题 / 569425
Accepted
sciurus
Asked: 2014-01-24 09:40:06 +0800 CST

Perc 电池显示为丢失

  • 772

我更换了 Perc 5/i 中的故障电池。原件和替换件是相同的 DLU8735 型号。我在手册中找不到任何特殊的电池更换程序，所以我只是关闭了系统并更换了它们。安装替换电池后，GetBbuStatus开始显示电池丢失。GetBbuCapacityInfo显示它正在充电，所以我认为这可能需要在使用电池之前完成。但是，它现在已 100% 收费，但仍报告为丢失。我想也许我需要强制一个学习周期，但这会立即完成，状态没有变化。系统已过保修期，所以我无法致电戴尔。关于为什么看到这种电池尚未使用的任何想法？

lspci | grep RAID

02:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID controller 5

MegaCli64 -AdpBbuCmd -BbuLearn -aALL

Adapter 0: BBU Learn Succeeded.

Exit Code: 0x00

MegaCli64 -AdpBbuCmd -GetBbuStatus -aALL

 BBU status for Adapter: 0

 BatteryType: No Battery
 Battery State: Missing

 Exit Code: 0x00

MegaCli64 -AdpBbuCmd -GetBbuCapacityInfo -aALL

 BBU Capacity Info for Adapter: 0

   Relative State of Charge: 100 %
   Absolute State of charge: 100 %
   Remaining Capacity: 1897 mAh
   Full Charge Capacity: 1900 mAh
   Run time to empty: Battery is not being charged.  
   Average time to empty: Battery is not being charged.  
   Estimated Time to full recharge: Battery is not being charged.  
   Cycle Count: 0
 Max Error = 0 %
 Remaining Capacity Alarm = 190 mAh
 Remining Time Alarm = 10 Min

 Exit Code: 0x00

MegaCli64 -AdpBbuCmd -GetBbuDesignInfo -aALL

 BBU Design Info for Adapter: 0

   Date of Manufacture: 11/15, 2007
   Design Capacity: 1900 mAh
   Design Voltage: 3700 mV
   Specification Info: 49
   Serial Number: 4471
   Pack Stat Configuration: 0xe4bc
   Manufacture Name: SANYO
   Firmware Version   : 
   Device Name: DLU8735
   Device Chemistry: LION
   Battery FRU: N/A
   Transparent Learn = 0
   App Data = 0

 Exit Code: 0x00

MegaCli64 -AdpBbuCmd -GetBbuProperties -aALL

 BBU Properties for Adapter: 0

   Auto Learn Period: 90 Days
   Next Learn time: Sat Jan  1 00:00:00 2000
   Learn Delay Interval:0 Hours
   Auto-Learn Mode: Enabled

 Exit Code: 0x00
dell-poweredge

1 个回答

  1. Best Answer

    听起来你的连接不好。其他人在用压缩空气吹灭 RAID 电池插头和插座后报告了成功。

    如果这不起作用，您将需要尝试更换 PERC 5/i（在 2014 年初，在良好使用状态下的成本不到 20 美元）和/或尝试使用另一块电池。

    • 3

相关问题