主页 / server / 问题 / 522548
Accepted
Halfgaar
Asked: 2013-07-12 05:58:21 +0800 CST

Debian 6 Xen 主机上的 ATA 错误，但磁盘很好

  • 772

我们管理的带有软件 RAID1 的 Debian 6 机器（但没有物理访问权限）正在喷出有关磁盘（ATA1 和 ATA2）的各种错误。

我不知道这可能是什么。磁盘似乎很好。我们没有注意到服务器正在服务的网站出现挂起或其他问题。

我知道这是一个“可能是任何事情”的问题，但我真的希望有人能够帮助我。

眼镜：

  1. Debian 6，运行 Xen 管理程序
  2. 磁盘：250 GB WDC WD2500AAKX-00U6AA0
  3. 支持和启用 NCQ：ata2.00：488397168 个扇区，多 16：LBA48 NCQ（深度 31/32），AA
  4. SATA 控制器：Intel Corporation Patsburg 6-Port SATA AHCI Controller (rev 06)
  5. 内核：2.6.32-5-xen-amd64
  6. 内存：16GB
  7. Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz

以下是一些错误：

[2013-05-13 21:36:17]  ata1.00: exception Emask 0x10 SAct 0x3 SErr 0x400100 action 0x6 frozen
[2013-05-13 21:36:17]  ata1.00: irq_stat 0x08000000, interface fatal error
[2013-05-13 21:36:17]  ata1: SError: { UnrecovData Handshk }
[2013-05-13 21:36:17]  ata1.00: failed command: WRITE FPDMA QUEUED
[2013-05-13 21:36:17]  ata1.00: cmd 61/08:00:98:1f:5e/00:00:0d:00:00/40 tag 0 ncq 4096 out
[2013-05-13 21:36:17]           res 40/00:0c:58:3a:62/00:00:0d:00:00/40 Emask 0x10 (ATA bus error)
[2013-05-13 21:36:17]  ata1.00: status: { DRDY }
[2013-05-13 21:36:17]  ata1.00: failed command: WRITE FPDMA QUEUED
[2013-05-13 21:36:17]  ata1.00: cmd 61/08:08:58:3a:62/00:00:0d:00:00/40 tag 1 ncq 4096 out
[2013-05-13 21:36:17]           res 40/00:0c:58:3a:62/00:00:0d:00:00/40 Emask 0x10 (ATA bus error)
[2013-05-13 21:36:17]  ata1.00: status: { DRDY }
[2013-05-13 21:36:17]  ata1: hard resetting link
[2013-05-13 21:36:17]  ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[2013-05-13 21:36:17]  ata1.00: configured for UDMA/133
[2013-05-13 21:36:17]  ata1: EH complete

和

[2013-05-15 08:58:29]  ata1.00: exception Emask 0x10 SAct 0x40f SErr 0x400100 action 0x6 frozen
[2013-05-15 08:58:29]  ata1.00: irq_stat 0x08000000, interface fatal error
[2013-05-15 08:58:29]  ata1: SError: { UnrecovData Handshk }
[2013-05-15 08:58:29]  ata1.00: failed command: WRITE FPDMA QUEUED
[2013-05-15 08:58:29]  ata1.00: cmd 61/58:00:48:c4:6b/00:00:0d:00:00/40 tag 0 ncq 45056 out
[2013-05-15 08:58:29]           res 40/00:1c:78:cb:6b/00:00:0d:00:00/40 Emask 0x10 (ATA bus error)
[2013-05-15 08:58:29]  ata1.00: status: { DRDY }
[2013-05-15 08:58:29]  ata1.00: failed command: WRITE FPDMA QUEUED
[2013-05-15 08:58:29]  ata1.00: cmd 61/10:08:78:c8:6b/01:00:0d:00:00/40 tag 1 ncq 139264 out
[2013-05-15 08:58:29]           res 40/00:1c:78:cb:6b/00:00:0d:00:00/40 Emask 0x10 (ATA bus error)
[2013-05-15 08:58:29]  ata1.00: status: { DRDY }
[2013-05-15 08:58:29]  ata1.00: failed command: WRITE FPDMA QUEUED
[2013-05-15 08:58:29]  ata1.00: cmd 61/b0:10:c8:ca:6b/00:00:0d:00:00/40 tag 2 ncq 90112 out
[2013-05-15 08:58:29]           res 40/00:1c:78:cb:6b/00:00:0d:00:00/40 Emask 0x10 (ATA bus error)
[2013-05-15 08:58:29]  ata1.00: status: { DRDY }
[2013-05-15 08:58:29]  ata1.00: failed command: WRITE FPDMA QUEUED
[2013-05-15 08:58:29]  ata1.00: cmd 61/58:18:78:cb:6b/00:00:0d:00:00/40 tag 3 ncq 45056 out
[2013-05-15 08:58:29]           res 40/00:1c:78:cb:6b/00:00:0d:00:00/40 Emask 0x10 (ATA bus error)
[2013-05-15 08:58:29]  ata1.00: status: { DRDY }
[2013-05-15 08:58:29]  ata1.00: failed command: WRITE FPDMA QUEUED
[2013-05-15 08:58:29]  ata1.00: cmd 61/b0:50:c8:c7:6b/00:00:0d:00:00/40 tag 10 ncq 90112 out
[2013-05-15 08:58:29]           res 40/00:1c:78:cb:6b/00:00:0d:00:00/40 Emask 0x10 (ATA bus error)
[2013-05-15 08:58:29]  ata1.00: status: { DRDY }
[2013-05-15 08:58:29]  ata1: hard resetting link
[2013-05-15 08:58:29]  ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[2013-05-15 08:58:29]  ata1.00: configured for UDMA/133
[2013-05-15 08:58:29]  ata1: EH complete

和

[2013-05-19 01:21:19]  ata2.00: exception Emask 0x10 SAct 0x3 SErr 0x400100 action 0x6 frozen
[2013-05-19 01:21:19]  ata2.00: irq_stat 0x08000000, interface fatal error
[2013-05-19 01:21:19]  ata2: SError: { UnrecovData Handshk }
[2013-05-19 01:21:19]  ata2.00: failed command: WRITE FPDMA QUEUED
[2013-05-19 01:21:19]  ata2.00: cmd 61/58:00:e8:75:93/00:00:12:00:00/40 tag 0 ncq 45056 out
[2013-05-19 01:21:19]           res 40/00:0c:40:76:93/00:00:12:00:00/40 Emask 0x10 (ATA bus error)
[2013-05-19 01:21:19]  ata2.00: status: { DRDY }
[2013-05-19 01:21:19]  ata2.00: failed command: WRITE FPDMA QUEUED
[2013-05-19 01:21:19]  ata2.00: cmd 61/b0:08:40:76:93/00:00:12:00:00/40 tag 1 ncq 90112 out
[2013-05-19 01:21:19]           res 40/00:0c:40:76:93/00:00:12:00:00/40 Emask 0x10 (ATA bus error)
[2013-05-19 01:21:19]  ata2.00: status: { DRDY }
[2013-05-19 01:21:19]  ata2: hard resetting link
[2013-05-19 01:21:19]  ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[2013-05-19 01:21:19]  ata2.00: configured for UDMA/133
[2013-05-19 01:21:19]  ata2: EH complete

SMART 不会给出任何错误。这是 SDA 的聪明之处（SDB 类似）：

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD2500AAKX-00U6AA0
Serial Number:    WD-WCC2H0107714
Firmware Version: 15.01H15
User Capacity:    250,059,350,016 bytes

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   145   145   021    Pre-fail  Always       -       3750
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       9
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       3430
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       7
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       6
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       2
194 Temperature_Celsius     0x0022   110   108   000    Old_age   Always       -       33
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

和 sda 接口错误：

# smartctl -l sataphy /dev/sda
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

General Purpose Logging (GPL) feature set supported
SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2          165  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2          165  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x000a  2           49  Device-to-host register FISes sent due to a COMRESET
0x000b  2           79  CRC errors within host-to-device FIS
0x8000  4     12672920  Vendor specific

和 sdb：

# smartctl -l sataphy /dev/sdb
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

General Purpose Logging (GPL) feature set supported
SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2           45  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2           45  R_ERR response for host-to-device data FIS
0x0005  2            2  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            2  R_ERR response for host-to-device non-data FIS
0x000a  2           46  Device-to-host register FISes sent due to a COMRESET
0x000b  2           22  CRC errors within host-to-device FIS
0x8000  4     12672927  Vendor specific
hard-drive

1 个回答

  1. Best Answer

    握手似乎表明控制器无法与驱动器通信。我怀疑电气干扰、电缆损坏或控制器可能损坏。在后一种情况下，需要更换主板。您只能通过排除过程找到罪魁祸首，即分别测试每个硬件。

    • 4

相关问题