我已将我的 EdgeRouter-X 设置为 WireGuard 客户端（使用 IPv6），以便我的公共 IP 显示为 WireGuard 服务器的公共 IP。
这是因为我想使用 OVH 的 IP 和 Anti-DDoS 来托管家庭服务器，而不是我自己的不受保护的公共 ip。
我有 4 个公共 IP：
22.22.22.22
33.33.33.33
44.44.44.44
55.55.55.55
我的连接图是这样的：
OVH VPS Wireguard Server WG0 Tunnel (LOCAL Tunnel 10.0.0.1) [Port forwarding with IPTables] <-----> (LOCAL Tunnel 10.0.0.2) EdgeRouter X
EdgeRouter-X (LOCAL 192.168.1.1) [Port forwarding with EdgeRouter] <-----> (LOCAL 192.168.1.10) HOME-SERVER
我正在通过 wg0 隧道将 OVH 的 VPS (1-65535) 的所有端口与 IPTables 转发到我的 EdgeRouter，然后转发到我的家庭服务器，这样就可以了。
问题是当用户连接到 22.22.22.22:80 时，他成功显示了网页，但他到服务器的 IP 是 10.0.0.1 而不是用户公共 IP。
这是我的 WG 服务器配置：
[Interface]
Address = 10.0.0.1/30
ListenPort = 51821
PrivateKey = CENSORED
### Client vpn
[Peer]
PublicKey = CENSORED
PresharedKey = CENSORED
AllowedIPs = 10.0.0.2/30
这是我的 WG 服务器 IPTables 配置，用于通过 WG0 将端口转发到 EdgeRouter：
# Generated by iptables-save v1.8.7 on Sun Jan 9 11:04:33 2022
*filter
:INPUT ACCEPT [971:145912]
:FORWARD ACCEPT [920:137172]
:OUTPUT ACCEPT [637:108812]
:f2b-sshd - [0:0]
COMMIT
# Completed on Sun Jan 9 11:04:33 2022
# Generated by iptables-save v1.8.7 on Sun Jan 9 11:04:33 2022
*nat
:PREROUTING ACCEPT [133:6792]
:INPUT ACCEPT [61:2272]
:OUTPUT ACCEPT [3:228]
:POSTROUTING ACCEPT [66:4011]
-A PREROUTING -i ens3 -p udp -m multiport --dports 1000:51820 -j DNAT --to-destination 10.0.0.2
-A PREROUTING -i ens3 -p udp -m multiport --dports 51822:65534 -j DNAT --to-destination 10.0.0.2
-A PREROUTING -i ens3 -p tcp -m multiport --dports 51822:65534 -j DNAT --to-destination 10.0.0.2
-A PREROUTING -i ens3 -p tcp -m multiport --dports 1000:51820 -j DNAT --to-destination 10.0.0.2
-A PREROUTING -i ens3 -p tcp -m multiport --dports 80,25,995,110,443,465,993,143 -j DNAT --to-destination 10.0.0.2
-A PREROUTING -i ens3 -p udp -m multiport --dports 80,25,995,110,443,465,993,143 -j DNAT --to-destination 10.0.0.2
-A POSTROUTING -j MASQUERADE
COMMIT
# Completed on Sun Jan 9 11:04:33 2022
这是我的 EdgeRouter-X 配置，带有 WG0 客户端和端口转发到家庭服务器：
firewall {
all-ping enable
broadcast-ping disable
group {
address-group MY_PUBLIC {
address 22.22.22.22
address 33.33.33.33
address 44.44.44.44
address 55.55.55.55
}
}
ipv6-name WANv6_IN {
default-action drop
description "WAN inbound traffic forwarded to LAN"
enable-default-log
rule 10 {
action accept
description "Allow established/related sessions"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
ipv6-name WANv6_LOCAL {
default-action drop
description "WAN inbound traffic to the router"
enable-default-log
rule 10 {
action accept
description "Allow established/related sessions"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
rule 30 {
action accept
description "Allow IPv6 icmp"
protocol ipv6-icmp
}
rule 40 {
action accept
description "allow dhcpv6"
destination {
port 546
}
protocol udp
source {
port 547
}
}
}
ipv6-receive-redirects disable
ipv6-src-route disable
ip-src-route disable
log-martians enable
modify wireguard_route {
rule 5 {
action modify
destination {
group {
address-group MY_PUBLIC
}
}
modify {
table main
}
}
rule 10 {
action modify
description wireguard-vpn
modify {
table 1
}
source {
address 192.168.1.0/24
}
}
}
name WAN_IN {
default-action drop
description "WAN to internal"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
name WAN_LOCAL {
default-action drop
description "WAN to router"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
receive-redirects disable
send-redirects enable
source-validation disable
syn-cookies enable
}
interfaces {
ethernet eth0 {
address dhcp
description Internet
dhcpv6-pd {
pd 0 {
interface eth1 {
service dhcpv6-stateful
}
interface eth2 {
service dhcpv6-stateful
}
interface eth3 {
service dhcpv6-stateful
}
interface switch0 {
host-address ::1
service slaac
}
prefix-length /64
}
rapid-commit enable
}
duplex auto
firewall {
in {
ipv6-name WANv6_IN
name WAN_IN
}
local {
ipv6-name WANv6_LOCAL
name WAN_LOCAL
}
}
ipv6 {
address {
autoconf
}
dup-addr-detect-transmits 1
}
speed auto
}
ethernet eth1 {
description Local
duplex auto
speed auto
}
ethernet eth2 {
description Local
duplex auto
speed auto
}
ethernet eth3 {
description Local
duplex auto
speed auto
}
ethernet eth4 {
description Local
duplex auto
poe {
output off
}
speed auto
}
loopback lo {
}
switch switch0 {
address 192.168.1.1/24
description Local
firewall {
in {
modify wireguard_route
}
}
mtu 1500
switch-port {
interface eth1 {
}
interface eth2 {
}
interface eth3 {
}
interface eth4 {
}
vlan-aware disable
}
}
wireguard wg0 {
address 10.0.0.2/30
description Wireguard
listen-port 51821
mtu 1420
peer CENSORED {
allowed-ips 0.0.0.0/0
endpoint [2001:41d0:52:400::6e3]:51821
persistent-keepalive 25
preshared-key /config/auth/wg-preshared.key
}
private-key /config/auth/wg.key
route-allowed-ips false
}
}
port-forward {
auto-firewall enable
hairpin-nat enable
lan-interface switch0
rule 1 {
description "Allow ALL"
forward-to {
address 192.168.1.10
}
original-port 1-65535
protocol tcp_udp
}
wan-interface wg0
}
protocols {
static {
table 1 {
description "table to force wg0:aws"
interface-route 0.0.0.0/0 {
next-hop-interface wg0 {
}
}
route 0.0.0.0/0 {
blackhole {
distance 255
}
}
}
}
}
service {
dhcp-server {
disabled false
hostfile-update disable
shared-network-name LAN {
authoritative enable
subnet 192.168.1.0/24 {
default-router 192.168.1.1
dns-server 192.168.1.1
lease 86400
start 192.168.1.38 {
stop 192.168.1.243
}
static-mapping Node2 {
ip-address 192.168.1.10
mac-address 90:b1:1c:44:f6:da
}
static-mapping iDRAC {
ip-address 192.168.1.120
mac-address E0:DB:55:06:2D:14
}
}
}
static-arp disable
use-dnsmasq disable
}
dns {
forwarding {
cache-size 150
listen-on switch0
}
}
gui {
http-port 80
https-port 443
older-ciphers enable
}
nat {
rule 5002 {
description wireguard-nat
log disable
outbound-interface wg0
protocol all
source {
address 192.168.1.0/24
}
type masquerade
}
rule 5003 {
description "masquerade for WAN"
log disable
outbound-interface eth0
protocol all
type masquerade
}
}
ssh {
port 22
protocol-version v2
}
unms {
}
}
system {
analytics-handler {
send-analytics-report false
}
crash-handler {
send-crash-report false
}
host-name EdgeRouter-X-5-Port
login {
user ubnt {
authentication {
encrypted-password
}
level admin
}
}
ntp {
server 0.ubnt.pool.ntp.org {
}
server 1.ubnt.pool.ntp.org {
}
server 2.ubnt.pool.ntp.org {
}
server 3.ubnt.pool.ntp.org {
}
}
offload {
hwnat enable
ipsec enable
}
syslog {
global {
facility all {
level notice
}
facility protocols {
level debug
}
}
}
time-zone UTC
}
通过更改解决：
和：