Configurações > Data e Hora mostram opções corretas, mas o relógio na parte superior da tela exibe números (hora de 24:40) que não fazem sentido (embora a data esteja correta). Veja a captura de tela
EHJ's questions
Estou usando o Ubuntu 20.04 e acabei de executar uma atualização do Flatpak (vers 1.12.7). Houve dois erros. O primeiro (re: Freedesktop SDK 19.08 runtime
) apareceu aleatoriamente ultimamente, mas o segundo é novo. Que ação devo tomar, se houver?
eddie@hp-laptop:~$ flatpak update
Looking for updates…
Info: org.freedesktop.Sdk//19.08 is end-of-life, with reason:
The Freedesktop SDK 19.08 runtime is no longer supported as of September 1, 2021. Please ask your application developer to migrate to a supported version
Info: org.freedesktop.Platform.VAAPI.Intel//19.08 is end-of-life, with reason:
The Freedesktop SDK 19.08 runtime is no longer supported as of September 1, 2021. Please ask your application developer to migrate to a supported version
Info: org.freedesktop.Platform.GL.default//19.08 is end-of-life, with reason:
The Freedesktop SDK 19.08 runtime is no longer supported as of September 1, 2021. Please ask your application developer to migrate to a supported version
1. com.play0ad.zeroad.Locale stable u flathub < 114 bytes (partial)
2. com.play0ad.zeroad stable u flathub < 1.7 GB
3. org.mozilla.firefox.Locale stable u flathub < 45.5 MB (partial)
4. org.mozilla.firefox stable u flathub < 87.4 MB
Updating 1/4…
Updating 1/4… 0% 0 bytes/s
Updating 1/4… ████████████████████ 100%
Updating 2/4…
Updating 2/4… 0% 0 bytes/s
Updating 2/4… ▏ 1%
Updating 2/4… █████████████▊ 69%
Updating 2/4… ████████████████ 80%
Updating 2/4… █████████████████▊ 89% 16.0 MB/s
Updating 2/4… █████████████████▊ 89% 20.5 MB/s
Updating 2/4… ██████████████████▌ 93% 25.3 MB/s
Updating 2/4… ███████████████████▏ 96% 13.2 MB/s
Updating 2/4… ████████████████████ 100% 13.2 MB/s
Updating 3/4…
Updating 3/4… 0% 0 bytes/s
Updating 3/4… ▊ 4%
Updating 3/4… ███████████████▌ 78%
Updating 3/4… ███████████████████▊ 99%
Updating 3/4… ████████████████████ 100% 6.2 MB/s
Updating 4/4…
Updating 4/4… 0% 0 bytes/s
Updating 4/4… ████████████████████ 100%
Note that '/var/lib/flatpak/exports/share' is not in the search path
set by the XDG_DATA_HOME and XDG_DATA_DIRS
environment variables, so applications may not
be able to find it until you set them. The
directories currently searched are:
- /root/.local/share
- /usr/local/share/
- /usr/share/
Estou tentando instalar o Dconf Editor.
Eu criei um diretório, mudei para ele e depois executei
git clone https://gitlab.gnome.org/GNOME/dconf-editor.git
Procurei um script de instalação, não existe, mas existe um README.md
arquivo. No entanto, o conteúdo do arquivo é:
# Dconf-Editor
A GSettings editor for GNOME.
## Useful links
- Homepage: <https://wiki.gnome.org/Apps/DconfEditor>
- Report issues: <https://gitlab.gnome.org/GNOME/dconf-editor/issues/>
- Translate: <https://wiki.gnome.org/TranslationProject>
- Code of Conduct: <https://gitlab.gnome.org/GNOME/dconf-editor/blob/master/code-of-conduct.md
Quando tento executar make
, apenas diz que não há arquivo make. Existe um arquivo chamado meson.build
então eu instalei meson
e tentei usá-lo
$ sudo meson builddir && cd builddir
The Meson build system
Version: 0.53.2
Source dir: /home/eddie/build/dconf-editor
Build dir: /home/eddie/build/dconf-editor/builddir
Build type: native build
Project name: dconf-editor
Project version: 3.38.2
meson.build:1:0: ERROR: Could not execute Vala compiler "valac"`
Como faço isso funcionar?
Aprendi a usar um computador com DOS, então estou tentando aproximar um arquivo batch/.bat para executar todas as atualizações no meu sistema e criar um arquivo de log do resultado.
#!/bin/bash
#update system in one step
cd ~
date > aupdate.log
echo Launching updates...
echo Beginning apt update
sudo apt update >> aupdate.log
sudo apt upgrade -y >> aupdate.log
echo Completing apt autoremove process
sudo apt autoremove -y >> aupdate.log
echo Beginning snap update
sudo snap refresh >> aupdate.log
echo Beginning flatpak update
flatpak update -y >> aupdate.log
echo Updates complete. Review aupdate.log for details.
Estou no caminho certo? Até agora tenho dois problemas que preciso resolver.
- Nenhum arquivo de log está sendo criado
- Como faço para suprimir o aviso sobre o redirecionamento de saída ao executar apt > filename (EDIT: Veja abaixo)
Edit: Este é o resultado quando executo o script:
Launching updates...
Beginning apt updates
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
Completing apt autoremove process
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
Beginning snap update
All snaps up to date.
Beginning flatpak update
Updates complete. Review aupdate.log for details.
EDIT: Com base em alguns comentários iniciais dos comentários, alterei o script
#!/bin/bash
#update system in one step. Vers 1.1
date > ~/aupdate.log
echo Beginning update...
echo Beginning apt-get updates
apt-get update >> ~/aupdate.log
apt-get upgrade -y >> ~/aupdate.log
echo Completing apt autoremove process
apt-get autoremove -y >> ~/aupdate.log
echo Beginning snap update
snap refresh >> ~/aupdate.log 2>/dev/null
echo Beginning flatpak update
flatpak update -y >> ~/aupdate.log
echo Updates complete. Review aupdate.log for details.
Mudar para apt-get
resolver o aviso e usar 2>/dev/null
com a snap
linha suprimiu uma saída instantânea que acabei de notar. Também removi sudo
das linhas porque executo o script como su. No entanto, ainda não há arquivo de log
EDIT: Este é o resultado quando executo o script agora e ls
depois.
eddie@mrpbell5:~$ sudo ./aupdate.sh
Beginning update...
Beginning apt-get updates
Completing apt autoremove process
Beginning snap update
Beginning flatpak update
Updates complete. Review aupdate.log for details.
eddie@mrpbell5:~$ ls ~ | grep log
eddie@mrpbell5:~$ ls -a
. .bash_history .cache .config Downloads .local Music .profile src .surfshark Videos
.. .bash_logout .cert Desktop .gnome move Pictures Public .ssh Templates .wget-hsts
aupdate.sh .bashrc CiscoSpark Documents .gnupg .mozilla .pki snap .sudo_as_admin_successful .var .zoom
Após uma atualização recente, meu adaptador wifi USB parou de funcionar. O adaptador embutido funcionou, mas não é compatível com 5ghz. De alguma forma, na minha tentativa de consertar o wifi USB, matei o interno também. Só consigo acessar a Internet usando o tethering USB com meu telefone. Uma das últimas coisas que fiz antes do wifi interno parar de funcionar foi remover um arquivo cfg80211. Abaixo estão os dados de diagnóstico que espero que ajudem alguém a me ajudar a resolver o adaptador wifi interno, pelo menos eu tenho isso.
########## wireless info START ##########
Report from: 27 Apr 2022 17:15 CDT -0500
Booted last: 27 Apr 2022 00:00 CDT -0500
Script from: 25 Jan 2020 03:34 UTC +0000
##### release ###########################
Distributor ID: Ubuntu
Description: Ubuntu 20.04.4 LTS
Release: 20.04
Codename: focal
##### kernel ############################
Linux 5.13.0-40-generic #45~20.04.1-Ubuntu SMP Mon Apr 4 09:38:31 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux
Parameters: ro, quiet, splash, vt.handoff=7
##### desktop ###########################
Ubuntu
##### lspci #############################
07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller [10ec:8136] (rev 07)
Subsystem: Hewlett-Packard Company RTL810xE PCI Express Fast Ethernet controller [103c:81ef]
Kernel driver in use: r8169
0d:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723]
Subsystem: Hewlett-Packard Company RTL8723BE PCIe Wireless Network Adapter [103c:81c1]
Kernel modules: rtl8723be
##### lsusb #############################
Bus 001 Device 002: ID 8087:8001 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 005: ID 0eef:c04d D-WAV Scientific Co., Ltd eGalaxTouch EXC3000-0367-44.01.00
Bus 002 Device 004: ID 05c8:022a Cheng Uei Precision Industry Co., Ltd (Foxlink) HP Webcam
Bus 002 Device 003: ID 0bda:b008 Realtek Semiconductor Corp. Bluetooth Radio
Bus 002 Device 010: ID 04e8:6863 Samsung Electronics Co., Ltd Galaxy series, misc. (tethering mode)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
##### PCMCIA card info ##################
##### rfkill ############################
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
##### secure boot #######################
SecureBoot disabled
##### lsmod #############################
hp_wmi 16384 0
platform_profile 16384 1 hp_wmi
sparse_keymap 16384 1 hp_wmi
wmi_bmof 16384 0
wmi 32768 2 hp_wmi,wmi_bmof
##### interfaces ########################
##### ifconfig ##########################
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback <MAC address> brd <MAC address>
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp7s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN group default qlen 1000
link/ether <MAC 'enp7s0' [IF1]> brd <MAC address>
4: usb0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
link/ether <MAC 'usb0' [IF2]> brd <MAC address>
inet 192.168.107.86/24 brd 192.168.107.255 scope global dynamic noprefixroute usb0
valid_lft 3591sec preferred_lft 3591sec
inet6 fe80::a45c:12e5:ae4a:1cd5/64 scope link noprefixroute
valid_lft forever preferred_lft forever
##### iwconfig ##########################
lo no wireless extensions.
enp7s0 no wireless extensions.
usb0 no wireless extensions.
##### route #############################
default via 192.168.107.141 dev usb0 proto dhcp metric 100
169.254.0.0/16 dev usb0 scope link metric 1000
192.168.107.0/24 dev usb0 proto kernel scope link src 192.168.107.86 metric 100
##### resolv.conf #######################
[644 root '/etc/resolv.conf']
nameserver 127.0.0.53
##### network managers ##################
Installed:
NetworkManager
Running:
root 863 1 0 17:09 ? 00:00:00 /usr/sbin/NetworkManager --no-daemon
##### NetworkManager info ###############
GENERAL.DEVICE: usb0
GENERAL.TYPE: ethernet
GENERAL.NM-TYPE: NMDeviceEthernet
GENERAL.DBUS-PATH: /org/freedesktop/NetworkManager/Devices/5
GENERAL.VENDOR: Samsung Electronics Co., Ltd
GENERAL.PRODUCT: Galaxy series, misc. (tethering mode)
GENERAL.DRIVER: rndis_host
GENERAL.DRIVER-VERSION: 5.13.0-40-generic
GENERAL.FIRMWARE-VERSION: RNDIS device
GENERAL.HWADDR: <MAC 'usb0' [IF2]>
GENERAL.MTU: 1500
GENERAL.STATE: 100 (connected)
GENERAL.REASON: 0 (No reason given)
GENERAL.IP4-CONNECTIVITY: 4 (full)
GENERAL.IP6-CONNECTIVITY: 4 (full)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/net/usb0
GENERAL.IP-IFACE: usb0
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: Wired connection 2
GENERAL.CON-UUID: 8fee193d-edfc-3f27-a634-d3cecb149e8b
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/2
GENERAL.METERED: yes (guessed)
CAPABILITIES.CARRIER-DETECT: yes
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
INTERFACE-FLAGS.UP: yes
INTERFACE-FLAGS.LOWER-UP: yes
INTERFACE-FLAGS.CARRIER: yes
WIRED-PROPERTIES.CARRIER: on
IP4.ADDRESS[1]: 192.168.107.86/24
IP4.GATEWAY: 192.168.107.141
IP4.ROUTE[1]: dst = 0.0.0.0/0, nh = 192.168.107.141, mt = 100
IP4.ROUTE[2]: dst = 192.168.107.0/24, nh = 0.0.0.0, mt = 100
IP4.ROUTE[3]: dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS[1]: 192.168.107.141
DHCP4.OPTION[1]: dhcp_lease_time = 3599
DHCP4.OPTION[2]: domain_name_servers = 192.168.107.141
DHCP4.OPTION[3]: expiry = 1651101339
DHCP4.OPTION[4]: host_name = mrpbell5
DHCP4.OPTION[5]: ip_address = 192.168.107.86
DHCP4.OPTION[6]: next_server = 192.168.107.141
DHCP4.OPTION[7]: requested_broadcast_address = 1
DHCP4.OPTION[8]: requested_domain_name = 1
DHCP4.OPTION[9]: requested_domain_name_servers = 1
DHCP4.OPTION[10]: requested_domain_search = 1
DHCP4.OPTION[11]: requested_host_name = 1
DHCP4.OPTION[12]: requested_interface_mtu = 1
DHCP4.OPTION[13]: requested_ms_classless_static_routes = 1
DHCP4.OPTION[14]: requested_nis_domain = 1
DHCP4.OPTION[15]: requested_nis_servers = 1
DHCP4.OPTION[16]: requested_ntp_servers = 1
DHCP4.OPTION[17]: requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[18]: requested_root_path = 1
DHCP4.OPTION[19]: requested_routers = 1
DHCP4.OPTION[20]: requested_static_routes = 1
DHCP4.OPTION[21]: requested_subnet_mask = 1
DHCP4.OPTION[22]: requested_time_offset = 1
DHCP4.OPTION[23]: requested_wpad = 1
DHCP4.OPTION[24]: routers = 192.168.107.141
DHCP4.OPTION[25]: subnet_mask = 255.255.255.0
IP6.ADDRESS[1]: fe80::a45c:12e5:ae4a:1cd5/64
IP6.GATEWAY: --
IP6.ROUTE[1]: dst = fe80::/64, nh = ::, mt = 100
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/24
CONNECTIONS.AVAILABLE-CONNECTIONS[1]: 8fee193d-edfc-3f27-a634-d3cecb149e8b | Wired connection 2
GENERAL.DEVICE: <MAC address>
GENERAL.TYPE: bt
GENERAL.NM-TYPE: NMDeviceBt
GENERAL.DBUS-PATH: /org/freedesktop/NetworkManager/Devices/3
GENERAL.VENDOR: --
GENERAL.PRODUCT: --
GENERAL.DRIVER: bluez
GENERAL.DRIVER-VERSION: --
GENERAL.FIRMWARE-VERSION: --
GENERAL.HWADDR: <MAC address>
GENERAL.MTU: 0
GENERAL.STATE: 30 (disconnected)
GENERAL.REASON: 0 (No reason given)
GENERAL.IP4-CONNECTIVITY: 1 (none)
GENERAL.IP6-CONNECTIVITY: 1 (none)
GENERAL.UDI: /org/bluez/hci0/dev_E0_D0_83_C2_1F_74
GENERAL.IP-IFACE: --
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: --
GENERAL.CON-UUID: --
GENERAL.CON-PATH: --
GENERAL.METERED: unknown
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
INTERFACE-FLAGS.UP: no
INTERFACE-FLAGS.LOWER-UP: no
INTERFACE-FLAGS.CARRIER: no
BLUETOOTH.CAPABILITIES: NAP
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/8
CONNECTIONS.AVAILABLE-CONNECTIONS[1]: 81a72a28-8664-411d-b177-c115c6ef2d99 | EDDIE's S10+ Network
GENERAL.DEVICE: enp7s0
GENERAL.TYPE: ethernet
GENERAL.NM-TYPE: NMDeviceEthernet
GENERAL.DBUS-PATH: /org/freedesktop/NetworkManager/Devices/2
GENERAL.VENDOR: Realtek Semiconductor Co., Ltd.
GENERAL.PRODUCT: RTL810xE PCI Express Fast Ethernet controller
GENERAL.DRIVER: r8169
GENERAL.DRIVER-VERSION: 5.13.0-40-generic
GENERAL.FIRMWARE-VERSION: --
GENERAL.HWADDR: <MAC 'enp7s0' [IF1]>
GENERAL.MTU: 1500
GENERAL.STATE: 20 (unavailable)
GENERAL.REASON: 2 (Device is now managed)
GENERAL.IP4-CONNECTIVITY: 1 (none)
GENERAL.IP6-CONNECTIVITY: 1 (none)
GENERAL.UDI: /sys/devices/pci0000:00/0000:00:1c.2/0000:07:00.0/net/enp7s0
GENERAL.IP-IFACE: --
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: --
GENERAL.CON-UUID: --
GENERAL.CON-PATH: --
GENERAL.METERED: unknown
CAPABILITIES.CARRIER-DETECT: yes
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
INTERFACE-FLAGS.UP: yes
INTERFACE-FLAGS.LOWER-UP: no
INTERFACE-FLAGS.CARRIER: no
WIRED-PROPERTIES.CARRIER: off
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: --
##### NetworkManager.state ##############
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
##### NetworkManager config #############
[[/etc/NetworkManager/conf.d/default-wifi-powersave-on.conf]]
[connection]
wifi.powersave = 3
[[/etc/NetworkManager/NetworkManager.conf]]
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
[device]
wifi.scan-rand-mac-address=no
[[/usr/lib/NetworkManager/conf.d/10-dns-resolved.conf]]
[main]
dns=systemd-resolved
[[/usr/lib/NetworkManager/conf.d/10-globally-managed-devices.conf]]
[keyfile]
unmanaged-devices=*,except:type:wifi,except:type:gsm,except:type:cdma
[[/usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf]]
[connectivity]
uri=http://connectivity-check.ubuntu.com/
[[/usr/lib/NetworkManager/conf.d/no-mac-addr-change.conf]]
[device-mac-addr-change-wifi]
match-device=driver:rtl8723bs,driver:rtl8189es,driver:r8188eu,driver:8188eu,driver:eagle_sdio,driver:wl
wifi.scan-rand-mac-address=no
##### NetworkManager profiles ###########
[[/etc/NetworkManager/system-connections/StacysDadIsReallyReallyRad.nmconnection]] (600 root)
[connection] id=StacysDadIsReallyReallyRad | type=wifi | permissions=
[wifi] mac-address-blacklist= | ssid=StacysDadIsReallyReallyRad
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Wyndris306.nmconnection]] (600 root)
[connection] id=Wyndris306 | type=wifi | permissions=
[wifi] mac-address-blacklist= | ssid=Wyndris306
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/ThereAreFourLights.nmconnection]] (600 root)
[connection] id=ThereAreFourLights | type=wifi | permissions=
[wifi] mac-address-blacklist= | ssid=ThereAreFourLights
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/CenturyLink1689_5G 1.nmconnection]] (600 root)
[connection] id=CenturyLink1689_5G 1 | type=wifi | permissions=
[wifi] mac-address-blacklist= | ssid=CenturyLink1689_5G
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/StacysDadIsReallyReallyRad 1.nmconnection]] (600 root)
[connection] id=StacysDadIsReallyReallyRad 1 | type=wifi | permissions=
[wifi] mac-address-blacklist= | ssid=StacysDadIsReallyReallyRad
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/CenturyLink1689.nmconnection]] (600 root)
[connection] id=CenturyLink1689 | type=wifi | permissions=
[wifi] mac-address-blacklist= | ssid=CenturyLink1689
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/KAI_SU_TEKNON.nmconnection]] (600 root)
[connection] id=KAI_SU_TEKNON | type=wifi | permissions=
[wifi] mac-address-blacklist= | ssid=KAI_SU_TEKNON
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/SHPA-Staff.nmconnection]] (600 root)
[connection] id=SHPA-Staff | type=wifi | permissions=
[wifi] mac-address-blacklist= | ssid=SHPA-Staff
[ipv4] method=auto
[ipv6] method=auto
##### Netplan config ####################
[/etc/netplan/01-network-manager-all.yaml]
network:
version: 2
renderer: NetworkManager
##### iw reg get ########################
nl80211 not found.
##### iwlist channels ###################
lo no frequency information.
enp7s0 no frequency information.
usb0 no frequency information.
##### iwlist scan #######################
lo Interface doesn't support scanning.
enp7s0 Interface doesn't support scanning.
usb0 Interface doesn't support scanning.
##### module infos ######################
##### module parameters #################
##### /etc/modules ######################
##### modprobe options ##################
[/etc/modprobe.d/8821cu.conf]
options 8821cu rtw_drv_log_level=0 rtw_led_ctrl=1 rtw_vht_enable=1 rtw_power_mgnt=1
[/etc/modprobe.d/amd64-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci
[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac
[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off
[/etc/modprobe.d/intel-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211
##### rc.local ##########################
grep: /etc/rc.local: No such file or directory
##### pm-utils ##########################
##### udev rules ########################
##### dmesg #############################
[ 12.257869] r8169 0000:07:00.0 enp7s0: Link is Down
[ 181.778003] rndis_host 2-3:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-3, RNDIS device, <MAC address>
[ 306.509105] rndis_host 2-3:1.0 usb0: unregister 'rndis_host' usb-0000:00:14.0-3, RNDIS device
[ 352.392867] rndis_host 2-3:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-3, RNDIS device, <MAC 'usb0' [IF2]>
########## wireless info END ############