Monitoramento de status RAID HPE Smart Array E208i-p SR Gen10

Não deve ser tão difícil, mas não consigo descobrir como monitorar o status do RAID com o HPE Smart Array E208i-p SR Gen10, em um HP ProLiant DL360 Gen10 no Linux.

• Não consigo encontrar um arquivo em /procou /sys.
• arcconfdiz: Controllers found: 0.
• ssacli controller all showdiz:Error: No controllers detected.
• O mesmo para HP SSA CLI :Error: No controllers detected.

Edit: ficou um pouco confuso porque este servidor possui dois controladores RAID, mas nenhum deles funciona até agora, então a pergunta é a mesma.

Esta é a lspci -vsaída do E208i-p:

  11:00.0 Serial Attached SCSI controller: Adaptec Smart Storage PQI 12G SAS/PCIe 3 (rev 01)
  Subsystem: Hewlett-Packard Company Smart Array E208i-p SR Gen10
  Physical Slot: 1
  Flags: bus master, fast devsel, latency 0, IRQ 26, NUMA node 0
  Memory at e2800000 (64-bit, non-prefetchable) [size=32K]
  I/O ports at 4000 [size=256]
  Capabilities: [80] Power Management version 3
  Capabilities: [b0] MSI-X: Enable+ Count=64 Masked-
  Capabilities: [c0] Express Endpoint, MSI 00
  Capabilities: [100] Advanced Error Reporting
  Capabilities: [300] #19
  Kernel driver in use: smartpqi
  Kernel modules: smartpqi

Este do P408i-a:

    b1:00.0 Serial Attached SCSI controller: Adaptec Smart Storage PQI 12G SAS/PCIe 3 (rev 01)
    Subsystem: Hewlett-Packard Company Smart Array P408i-a SR Gen10
    Flags: bus master, fast devsel, latency 0, IRQ 32, NUMA node 0
    Memory at f3800000 (64-bit, non-prefetchable) [size=32K]
    I/O ports at c000 [size=256]
    Capabilities: [80] Power Management version 3
    Capabilities: [b0] MSI-X: Enable+ Count=64 Masked-
    Capabilities: [c0] Express Endpoint, MSI 00
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [300] #19
    Kernel driver in use: smartpqi
    Kernel modules: smartpqi

Versão Linux:

cat /etc/lsb-release 
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=18.04
DISTRIB_CODENAME=bionic
DISTRIB_DESCRIPTION="Ubuntu 18.04.4 LTS"

Edit: em um servidor de ordem ligeiramente, com 'Controladores Hewlett-Packard Company Smart Array Gen9 (rev 01) / Hewlett-Packard Company P440', a hpssacliferramenta funciona.