我最近将一台旧机器重新用作 NAS。我刚刚添加了 4 个 HDD，打算将它们设置为 RAID 1+0。这是 HP Proliant Microserver Gen8。我在 RAID 控制器中设置了驱动器，但一旦启动，它显示为 4 个单独的驱动器而不是 1 个逻辑驱动器。我在这里想念什么？我确信它应该显示为一个驱动器。
lspci -v
00:1f.2 RAID bus controller: Intel Corporation 6 Series/C200 Series Desktop SATA RAID Controller (rev 05)
Subsystem: Hewlett Packard Enterprise 6 Series/C200 Series Desktop SATA RAID Controller
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 32, NUMA node 0
I/O ports at 10c0 [size=8]
I/O ports at 10c8 [size=4]
I/O ports at 10d0 [size=8]
I/O ports at 10d8 [size=4]
I/O ports at 10e0 [size=32]
Memory at facd0000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
fdisk -l
Disk /dev/sdc: 3.65 TiB, 4000787030016 bytes, 7814037168 sectors
Disk model: ST4000VN008-2DR1
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/sdd: 3.65 TiB, 4000787030016 bytes, 7814037168 sectors
Disk model: ST4000VN008-2DR1
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/sde: 3.65 TiB, 4000787030016 bytes, 7814037168 sectors
Disk model: ST4000VN008-2DR1
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk /dev/sdf: 3.65 TiB, 4000787030016 bytes, 7814037168 sectors
Disk model: ST4000VN008-2DR1
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
我打算删除这篇文章，但我认为最好把信息放在那里。这个“硬件突袭”是软件支持的。也就是说，你需要在“Smart Storage Administration”层之外配置这个raid；从操作系统内部。在 debian 中有对此的支持，但是对此的支持很少，所以我决定为我的用例使用软件突袭会更聪明。这是我能找到的：https ://www.jimmdenton.com/hp-raid-tools-ubuntu/