Início / user-18571

parsley72's questions

Martin Hope
parsley72
Asked: 2024-07-22 12:18:55 +0800 CST
  • 6

Eu configurei meu modem LTE com NetworkManager/ModemManager e está funcionando bem. Também configurei o Wifi como ponto de acesso no NetworkManager com DHCP.

Mas como posso compartilhar o acesso à Internet do modem LTE via Wifi? Habilitei o encaminhamento de IP ( echo 1 > /proc/sys/net/ipv4/ip_forward), o que mais há?

# ifconfig
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:12946 errors:0 dropped:0 overruns:0 frame:0
          TX packets:12946 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1297231 (1.2 MiB)  TX bytes:1297231 (1.2 MiB)

wlan0     Link encap:Ethernet  HWaddr E8:4F:25:DD:BD:51
          inet addr:10.42.0.1  Bcast:10.42.0.255  Mask:255.255.255.0
          inet6 addr: fe80::ea4f:25ff:fedd:bd51/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:77 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:12101 (11.8 KiB)

wwan0     Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr:100.72.254.176  P-t-P:100.72.254.176  Mask:255.255.255.224
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:1808 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2176 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:356293 (347.9 KiB)  TX bytes:261384 (255.2 KiB)

# ip route
default via 100.72.254.177 dev wwan0  metric 700
10.42.0.0/24 dev wlan0 scope link  src 10.42.0.1  metric 600
100.72.254.160/27 dev wwan0 scope link  src 100.72.254.176  metric 700

O DHCP para o Wifi é feito pelo NetworkManager iniciando o dnsmasq com parâmetros padrão:

# ps -eF | grep dnsmasq
nobody      1104     606  0  1285  2444   0 09:05 ?        00:00:00 /usr/bin/dnsmasq --conf-file=/dev/null --no-hosts --keep-in-foreground --bind-interfaces --except-interface=lo --clear-on-reload --strict-order --listen-address=10.42.0.1 --dhcp-range=10.42.0.10,10.42.0.254,60m --dhcp-lease-max=50 --dhcp-leasefile=/var/lib/NetworkManager/dnsmasq-wlan0.leases --pid-file=/var/run/nm-dnsmasq-wlan0.pid --conf-dir=/etc/NetworkManager/dnsmasq-shared.d

ref NetworkManager e intervalo de endereços dnsmasq dhcp ).

# cat /etc/NetworkManager/system-connections/ap.nmconnection
[connection]
id=ap
uuid=3205b229-8c4d-4766-8d63-bcd949d03321
type=wifi
autoconnect=false
interface-name=wlan0

[wifi]
band=bg
channel=1
mode=ap
ssid=MySSID

[wifi-security]
group=ccmp;
key-mgmt=wpa-psk
pairwise=ccmp;
proto=rsn;
psk=MyPSK

[ipv4]
method=shared

[ipv6]
addr-gen-mode=stable-privacy
method=ignore

[proxy]

Um colega sugeriu https://github.com/oblique/create_ap . Tentei as opções NAT e bridge, mas ambas falharam.

NAT:

# create_ap -w 2 wlan0 wwan0 APTest 12345678
WARN: brmfmac driver doesn't work properly with virtual interfaces and
      it can cause kernel panic. For this reason we disallow virtual
      interfaces for your adapter.
      For more info: https://github.com/oblique/create_ap/issues/203
WARN: Your adapter does not fully support AP virtual interface, enabling --no-virt
Config dir: /tmp/create_ap.wlan0.conf.XX59Vdf8
PID: 537195
Network Manager found, set wlan0 as unmanaged device... [46988.754925] ieee80211 phy1: brcmf_set_pmk: failed to change PSK in firmware (len=0)
[46988.784848] ieee80211 phy1: brcmf_vif_set_mgmt_ie: vndr ie set error : -52
[46988.792027] ieee80211 phy1: brcmf_vif_set_mgmt_ie: vndr ie set error : -52
DONE
Sharing Internet using method: nat
iptables v1.8.7 (legacy): unknown option "--to-ports"
Try `iptables -h' or 'iptables --help' for more information.

Doing cleanup.. done

Ponte:

# create_ap -w 2 -m bridge wlan0 wwan0 APTest 12345678
WARN: brmfmac driver doesn't work properly with virtual interfaces and
      it can cause kernel panic. For this reason we disallow virtual
      interfaces for your adapter.
      For more info: https://github.com/oblique/create_ap/issues/203
WARN: Your adapter does not fully support AP virtual interface, enabling --no-virt
Config dir: /tmp/create_ap.wlan0.conf.XXgGPNON
PID: 540585
Network Manager found, set wlan0 as unmanaged device... DONE
Sharing Internet using method: bridge
Create a bridge interface... ip: RTNETLINK answers: Operation not supported
networkmanager
Martin Hope
parsley72
Asked: 2023-06-13 07:29:39 +0800 CST
  • 8

Tendo alguns problemas para fazer uma cópia no bash. Isso funciona bem:

# Enable extended globbing and include filenames beginning with a '.'
shopt -s extglob dotglob
# Copy git repo to expected place
cp -r !($YOCTO_DIR) $POKY_DIR/$GIT_REPO_NAME/

Mas quando coloco uma ifdeclaração em volta disso:

if [ -z "$FROM_JENKINS" ]; then
    # FROM_JENKINS is blank, this is a local build

    # Enable extended globbing and include filenames beginning with a '.'
    shopt -s extglob dotglob
    # Copy git repo to expected place
    cp -r !($YOCTO_DIR) $POKY_DIR/$GIT_REPO_NAME/
fi

Eu recebo:

./build.sh: linha 80: erro de sintaxe perto do token inesperado `('

A linha 80 é o arquivo cp. Se eu remover os colchetes, funciona:

cp -r . $POKY_DIR/$GIT_REPO_NAME/

Por que a ifdeclaração não gosta de colchetes cp?

bash